|
Welcome to the GSM-Forum forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. Only registered members may post questions, contact other members or search our database of over 8 million posts. Registration is fast, simple and absolutely free so please - Click to REGISTER! If you have any problems with the registration process or your account login, please contact contact us . |
|
Register | FAQ | Donate | Forum Rules | Root any Device | ★iPhone Unlock★ | ★ Direct Codes ★ | Direct Unlock Source |
Universal GSM Software Write here for questions about Universal GSM Software. Example: USPU, twinsim, sms-soft, drivers... |
| LinkBack | Thread Tools | Display Modes |
02-19-2010, 12:40 | #1 (permalink) |
No Life Poster Join Date: Feb 2008 Location: Misiones
Posts: 1,197
Member: 710759 Status: Offline Sonork: No Thanks Meter: 329 | :: Maemo Flasher 3.5_2.5.2.2 :: Flasher-3.5 NAME flasher-3.5 - Maemo flasher tool SYNOPSIS Usage: flasher-3.5 [OPTIONS] DESCRIPTION The flasher tool is used to flash data to the Maemo device internal 256MB of NAND, which is where the bootloader, kernel, and rootfs (all of which make up the operating system) are stored. Flasher can be used to upgrade the firmware, wipe the Maemo device and start from scratch, flash certain specific components, or change a number of hardware flags. OPTIONS -F, --fiasco=ARG Location of a FIASCO image -k, --kernel=ARG Location of kernel image -n, --initfs=ARG Location of initfs image -r, --rootfs=ARG Location of root JFFS2 image --cmt-2nd=ARG Location of CMT FIASCO 2nd image --cmt-algo=ARG Location of CMT FIASCO algorithm image --cmt-mcusw=ARG Location of CMT FIASCO MCUSW image --cmt-no-verify Disable verification of CMT programming -x, --xloader=ARG Location of X-Loader image -s, --secondary=ARG Location of NOLO secondary bootloader image -2, --2nd=ARG Location of NOLO cold flasher ("2nd") image -u, --unpack[=ARG] Unpack a FIASCO image -f, --flash Load and flash all supplied images -l, --load Only load all supplied images -b, --boot[=ARG] Boot the kernel with optional cmdline -R, --reboot Reboot the board (e.g. after flashing NOLO) -i, --read-device-id Print out the device type -S, --serial-port=ARG Serial port used for cold flashing or "usb" -I, --init-port Only initialize the serial port -c, --cold-flash "Cold flash" the device -h, --hw-revision=ARG Specify product code and HW revision --enable-rd-mode Enable R&D mode on the device --disable-rd-mode Disable R&D mode on the device --set-rd-flags[=ARG] Set R&D mode flags on the device --clear-rd-flags[=ARG] Clear R&D mode flags on the device --query-rd-mode Query the device R&D mode status and flags --set-hw-revision[=ARG] Set HW revision override on device --flash-only=ARG Flash only certain components -U, --usb-device=ARG Specify USB device to use (bus:device address) Valid --flash-only options: nolo, kernel, initfs, rootfs Valid --set-rd-flags and --clear-rd-flags options: no-omap-wd no-ext-wd no-lifeguard-reset serial-console no-usb-timeout sti-console no-charging force-power-key EXAMPLES To flash a image to the Maemo device, open a terminal on your computer, then run: $ flasher-3.5 -F <FIASCO image> -f -R Replace <FIASCO image> with the firmware image you downloaded from Nokia. This will flash a FIASCO image to your Maemo device and reboot device after it’s done (at which point, you can unplug the USB). The procedure is the same for all other image flashing components (like separate kernel, rootfs and eMMC images), see the option list for details. If you wish to do other commands than image flashing, then omit the -R option as rebooting Maemo device may reset given configuration change back to normal. 1) To flash a kernel with separate kernel image, open a terminal on your computer, then run: $ flasher-3.5 -k <kernel zImage> -f -R 2) If you do not have separate images, but want to flash just a part of the whole FIASCO image you can do so by running: $ flasher-3.5 -F <FIASCO image> --flash-only=rootfs -R This will flash just the rootfs from the FIASCO image and reboot the device. 3) If you need access to the individual parts of the FIASCO image, it can be unpacked by running: $ flasher-3.5 -F <FIASCO image> -u Which will expand it to your current directory. 4) To cold flash (needed usually when the bootloader has been changed) run: $ flasher-3.5 -c -h RX-51:<hwid> -F <FIASCO image> -S usb The 'hwid' in the command options is a 4-digit code that can be found from the type label of the device to be flashed. [IMG]http://2.bp.********.com/_jzFOOHRsqBM/S3L5dd6cUWI/AAAAAAAAAYI/hAz5Eib47W0/s320/n900.jpg[/IMG] maemo_flasher-3.5_2.5.2.2.exe Download BR Gaabiunlock |
The Following 5 Users Say Thank You to Gabiunlock For This Useful Post: |
03-20-2010, 03:27 | #4 (permalink) | |
Freak Poster Join Date: Feb 2008 Location: Bangadesh.Dhaka
Posts: 350
Member: 694638 Status: Offline Sonork: no Thanks Meter: 164 | Maemo flasher tool help Quote:
Very nice work &thank you very much brother. I have no idea about 'flasher-3.5 - Maemo flasher tool' Please tell me about 'flasher-3.5 - Maemo flasher tool' What is its work? How to use this & have any risk? What models support? Thanks Advance to answer those question. | |
The Following User Says Thank You to mdalamgir For This Useful Post: |
06-09-2011, 10:34 | #5 (permalink) |
Registered User Join Date: Oct 2008 Location: Phillipines
Posts: 9
Member: 874101 Status: Offline Thanks Meter: 1 | thnks for this sw....i had n900 that always "LOW IN MEMORY'. i cant open cam,messags,etc... i've already flash the phone with maemo with updated bin file.but the same prblm.. can u help me to flash it with EMMC VANILLA..? THANKs!! |
Bookmarks |
| |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
N900 hangup successfully flashed/updated by MAEMO Flasher 3.5 | professor linux | Nokia Windows & MeaMo/MeeGo based | 55 | 12-10-2016 16:27 |
N900 maemo flasher 3.5 problem | ahmad5175 | Nokia Windows & MeaMo/MeeGo based | 8 | 03-29-2011 09:33 |