Motowin 9.7 error 2801 - GSM-Forum

hymer544 · 01-31-2007, 17:50

I have a roemmi 2 and Motokey and using Teleway manual for motokey I can use all direct functions in Motowin 9.7, and I can read logos etc, but when I try to read flash I get error message 2801.

I have connected the motokey directly to the roemmi 2, plugged it into the lpt port and connected it to usb and to the phone, I get a green light when connecting to the usb and I get a red light when I switch on the phone.

I have selected 4mb as the flash size and have entered the firmware (AC.06.27) into the "select bin file area" and pressed "save" then when I press "read flash" the phone disconnects and comes up error 2801.

There is no sim card in the phone and I have tried on four different pc,s using either win 98 se and win xp with same result.

If anyone can offer some advice it would be gratefully received

ps I am wanting to read the flash from a Jaguar startac 130 to put into another startac 130 if this is relevant.

kb501x · 02-11-2007, 00:46

Hi,
this happens to me before and i was wondering if the roemmi device is the problem. but i had error 2401..or something like that. the problem is that the roemmi if very senstive to voltage even i was using the USB for the power but still i was not able to flash the phones ....ect.. my trick was to add a diode in series with the +. so open the roemmi cut the track coming from the USB and solder a diode i used 1n4001. and then try.
let us know if this helps.
Also my advice i found using Pemaster only if better.this is upon my experience.
Regards,
Kello

hymer544 · 02-12-2007, 17:31

Thank you I will try these suggestions

foneworkshop · 11-09-2007, 13:46

Hi Guys,

Re the jaguar Startac. i have read the Flex file from a jaguar Startac and re-flexed another phone and copied the bitmap for the logo. Ive also done the 57# reset. Problem is the phone doesn't work after...will not pick up UK networks. Anyone had this problem

Cheers

startac130 · 08-18-2010, 14:15

Hi all, i know this is an old thread, but you never know,

I'm still wondering if somebody has information or experience with flashing a normal startac 130 working in a jaguar incarkit? Did is work finally??

Thanx, Ivar

01-31-2007, 17:50	#1 (permalink)
hymer544 Junior Member Join Date: Apr 2005 Posts: 14 Member: 133404 Status: Offline Thanks Meter: 0	Motowin 9.7 error 2801 I have a roemmi 2 and Motokey and using Teleway manual for motokey I can use all direct functions in Motowin 9.7, and I can read logos etc, but when I try to read flash I get error message 2801. I have connected the motokey directly to the roemmi 2, plugged it into the lpt port and connected it to usb and to the phone, I get a green light when connecting to the usb and I get a red light when I switch on the phone. I have selected 4mb as the flash size and have entered the firmware (AC.06.27) into the "select bin file area" and pressed "save" then when I press "read flash" the phone disconnects and comes up error 2801. There is no sim card in the phone and I have tried on four different pc,s using either win 98 se and win xp with same result. If anyone can offer some advice it would be gratefully received ps I am wanting to read the flash from a Jaguar startac 130 to put into another startac 130 if this is relevant.

11-09-2007, 13:46	#4 (permalink)
foneworkshop Major Poster Join Date: May 2002 Location: liverpool Age: 68 Posts: 42 Member: 11819 Status: Offline Thanks Meter: 4	Jaguar Startac Hi Guys, Re the jaguar Startac. i have read the Flex file from a jaguar Startac and re-flexed another phone and copied the bitmap for the logo. Ive also done the 57# reset. Problem is the phone doesn't work after...will not pick up UK networks. Anyone had this problem Cheers

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Oxygen Phone Manager II for Nokia Phones v2.0.9.7 MULTI FREE!	yagus	Nokia Multimedia	7	01-24-2003 04:26
I Need the full oxygen phone manager 2.9.7 please ?!	mysterious	Nokia Multimedia	0	01-20-2003 20:28
motkey 9,7	vidas	Motorola Old Legacy (EMMI)	3	06-17-2002 17:31
Need Motokey 9.7 or Zuleas download area password+login!	WaldemarT	Motorola Old Legacy (EMMI)	1	06-16-2002 21:37

02-11-2007, 00:46	#2 (permalink)
kb501x Freak Poster Join Date: Feb 2004 Age: 63 Posts: 213 Member: 52276 Status: Offline Thanks Meter: 0	Hi, this happens to me before and i was wondering if the roemmi device is the problem. but i had error 2401..or something like that. the problem is that the roemmi if very senstive to voltage even i was using the USB for the power but still i was not able to flash the phones ....ect.. my trick was to add a diode in series with the +. so open the roemmi cut the track coming from the USB and solder a diode i used 1n4001. and then try. let us know if this helps. Also my advice i found using Pemaster only if better.this is upon my experience. Regards, Kello

02-12-2007, 17:31	#3 (permalink)
hymer544 Junior Member Join Date: Apr 2005 Posts: 14 Member: 133404 Status: Offline Thanks Meter: 0	Thank you I will try these suggestions

08-18-2010, 14:15	#5 (permalink)
startac130 Junior Member Join Date: Aug 2010 Posts: 3 Member: 1367537 Status: Offline Thanks Meter: 0	Hi all, i know this is an old thread, but you never know, I'm still wondering if somebody has information or experience with flashing a normal startac 130 working in a jaguar incarkit? Did is work finally?? Thanx, Ivar