pinout info for Emmi-box - GSM-Forum

Probe1 · 05-20-2000, 02:27

Hi,is there someone who can help me out??
I have an Emmi-box and want to unlock the phones that have the pins at the back of the phone,therefore i appreciate if somebode could send me pinouts of those phones and the pinout config of the emmi-box,or point me to a site where i can find this information.
I´ve surfed thru loads of internet sites but i can´t seem to find any info on the Emmi-box nor pinouts of Mot.phones.
TnX a lot.
http://www.thoic.net/gsm/ubb/smile.gif
Probe

[This message has been edited by Probe1 (edited 20 May 2000).]

gsmjohn · 05-20-2000, 05:22

hello probe1 I have the pin outs for the t2288 on the phone but do not know which to connect to at socket end.also do you know how to enter new language into phones with emmi box?can you re lock ?

Probe1 · 05-22-2000, 00:07

Hi,only if you flex the phone you can change languages,this can be done with the EMMI 2 box.
for the pins you need only uplink ,downlink, interrupt(DSC-EN) and gnd.
The Problem i have is that the T2288 (with the pins at the backside of the phone) when i push the ON button, the EMMI detects master but falls back into detect phone mode.
This way i am not sure if i use the correct pinout,so if you have those plse send them.
If you know a website with onfo on EMMI connections as well i´m interested.
TnX
Probe

Sandino · 05-22-2000, 00:41

There is info about m-series http://members.*******.chello.nl/~m....ans/index.html

05-20-2000, 02:27	#1 (permalink)
Probe1 Junior Member Join Date: Dec 1999 Posts: 33 Member: 809 Status: Offline Thanks Meter: 0	pinout info for Emmi-box Hi,is there someone who can help me out?? I have an Emmi-box and want to unlock the phones that have the pins at the back of the phone,therefore i appreciate if somebode could send me pinouts of those phones and the pinout config of the emmi-box,or point me to a site where i can find this information. I´ve surfed thru loads of internet sites but i can´t seem to find any info on the Emmi-box nor pinouts of Mot.phones. TnX a lot. http://www.thoic.net/gsm/ubb/smile.gif Probe [This message has been edited by Probe1 (edited 20 May 2000).]

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need help setting up lpt port for emmi box	NUGSM	Motorola Old Legacy (EMMI)	4	08-13-2001 12:47
Working software for EMMI Box..	JammerOne	Motorola Old Legacy (EMMI)	0	04-29-2001 14:35
Anybody have hex for EMMI-box for M-series version C3?	Invader	Motorola Old Legacy (EMMI)	0	08-29-2000 15:59
Need soft for m3588(asian) c3_11_09 for emmi-box	TS	Motorola Old Legacy (EMMI)	1	07-07-2000 01:05
Schematics for EMMI-BOX ?	Squesch	Motorola Old Legacy (EMMI)	4	07-03-2000 20:25

05-20-2000, 05:22	#2 (permalink)
gsmjohn Junior Member Join Date: May 2000 Location: united kingdom Posts: 10 Member: 1368 Status: Offline Thanks Meter: 1	hello probe1 I have the pin outs for the t2288 on the phone but do not know which to connect to at socket end.also do you know how to enter new language into phones with emmi box?can you re lock ?

05-22-2000, 00:07	#3 (permalink)
Probe1 Junior Member Join Date: Dec 1999 Posts: 33 Member: 809 Status: Offline Thanks Meter: 0	Hi,only if you flex the phone you can change languages,this can be done with the EMMI 2 box. for the pins you need only uplink ,downlink, interrupt(DSC-EN) and gnd. The Problem i have is that the T2288 (with the pins at the backside of the phone) when i push the ON button, the EMMI detects master but falls back into detect phone mode. This way i am not sure if i use the correct pinout,so if you have those plse send them. If you know a website with onfo on EMMI connections as well i´m interested. TnX Probe

05-22-2000, 00:41	#4 (permalink)
Sandino Freak Poster Join Date: Mar 2000 Location: Bulgaria Age: 54 Posts: 162 Member: 1128 Status: Offline Thanks Meter: 13	There is info about m-series http://members.*******.chello.nl/~m....ans/index.html