Test/Clone Card on Goldwafer problems. Please help ! - GSM-Forum

Squesch · 10-20-2001, 03:38

I have problems writing the hex file of the motorola clone/test card to a goldwafer 16f84/24c16 card. I have two different files in hex format, but both break down when writing with error message "verify error at adress h000" using IC-Prog and PonyProg. I have JDM interface which is definitifly ok, because of it writes other files without any errors. after writing card is absolutly empty. card is ok.

what is the problem ? how to solve it ?

thank you very much !

bye Squesch

[email protected]

Squesch · 10-20-2001, 03:40

forgot to tell that i already have tested ludipipo with same misaccess.

Squesch

fm-gsm · 10-20-2001, 16:15

Hi All hex files in the web are old. it works only whith the old motorola (before septembre 1998). you can't read the card because the hex file use the CP active (Code Protect) Send me this files i will test it [email protected] regards

NUGSM · 10-20-2001, 18:13

Make sure all the fuses are not checked when you write the hex, i had the exact problem unchecked the fuses and it all worked fine

Squesch · 10-20-2001, 20:20

thanks ! i now have a working test card. but how to enter clone mode ? phone accepts test mode by holding # for 3 seconds. but the phone does not ask for a pin code and i cannot put it on !?!

so how to remove simlock from old phone ?

thank you ! squesch

fm-gsm · 10-23-2001, 00:57

Hi Your hex work only for test card but not test/clone card. The test/clone card ask pin code: 1111 to enter on clone mode 5555 to enter on test mode I proposed to send me this hex to test it to you [email protected] regards

10-20-2001, 03:38	#1 (permalink)
Squesch Insane Poster Join Date: May 1999 Posts: 95 Member: 109 Status: Offline Thanks Meter: 1	Test/Clone Card on Goldwafer problems. Please help ! I have problems writing the hex file of the motorola clone/test card to a goldwafer 16f84/24c16 card. I have two different files in hex format, but both break down when writing with error message "verify error at adress h000" using IC-Prog and PonyProg. I have JDM interface which is definitifly ok, because of it writes other files without any errors. after writing card is absolutly empty. card is ok. what is the problem ? how to solve it ? thank you very much ! bye Squesch [email protected]

10-20-2001, 16:15	#3 (permalink)
fm-gsm Freak Poster Join Date: Jul 2001 Location: :-) Posts: 396 Member: 5376 Status: Offline Thanks Meter: 1	Hi<br />All hex files in the web are old. it works only whith the old motorola (before septembre 1998).<br />you can't read the card because the hex file use the CP active (Code Protect)<br />Send me this files i will test it<br />[email protected]<br />regards

10-20-2001, 20:20	#5 (permalink)
Squesch Insane Poster Join Date: May 1999 Posts: 95 Member: 109 Status: Offline Thanks Meter: 1	thanks ! i now have a working test card. but how to enter clone mode ? phone accepts test mode by holding # for 3 seconds. but the phone does not ask for a pin code and i cannot put it on !?! so how to remove simlock from old phone ? thank you !<br />squesch

10-23-2001, 00:57	#6 (permalink)
fm-gsm Freak Poster Join Date: Jul 2001 Location: :-) Posts: 396 Member: 5376 Status: Offline Thanks Meter: 1	Hi<br />Your hex work only for test card but not test/clone card.<br />The test/clone card ask pin code:<br />1111 to enter on clone mode<br />5555 to enter on test mode<br />I proposed to send me this hex to test it to you<br />[email protected]<br />regards

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Test-Clone card file ??	Kilowat	Motorola Old Legacy (EMMI)	5	09-24-2001 21:43
MOTOROLA TEST/CLONE CARD FOR 15USD	asas	Motorola Old Legacy (EMMI)	0	08-20-2001 17:31
TEST/CLONE CARD for 15USD	asas	Motorola Old Legacy (EMMI)	0	07-26-2001 20:07
Test/Clone Card	ALieN_CHeMiST	Motorola Old Legacy (EMMI)	0	04-06-2000 15:39
Test/Clone card, emulating...	Liquid	Motorola Old Legacy (EMMI)	2	03-29-2000 23:50

10-20-2001, 03:40	#2 (permalink)
Squesch Insane Poster Join Date: May 1999 Posts: 95 Member: 109 Status: Offline Thanks Meter: 1	forgot to tell that i already have tested ludipipo with same misaccess. Squesch

10-20-2001, 18:13	#4 (permalink)
NUGSM No Life Poster Join Date: Apr 2001 Location: UK Age: 48 Posts: 661 Member: 4217 Status: Offline Thanks Meter: 28	Make sure all the fuses are not checked when you write the hex, i had the exact problem unchecked the fuses and it all worked fine