A920 Issues - GSM-Forum

fuji_man · 10-27-2006, 02:50

I have 2 issues with 2 different A920 any help will be great

1st phone won't charge and cam don't work so I have to change battery often, however is there suppose to have some backup battery in there so the time don't reset? If there is where it is so I could replace it.

2nd phone is stuck in "Paragon Test Command" upon turning on the phone. It shows a blue screen titled of paragon test command (Detail of this screen is followed). On the web and the closest thing to it is waiting for re-emumering problem, however this is not on my screen.

Under Radiocomm phone will respond to GET IMEI or other command.
Under PST 7 or rsd lite 3, program say switching phone to flash mode & then will stop

When I try to load Bootloader (A+B+battery), I get only a black screen on the phone, xp detect the phone as flash object, but flashing will get an error about no compatible with super-file.

If I don't use bootloader mode, xp will give me 3 device (1 of them is MUD something)

my IC board model # is 8487835M01

Please someone help or at least give me some tip on this

The deatil of what is on my phone screen is the following:

Paragon Test Command
Dectected USB cable
Paragon Test Command
TCMD Phase4.9.3 Release
005964
100001
c22389_paragon06
2003-02-07 14:06:11
mot_paragon_803_03
Initializing
Waiting 5sec...
initializing C32
loading PDD0 for UART1
loading LDD
connecting to C32server
loading EUSBC.LDD
opening Mux ch7
Checking IPC...
running BP[0fff]...
H->B[8]bytes
8000 6fff 0000 0000
done.
connecting to USBMAN
loading MUSBCTCMD.CSY
starting USBMAN
opening USB port
Ready

10-27-2006, 02:50	#1 (permalink)
fuji_man Junior Member Join Date: May 2006 Posts: 19 Member: 283557 Status: Offline Thanks Meter: 0	A920 Issues I have 2 issues with 2 different A920 any help will be great 1st phone won't charge and cam don't work so I have to change battery often, however is there suppose to have some backup battery in there so the time don't reset? If there is where it is so I could replace it. 2nd phone is stuck in "Paragon Test Command" upon turning on the phone. It shows a blue screen titled of paragon test command (Detail of this screen is followed). On the web and the closest thing to it is waiting for re-emumering problem, however this is not on my screen. Under Radiocomm phone will respond to GET IMEI or other command. Under PST 7 or rsd lite 3, program say switching phone to flash mode & then will stop When I try to load Bootloader (A+B+battery), I get only a black screen on the phone, xp detect the phone as flash object, but flashing will get an error about no compatible with super-file. If I don't use bootloader mode, xp will give me 3 device (1 of them is MUD something) my IC board model # is 8487835M01 Please someone help or at least give me some tip on this The deatil of what is on my phone screen is the following: Paragon Test Command Dectected USB cable Paragon Test Command TCMD Phase4.9.3 Release 005964 100001 c22389_paragon06 2003-02-07 14:06:11 mot_paragon_803_03 Initializing Waiting 5sec... initializing C32 loading PDD0 for UART1 loading LDD connecting to C32server loading EUSBC.LDD opening Mux ch7 Checking IPC... running BP[0fff]... H->B[8]bytes 8000 6fff 0000 0000 done. connecting to USBMAN loading MUSBCTCMD.CSY starting USBMAN opening USB port Ready

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CID51 issue or server issue	fonegeeks	Seking Server	1	04-15-2009 15:59
MOTOROLA A920 how to enter subsidy code.	DrMobile	Motorola P2k	22	03-12-2004 21:48
motorola a920 unlock code	t100	Phone Unlocking Codes & Maps	0	11-03-2003 17:19
motorola a920	waza272003	Motorola P2k	0	10-08-2003 16:21
installing P800 application into A920	dingo101	Motorola P2k	2	10-03-2003 03:40