E1000 won't flash - GSM-Forum

haddar · 12-27-2014, 17:44

Hi all,

I have been digging in my old stock of gsm that i hove owned years ago and i fell on a Moto E1000 that i really loved by that time cuz of its stereo speakers and relatively large and colorful screen. Long story short, i had flashed the phone previously and brick it because if i can remember, i interrupted a flush process. Now the phone can't boot in any mode but test point. the test point brings the Flash interface up to the surface but no tool can deal with it!! can't flash using P2K tools, P2k easy tools, RSD lite and Flash&backup.

*RSD lite says the firmware is not compatible with the handset
*P2k Easy tools can connect but says it can't read and so do the others.

I saw somewhere that it needs a PDS repair but how?

All resources on the net are obsolete or inaccessible anymore! i barely could find a shx flash file

Any help to bring up the dead to life?
Thanks a lot for any help

haddar · 12-28-2014, 10:07

A miracle! i got it back to life! but with a half display :/ i think the screen is dead. i will try to rehot the driver area and see what happens

haddar · 12-28-2014, 15:21

This is AWESOME!! the phone is 100% alive now! i have been through a lot of steps.
1st : since i couldn't see what the phone is doing because of the display that i thought broken, i tried to make an unlock with Easy tool 3.9 (5.3 couldn't do it) which wrote a new bootloader (631 i think) and rebooted the phone and than SURPRISE

the screen is working perfect with all the backlights (side buttons and keyboard)
2nd the phone was asking for subsidy code thing that i thought a simple user access code and not unlock code. i kept tried 0000, 1234 ... until i got it saying Contact Operator. Damn, i am stuck (i was telling myself) and then i reopened P2K easy tool 3.9 and made the same operation again to unlock and guess what?? ERROR bla bla bla and then i got a 0x1DE error on the screen. ****! i brick it again!!
3rd. wanna know how i did to get it up again?? drop a reply

12-27-2014, 17:44	#1 (permalink)
haddar Freak Poster Join Date: Jan 2004 Posts: 263 Member: 48755 Status: Offline Thanks Meter: 30	E1000 won't flash Hi all, I have been digging in my old stock of gsm that i hove owned years ago and i fell on a Moto E1000 that i really loved by that time cuz of its stereo speakers and relatively large and colorful screen. Long story short, i had flashed the phone previously and brick it because if i can remember, i interrupted a flush process. Now the phone can't boot in any mode but test point. the test point brings the Flash interface up to the surface but no tool can deal with it!! can't flash using P2K tools, P2k easy tools, RSD lite and Flash&backup. RSD lite says the firmware is not compatible with the handset P2k Easy tools can connect but says it can't read and so do the others. I saw somewhere that it needs a PDS repair but how? All resources on the net are obsolete or inaccessible anymore! i barely could find a shx flash file Any help to bring up the dead to life? Thanks a lot for any help

12-28-2014, 10:07	#2 (permalink)
haddar Freak Poster Join Date: Jan 2004 Posts: 263 Member: 48755 Status: Offline Thanks Meter: 30	A miracle! i got it back to life! but with a half display :/ i think the screen is dead. i will try to rehot the driver area and see what happens

12-28-2014, 15:21	#3 (permalink)
haddar Freak Poster Join Date: Jan 2004 Posts: 263 Member: 48755 Status: Offline Thanks Meter: 30	This is AWESOME!! the phone is 100% alive now! i have been through a lot of steps. 1st : since i couldn't see what the phone is doing because of the display that i thought broken, i tried to make an unlock with Easy tool 3.9 (5.3 couldn't do it) which wrote a new bootloader (631 i think) and rebooted the phone and than SURPRISE the screen is working perfect with all the backlights (side buttons and keyboard) 2nd the phone was asking for subsidy code thing that i thought a simple user access code and not unlock code. i kept tried 0000, 1234 ... until i got it saying Contact Operator. Damn, i am stuck (i was telling myself) and then i reopened P2K easy tool 3.9 and made the same operation again to unlock and guess what?? ERROR bla bla bla and then i got a 0x1DE error on the screen. ****! i brick it again!! 3rd. wanna know how i did to get it up again?? drop a reply