easy tp by your self v3 - GSM-Forum

skkeptik2 · 01-19-2007, 19:25

use some old used flat cable for v3/v3x/v3i, cut part with connector solder wire to pin 15 on connector , other wire to gnd on flat, put between wires some switch...... and voila is easy tp adapter for all v3 motorolas, no give 10e for nothing

skk!

paullovinicius · 01-19-2007, 20:12

please, post a pic :-)

skkeptik2 · 01-19-2007, 20:15

picture you can see atached in main sales section.....on some advertising
post

skk

fgl30 · 01-19-2007, 20:41

Do you think is really interesting loosing time to make this? Comn man.... is just 10 euros that saves time in soldering.......

OvidelGSM · 01-19-2007, 20:46

10 euros are much

paullovinicius · 01-19-2007, 22:42

Quote:

Originally Posted by skkeptik2

picture you can see atached in main sales section.....on some advertising post

i'm talking about pics for a home made "v3 tp adapter" not that for sales...
i need help to see connector pinout

MotoCat · 01-20-2007, 04:32

Quote:

Originally Posted by skkeptik2

solder wire to pin 15 on connector , other wire to gnd on flat, put between wires some switch...... and voila is easy tp adapter for all v3 motorolas, no give 10e for nothing

skk!

Sounds interesting, which connector is that? Do you have a photo? Thanks!

Raskal · 01-20-2007, 05:54

Quote:

Originally Posted by paullovinicius

please, post a pic :-)

He can not post picture because he must destroy flat cable from V3 and the phone cost more than 10 euro in case he not have a damaged flat cable on hand....

and second problem is, flex cable is not been desgined to be used by always pulling at the solder points, this will break fast, flex cable is designed to be flexible at the middle but not at the end...

this ideea here is more realible, since it is very robust and can be used many times.

http://www.odeon.cn/UBLTP.jpg

B.R.,
Raskal

skkeptik2 · 01-20-2007, 06:24

any service point has minimum 50=pcs of ****ed flat cables,replaced with new ones,.... so Raki,where is problem

PS,sorry for advertise , but UBL works like rocket , tnx for that Raskal

Afzaal · 01-20-2007, 08:05

Interesting....................

djmaniack · 01-20-2007, 08:22

Please confirm that pin 15 is corect.

eivoig · 01-20-2007, 08:24

I made my on testpoint adaptor and it is very easy and tested by me!

Picture 1

mroa · 01-20-2007, 11:35

yes pin 15 is corect and for k1 is pin 8

take a look for this schem http://www.bestgsm.pl/img/v3_easy_te...nt_by_mroa.jpg

and it tested

BR

Afzaal · 01-20-2007, 11:50

Quote:

Originally Posted by mroa

yes pin 15 is corect and for k1 is pin 8

take a look for this schem http://www.bestgsm.pl/img/v3_easy_te...nt_by_mroa.jpg

and it tested

BR

Which one is Correct GSM PL or GSMturk.

GSM.PL
http://i106.photobucket.com/albums/m...nt_by_mroa.jpg

GSMturk

http://i106.photobucket.com/albums/m...SMTURKTEAM.jpg

Pins are totally Diffrent from one and other.
if u invert GSMturk Pic PIN-1 will go to Top Left and due to GSM.PL top left is Pin 25.
So what do u guys think now.

BR.

mroa · 01-20-2007, 12:01

man it's sam but on my picture You can see side from top

01-19-2007, 19:25	#1 (permalink)
skkeptik2 Freak Poster Join Date: Apr 2004 Age: 38 Posts: 201 Member: 63120 Status: Offline Thanks: 10 Thanked 47 Times in 26 Posts	easy tp by your self v3 use some old used flat cable for v3/v3x/v3i, cut part with connector solder wire to pin 15 on connector , other wire to gnd on flat, put between wires some switch...... and voila is easy tp adapter for all v3 motorolas, no give 10e for nothing skk!

01-19-2007, 20:15	#3 (permalink)
skkeptik2 Freak Poster Join Date: Apr 2004 Age: 38 Posts: 201 Member: 63120 Status: Offline Thanks: 10 Thanked 47 Times in 26 Posts	picture picture you can see atached in main sales section.....on some advertising post skk

01-20-2007, 08:05	#10 (permalink)
Afzaal No Life Poster Join Date: Mar 2005 Location: lets See. Posts: 3,459 Member: 128918 Status: Offline Thanks: 47 Thanked 303 Times in 139 Posts	Interesting.................... Last edited by Afzaal; 01-20-2007 at 11:42.

01-20-2007, 08:24	#12 (permalink)
eivoig No Life Poster Join Date: Jul 2001 Location: Spinning on my OWN Orbit Posts: 983 Member: 5358 Status: Offline Thanks: 56 Thanked 212 Times in 68 Posts	I made my on testpoint adaptor and it is very easy and tested by me! Picture 1 Last edited by eivoig; 01-20-2007 at 08:26. Reason: made your own testpoint adaptor using damage flex of V3

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-19-2007, 20:12	#2 (permalink)
paullovinicius No Life Poster Join Date: Jul 2005 Age: 26 Posts: 751 Member: 164786 Status: Offline Thanks: 83 Thanked 56 Times in 35 Posts	please, post a pic :-)

01-19-2007, 20:41	#4 (permalink)
fgl30 No Life Poster Join Date: May 2003 Posts: 1,362 Member: 27881 Status: Offline Thanks: 0 Thanked 10 Times in 4 Posts	Do you think is really interesting loosing time to make this? Comn man.... is just 10 euros that saves time in soldering.......

01-19-2007, 20:46	#5 (permalink)
OvidelGSM No Life Poster Join Date: Jan 2005 Location: www.servicegsm.org Posts: 1,440 Member: 103544 Status: Offline Sonork: 100.75677 Thanks: 16 Thanked 156 Times in 72 Posts	10 euros are much

01-20-2007, 06:24	#9 (permalink)
skkeptik2 Freak Poster Join Date: Apr 2004 Age: 38 Posts: 201 Member: 63120 Status: Offline Thanks: 10 Thanked 47 Times in 26 Posts	any service point has minimum 50=pcs of ****ed flat cables,replaced with new ones,.... so Raki,where is problem PS,sorry for advertise , but UBL works like rocket , tnx for that Raskal

01-20-2007, 08:22	#11 (permalink)
djmaniack Freak Poster Join Date: Dec 2004 Age: 31 Posts: 164 Member: 101262 Status: Offline Thanks: 2 Thanked 8 Times in 6 Posts	Please confirm that pin 15 is corect.

01-20-2007, 11:35	#13 (permalink)
mroa Freak Poster Join Date: Dec 2002 Age: 31 Posts: 400 Member: 18791 Status: Offline Sonork: 100.1577421 Thanks: 7 Thanked 70 Times in 29 Posts	yes pin 15 is corect and for k1 is pin 8 take a look for this schem http://www.bestgsm.pl/img/v3_easy_te...nt_by_mroa.jpg and it tested BR

01-20-2007, 12:01	#15 (permalink)
mroa Freak Poster Join Date: Dec 2002 Age: 31 Posts: 400 Member: 18791 Status: Offline Sonork: 100.1577421 Thanks: 7 Thanked 70 Times in 29 Posts	man it's sam but on my picture You can see side from top

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Build by your self BB5 SP unlock Box	Dejan Kaljevic	Nokia Base Band 5 ( BB-5 )	613	05-14-2008 10:13
>>Why sticky this thread "Build by your self BB5 SP unlock Box" ?<<	snsoftkiller	Nokia Base Band 5 ( BB-5 )	4	06-16-2007 02:26
Update Your Nokia Phone By Your Self.	braindead_05	Nokia Digital Core Technology 4 ( DCT-4 )	3	03-12-2007 16:51
what can downloading free today chick by your self	fonec	UFS2 + UFS3-Tornadoflasher	15	11-04-2004 20:04