F.A.Q About P2K Series. - GSM-Forum

***stanner_austin*** · 09-16-2007, 14:29

Here Is Little Info About P2K ..

May Be This Can Help All Users..

1 P2k How To Connect Phone With Pc.?
A. Use P2k Driver To Detect Phone At Modem .Like Here Software Is Auto install So Just Tick On "Clean And Reinstall " Press Start It Install All. Here Is Link For P2k Driver Only Without Auto Install.
B. After Installing Modem You Have To Switch Phone To P2k Mode To Accept All Another Drivers Which Need For Read And Repair .Use Rsd Lite To Do That.. Link Is Here

2 What Is Reason We Have To Install Driver?
A. Motorola All Command And Loader Base On Factory Info.So They Using P2k Mode And Flash Mode To Access, Modification And Any Changing If We Need.
B. Without Driver We Can't See Phone So Must Install Before Do Anything.. And Open Rsd Lite To Let Him Complete Installation.

3 What Is Reason We Need Rsd Lite?
A. There Is Many Rezone .[1] To Install Complete Driver.[2] To Flash Firmware To Phone [3] Flash Fex File To Phone.

4 What Is Flash Mode?
A. Flash Mode Is Most Important Thing We Need To Flash Phone And Repair Phone. By Pressing {*+#+Power Button} You See Black Screen Which Come Because Of Flash Mode. With Much Info That What In Phone..

5 What Is P2k Mode?
A. P2k Mode Is Need To Send Phone Commands Receiving Data..
B. Modified Flex Area.
C. Modified User Area Like User Code Security Code.

6 At Flash Mode In Phone I Can See Many Info. What Are They?
A. Most Important Info. Boot loader Xx ***x
B. Software Version Info.
C. Interface Which Is Connected.

7 What Is Boot Loader?
A. Boot loader Is = Flash Mode.. Without Boot Loader Your Phone Go To Special Blank Mode.

8 What Is Software Version?
A. Software Version Which Ur Phone Have. You Must Flash Same Version Or Newer Then It Firmware Or Monster Flash File To Phone Only..

9 What Is Blank Mode?
A. Blank Mode Is Special Mode To Use Unlocking Changing Pds And If We Losted Boot loader Then Its Come..

10 How To We Know That Phone Is In Blank Mode?
A. Just Plug Cable To Phone And Pc Your Phone Detect As S Blank ****** Means Your Phone Have No Valid Boot loader. So Its In Blank. You Can Call Him Dead Phone Right Now..

11 What Is LTE And LTE2 Prog And Aragon?
A. Its Are Cpu That Phone Use.

12 What Is PDS?
A. Pds Contact So Much Info About Phone Security .
B. Pds Have Lock Data
C. Pds Have Calculated Security Of Phone.
D. Pds Can Be Rewrites Or Recalculated Via Only Tp. Or Blank Mode With Special Method.

13 What Is Reason At Phone Flash Mode We See Code Corrupted?
A. Firmware Damaged So First Reflash It
B. Pds And Firmware Code Not Matched Do Pds Repair And Reflash It.

14 What Is Reason We See Mem Blank At Phone Flash Mode?
A. Firmware Area Damaged Reflash Will Fix It.
B. Boot Area Damaged Install Boot Will Fix It.
C. Pds Area Damaged Recalculate Or Rewrite Pds Then Flash Will Fix It.

15 What Is Reason We See Some Time Lcd Problem?
A. Flex Area Have Special Part For Lcd Setting Rf Value You Need To Rewrite It.

16 How To Flash Phone With Rsd Lite?
A. Simple Just Connect Phone At Flash Mode [*+#+Power Button]
And Select Active Ur Model & Select Correct Flash File And Press Start ..

17 How To Check Software Version And Boot loader If Phone Lcd Damage Or Blank ?
A. Just Use Simple Flash Mode [*+#+Power Button] And Open Rsd Lite To See Phone Info. For More Details Just See Image.

18 Why Some Phone Start At Flash Mode Only?
A. Firmware Damaged Reflashing Full Flash May Solve
B. Pds Damaged Recalculate Or Rewrite Then Full Flash Need To Resolve Problem

19 What Is Image Flash? (RFDI)
A. It Is Repair File For Repair Boot And Pds For Blank Phones Only. If U Have Phone Which Is Detect In Blank Mode Only. Use RFDI Image To Restore/Repair Pds And Boot Area. After Flashing RFDI File You Must Flash Monster Flash Or Reflash To Phone.

20 What Is Monster Flash And Reflash?
A. Reflash Come With Only Firmware And Drm Area.
B. Monster Flash Come With Firmware, Flex, Pds Info, Drm, Lang, Mostly Everything.

21 What Is Reason Software Not Found Phone Start At Flash Mode Only?
A. Phone Firmware Damaged Reflash Monster Flash Only. To Check
B. Pds Corrupted Rewrite Or Recalculate Then Full Flash May Solve It.
C. Still Same Just Problem With Version In Case You Must Erase Phone Flash Then Do Image Flash To Restore Boot are Then Pds Repair To Check You Get Firmware Version Ok Or Not. If Ok Some Time Need To Reflash Latest Version To Let It Working Perfect .If No Then Have Bad Hardware At Phone.

22 How To See Which Firmware I Have Is Older Then Phone Have? In Easy How To Recognize Motorola Model Version?
A. For Example We Have Phone L7 SW Version R4513_G_08.B7.86R So We Have
R4513_G_08 Is Model Factory Permanent Version Which Should Not Be Change When You Flash Any New Version So Be Sure Your Firmware Start With This.
B7.86R = Is Our Firmware Version If We Have This At Phone We Should Use This One Or Newer Then This To Repair Phone Without It We Will Have Only Flash Mode Or Keypad Led Work Once And Phone Off.

NEWEST AUTO INSTALL DRIVERHERE

IMODE DRIVER ONLY FOR IMODE BASE MOTOROLA
HERE
Just Wait For Unlocking Info Soon I Post Every Tested Phone Method To Unlock And Repair Free.

HOPE THIS CAN HELP ALL..

note : i will update this thread day by day..

BEST REGARDS
Gopal Chevli.

.:ELSHORBAGY:. · 09-16-2007, 14:49

Great iformation and hope all member use this method it's easy ..... Good explain , But here there is comment about A835 3G this phone Dead , And when i plug USB Data Cable it tell me New hardware and Just updated driver sucessfully , but problem Phone is hidden No Hardware added in file Manager .... Also Big Problem there is no any TP For this phone till now ... Any one faced this problem ??

B.R

***stanner_austin*** · 09-16-2007, 14:53

@elshorbagy

Quote:

New hardware and Just updated driver sucessfully

your phone go to Unknowed device..
u can see at universal serial bus

check connector or Ic for it.. better check phone hardware.
must detect then u can do anything at software part..

krisleslie · 10-13-2007, 00:21

I have a Cingular Razr V3 (R374)
BootLoader: 08.29
SW Version: R374_G_0E.42.15R

I can get to bootloader only. I deleted the MOTO skin accidentally ( didn't know it needed to stay ) and now all I get is the white screen after boot. I need help and I do have most of the common P2K tools and RSD tools so any assitance will be helpful.

I do have a backup of the (A) Drive and the phone book but I don't have a full back up. I don't mind getting a bone stock cingular flash or whatever you want to call it but I need it back and running ASAP.

Any help appreciated (with steps please)

***stanner_austin*** · 10-13-2007, 09:07

@krisleslie

welcome to gsmhosting.

if you see Rsd lite its just flasher tool for all Motorola phones.
and if you see P2K section you see SHX AND SBF file thread you can search there first for your version. if no found then you can request there you get file from there.

connect phone in flash mode. see up what is flash mode.at post 1
select file in Rsd lite you get it from here.
and press start.
wait little till finish.
after finish phone will restarted in normal mode and you can see at phone LCD.

you get working phone.

chiflex.com · 10-18-2007, 13:05

good work man keep it up.................

chackmate_jaan · 10-18-2007, 13:27

Sir, stanner_austin
One Problem With Me in Motorolla A1000 Handset after Flash With Victor Headset work properly without SIM Card.
But When Insert SIM Card & Calling then SET is Hang.
If any Solution of this Problem .......!
Plz Give Me Advice
thank in Advcane

Communication · 10-21-2007, 09:41

Stanner_Austin, Could you please help.

tried to use P2k to unlock C370, C333 and gets this error:

Connecting to phone ...
Switching to P2K mode ...
Connected to: 'Motorola Test Interface'
Switching to flash mode ...
Connected to: 'Motorola Flash'
Connected OK
Sending loader to phone ...
ERROR: Receiving 0x41 ACK
ERROR: Send loader failed

And then I tried to unlock my V66 T-Mobile phone and the software does not do anything its completely different from the C370.

HELP!! any assistance would be greatly appreciated.

***stanner_austin*** · 10-22-2007, 10:08

@Communication

welcome to gsmhosting.

you have to use box and tools.
you can't do with free tools

Raulperez53 · 10-29-2007, 15:00

what is DRM ?? now in Scout section flashes have DRM ? this is for repair ? like pds ?

systemworm · 10-29-2007, 22:25

Quote:

Originally Posted by Raulperez53

what is DRM ?? now in Scout section flashes have DRM ? this is for repair ? like pds ?

DRM is graphical interface I think

hcomp · 10-30-2007, 18:38

thanks for your post
but sorry this driver not work with L6-i Mode and L7-i Mode

can you hellp please

***stanner_austin*** · 10-30-2007, 18:46

Quote:

Originally Posted by hcomp

thanks for your post
but sorry this driver not work with L6-i Mode and L7-i Mode

can you hellp please

ok added to first post
here is link
http://www.gsmchevli.com/support/iModedrivers.rar

hcomp · 10-30-2007, 20:26

Quote:

Originally Posted by stanner_austin

ok added to first post
here is link
http://www.gsmchevli.com/support/iModedrivers.rar

very thanks for you and goood support

hesham

dingski · 11-19-2007, 02:31

nice info sir..keep up the unselfish good work..thanks..

09-16-2007, 14:29	#1 (permalink)
*stanner_austin* Super Moderator Join Date: Jan 2004 Location: INDIA,Gujarat,Surat Age: 28 Posts: 5,075 Member: 49752 Status: Offline Sonork: 100.112446 Thanks: 105 Thanked 4,017 Times in 603 Posts	F.A.Q About P2K Series. Here Is Little Info About P2K .. May Be This Can Help All Users.. 1 P2k How To Connect Phone With Pc.? A. Use P2k Driver To Detect Phone At Modem .Like Here Software Is Auto install So Just Tick On "Clean And Reinstall " Press Start It Install All. Here Is Link For P2k Driver Only Without Auto Install. B. After Installing Modem You Have To Switch Phone To P2k Mode To Accept All Another Drivers Which Need For Read And Repair .Use Rsd Lite To Do That.. Link Is Here 2 What Is Reason We Have To Install Driver? A. Motorola All Command And Loader Base On Factory Info.So They Using P2k Mode And Flash Mode To Access, Modification And Any Changing If We Need. B. Without Driver We Can't See Phone So Must Install Before Do Anything.. And Open Rsd Lite To Let Him Complete Installation. 3 What Is Reason We Need Rsd Lite? A. There Is Many Rezone .[1] To Install Complete Driver.[2] To Flash Firmware To Phone [3] Flash Fex File To Phone. 4 What Is Flash Mode? A. Flash Mode Is Most Important Thing We Need To Flash Phone And Repair Phone. By Pressing {+#+Power Button} You See Black Screen Which Come Because Of Flash Mode. With Much Info That What In Phone.. 5 What Is P2k Mode? A. P2k Mode Is Need To Send Phone Commands Receiving Data.. B. Modified Flex Area. C. Modified User Area Like User Code Security Code. 6 At Flash Mode In Phone I Can See Many Info. What Are They? A. Most Important Info. Boot loader Xx x B. Software Version Info. C. Interface Which Is Connected. 7 What Is Boot Loader? A. Boot loader Is = Flash Mode.. Without Boot Loader Your Phone Go To Special Blank Mode. 8 What Is Software Version? A. Software Version Which Ur Phone Have. You Must Flash Same Version Or Newer Then It Firmware Or Monster Flash File To Phone Only.. 9 What Is Blank Mode? A. Blank Mode Is Special Mode To Use Unlocking Changing Pds And If We Losted Boot loader Then Its Come.. 10 How To We Know That Phone Is In Blank Mode? A. Just Plug Cable To Phone And Pc Your Phone Detect As S Blank **** Means Your Phone Have No Valid Boot loader. So Its In Blank. You Can Call Him Dead Phone Right Now.. 11 What Is LTE And LTE2 Prog And Aragon? A. Its Are Cpu That Phone Use. 12 What Is PDS? A. Pds Contact So Much Info About Phone Security . B. Pds Have Lock Data C. Pds Have Calculated Security Of Phone. D. Pds Can Be Rewrites Or Recalculated Via Only Tp. Or Blank Mode With Special Method. 13 What Is Reason At Phone Flash Mode We See Code Corrupted? A. Firmware Damaged So First Reflash It B. Pds And Firmware Code Not Matched Do Pds Repair And Reflash It. 14 What Is Reason We See Mem Blank At Phone Flash Mode? A. Firmware Area Damaged Reflash Will Fix It. B. Boot Area Damaged Install Boot Will Fix It. C. Pds Area Damaged Recalculate Or Rewrite Pds Then Flash Will Fix It. 15 What Is Reason We See Some Time Lcd Problem? A. Flex Area Have Special Part For Lcd Setting Rf Value You Need To Rewrite It. 16 How To Flash Phone With Rsd Lite? A. Simple Just Connect Phone At Flash Mode [+#+Power Button] And Select Active Ur Model & Select Correct Flash File And Press Start .. 17 How To Check Software Version And Boot loader If Phone Lcd Damage Or Blank ? A. Just Use Simple Flash Mode [+#+Power Button] And Open Rsd Lite To See Phone Info. For More Details Just See Image. 18 Why Some Phone Start At Flash Mode Only? A. Firmware Damaged Reflashing Full Flash May Solve B. Pds Damaged Recalculate Or Rewrite Then Full Flash Need To Resolve Problem 19 What Is Image Flash? (RFDI) A. It Is Repair File For Repair Boot And Pds For Blank Phones Only. If U Have Phone Which Is Detect In Blank Mode Only. Use RFDI Image To Restore/Repair Pds And Boot Area. After Flashing RFDI File You Must Flash Monster Flash Or Reflash To Phone. 20 What Is Monster Flash And Reflash? A. Reflash Come With Only Firmware And Drm Area. B. Monster Flash Come With Firmware, Flex, Pds Info, Drm, Lang, Mostly Everything. 21 What Is Reason Software Not Found Phone Start At Flash Mode Only? A. Phone Firmware Damaged Reflash Monster Flash Only. To Check B. Pds Corrupted Rewrite Or Recalculate Then Full Flash May Solve It. C. Still Same Just Problem With Version In Case You Must Erase Phone Flash Then Do Image Flash To Restore Boot are Then Pds Repair To Check You Get Firmware Version Ok Or Not. If Ok Some Time Need To Reflash Latest Version To Let It Working Perfect .If No Then Have Bad Hardware At Phone. 22 How To See Which Firmware I Have Is Older Then Phone Have? In Easy How To Recognize Motorola Model Version? A. For Example We Have Phone L7 SW Version R4513_G_08.B7.86R So We Have R4513_G_08 Is Model Factory Permanent Version Which Should Not Be Change When You Flash Any New Version So Be Sure Your Firmware Start With This. B7.86R = Is Our Firmware Version If We Have This At Phone We Should Use This One Or Newer Then This To Repair Phone Without It We Will Have Only Flash Mode Or Keypad Led Work Once And Phone Off. NEWEST AUTO INSTALL DRIVERHERE IMODE DRIVER ONLY FOR IMODE BASE MOTOROLA HERE Just Wait For Unlocking Info Soon I Post Every Tested Phone Method To Unlock And Repair Free. HOPE THIS CAN HELP ALL.. note : i will update this thread day by day.. BEST REGARDS Gopal Chevli. Last edited by stanner_austin; 09-27-2008 at 18:03.

10-13-2007, 00:21	#4 (permalink)
krisleslie Junior Member Join Date: Oct 2007 Posts: 1 Member: 608243 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	Need help I have a Cingular Razr V3 (R374) BootLoader: 08.29 SW Version: R374_G_0E.42.15R I can get to bootloader only. I deleted the MOTO skin accidentally ( didn't know it needed to stay ) and now all I get is the white screen after boot. I need help and I do have most of the common P2K tools and RSD tools so any assitance will be helpful. I do have a backup of the (A) Drive and the phone book but I don't have a full back up. I don't mind getting a bone stock cingular flash or whatever you want to call it but I need it back and running ASAP. Any help appreciated (with steps please)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Flashing Motorola P2k Series	KaBLooMz	P2k Series	93	02-04-2006 11:16
About P2k series???	proxy_gsm	Twisterflasher	11	02-18-2004 10:11
plz help for motorola p2k series driver	GSM MIND	P2k Series	0	07-09-2003 07:31
wanted New P2K series (PATRIOT) clip. (UK)	dluik	Wanted Products	0	02-25-2003 12:55
New P2K series (PATRIOT) clip relased today!	Raskal	Main Sales Section	0	02-20-2003 15:40

09-16-2007, 14:49	#2 (permalink)
.:ELSHORBAGY:. Freak Poster Join Date: Jun 2006 Location: http://GSM-SHORBAGY.ORG Age: 14 Posts: 435 Member: 296690 Status: Offline Thanks: 1 Thanked 14 Times in 11 Posts	Great iformation and hope all member use this method it's easy ..... Good explain , But here there is comment about A835 3G this phone Dead , And when i plug USB Data Cable it tell me New hardware and Just updated driver sucessfully , but problem Phone is hidden No Hardware added in file Manager .... Also Big Problem there is no any TP For this phone till now ... Any one faced this problem ?? B.R

10-13-2007, 09:07	#5 (permalink)
*stanner_austin* Super Moderator Join Date: Jan 2004 Location: INDIA,Gujarat,Surat Age: 28 Posts: 5,075 Member: 49752 Status: Offline Sonork: 100.112446 Thanks: 105 Thanked 4,017 Times in 603 Posts	@krisleslie welcome to gsmhosting. if you see Rsd lite its just flasher tool for all Motorola phones. and if you see P2K section you see SHX AND SBF file thread you can search there first for your version. if no found then you can request there you get file from there. connect phone in flash mode. see up what is flash mode.at post 1 select file in Rsd lite you get it from here. and press start. wait little till finish. after finish phone will restarted in normal mode and you can see at phone LCD. you get working phone.

10-18-2007, 13:05	#6 (permalink)
chiflex.com Freak Poster Join Date: Aug 2006 Posts: 238 Member: 328418 Status: Offline Thanks: 2 Thanked 31 Times in 23 Posts	good work man keep it up.................

10-18-2007, 13:27	#7 (permalink)
chackmate_jaan Junior Member Join Date: Mar 2007 Posts: 39 Member: 476106 Status: Offline Thanks: 9 Thanked 1 Time in 1 Post	Sir, stanner_austin One Problem With Me in Motorolla A1000 Handset after Flash With Victor Headset work properly without SIM Card. But When Insert SIM Card & Calling then SET is Hang. If any Solution of this Problem .......! Plz Give Me Advice thank in Advcane

10-21-2007, 09:41	#8 (permalink)
Communication Junior Member Join Date: Oct 2007 Posts: 3 Member: 613333 Status: Offline Thanks: 0 Thanked 1 Time in 1 Post	Stanner_Austin, Could you please help. tried to use P2k to unlock C370, C333 and gets this error: Connecting to phone ... Switching to P2K mode ... Connected to: 'Motorola Test Interface' Switching to flash mode ... Connected to: 'Motorola Flash' Connected OK Sending loader to phone ... ERROR: Receiving 0x41 ACK ERROR: Send loader failed And then I tried to unlock my V66 T-Mobile phone and the software does not do anything its completely different from the C370. HELP!! any assistance would be greatly appreciated.

10-22-2007, 10:08	#9 (permalink)
*stanner_austin* Super Moderator Join Date: Jan 2004 Location: INDIA,Gujarat,Surat Age: 28 Posts: 5,075 Member: 49752 Status: Offline Sonork: 100.112446 Thanks: 105 Thanked 4,017 Times in 603 Posts	@Communication welcome to gsmhosting. you have to use box and tools. you can't do with free tools

10-29-2007, 15:00	#10 (permalink)
Raulperez53 Freak Poster Join Date: Feb 2007 Posts: 125 Member: 458568 Status: Offline Thanks: 5 Thanked 8 Times in 5 Posts	what is DRM ?? now in Scout section flashes have DRM ? this is for repair ? like pds ?

10-30-2007, 18:38	#12 (permalink)
hcomp Freak Poster Join Date: Jun 2003 Location: egypt Posts: 390 Member: 31136 Status: Offline Thanks: 0 Thanked 97 Times in 20 Posts	thanks for your post but sorry this driver not work with L6-i Mode and L7-i Mode can you hellp please

11-19-2007, 02:31	#15 (permalink)
dingski Major Poster Join Date: Oct 2003 Age: 56 Posts: 48 Member: 42456 Status: Offline Thanks: 2 Thanked 3 Times in 3 Posts	nice info sir..keep up the unselfish good work..thanks..