|
|
|
| |||||||
| P2k Series A-Series: A630,A668,A728,A732,A768i,A780,A835,A840,A920,A925,A1000,A1200 C-Series: C250,C26x,C33x,C35x,C370,C380,C450,C550,C650,C390,C975,C980 E-Series: E1,E398,E390,E375,E370,E378i,E380,E680,E770,E1000,E680i,E1070 P-Series: P280 T-Series: T280,T720,T721i,T722i V-Series: V60,V66,V7x,V80,V150,V180,V186,V188,V220,V226,V235, V30x,V360,V400,V500,V525,V535,V547,V555,V557,V635,V600,V620,V872, V3,V3x, V3i,V980,V975,V1050. other-Series: like L6,L7,U6. |
 |
| | LinkBack | Thread Tools | Display Modes |
07-29-2003, 07:30
| #1 (permalink) |
| Freak Poster   Join Date: Jun 2003 Location: An italian in Germany :) Age: 29
Posts: 272
Member: 32448 Status: Offline Thanks: 0
Thanked 0 Times in 0 Posts
|  I will go crazy!!!
Hi, I bhought a serial cable because I thought that I couldn't repair my V66 with an usb one but my phone can't still be repaired. I opened the connector of my cable, I tooke away the bridge between pin 1 and 13 and I soldered it to pin 14. But the phone can't still be found and doesn't switch in flash mode. So I tried to solder these 2 pins on my USB cable and still nothing to do. I know that can be an Hardware problem of my phone but if the cable was shorted in the right way also my working T722i had to switch in fash mode when I connect it with the 13-14 pin shorted cable. This doesn't happen, when I connect my working T722i everything works normally. Maybe I shorted the wrong pins. The pins 13 and 14 are the 4th and 5th pins counting from the right side. Or am I wrong? Must I do something else after soldering them? Plz help me I'm really going crazy!!!  |
      |
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
| |
Linear Mode
