K1 unlock needed

[lucky_gsm]

Hello all;
Is it possible to unlock K1 without box?

[unsen2x]

no, you need Smart moto with S-card.

[AlfskieCoder]

No,not Possible to unlock With out box,,MSS box or Smart cLip with S-card can give solution

[lucky_gsm]

Thanx for information

[layna]

of course is possible to unlock k1 without box


just search for mstool free and tespoint ,is easy to do

[Black_Attack]

Yes you can..

You will need: -
MS Tool
K1/Z3 boot core( search in forum)

Here are the quick steps for this tutorial.

1. Open up MS tool and select your phone profile (K1 or Z3.
2. Connect phone in bootloader mode usiung the *+# + power on method
3. Select "Read backup" and choose PDS
*Note if your phone gets a critical error message here please do not use the rest of this tutorial.

If the backup was done without any error this means that the phone is compatible with the tutorial as mstool can read data from the RAMDLD and can write the bootloader and read the PDS!

Now only proceed if everything is okay: battery fully charged without sim card and memory card.


4. Conect phone in bootloader mode "*" + "#" + "power";
5. Open mstool and click in "Write Backup"
6. Select the file "K1__BOOTCORE_TP.bkp" for K1 or "Z3__BOOTCORE_TP.bkp" for Z3;
7. OK. After your phone shuts down automatically, remove the battery and replace the battery. The phone will be recognized by the PC. To see if everything is okay, open RSDLite and make sure it detected "S BLANK NEPTUNE LTE2"... If it is, everything is ok! The phone screen is black! This is OK.
8. Now open mstool and click "unlock". Wait for the phone being disconnected, remove the battery and replace the battery again;
9. In mstool click "Write Backup";
10. Select bootloader 0A.B2 for k1 and 0A.C0 for Z3

[layna]

no men ,that's too much work


only need to do tespoint for unlock with free mstool


tested