Unlock Motorola razr maxx v6
 

Woh to unlock Motorola razr maxx v6?

no solution yet

BR

hurry with a solution

I paid £7 to get that unlock from Ebay. Then how they are unlocking it and even remotely???? He given me code and it worked. :)

Why you don't try flash full with flash file unlock band?????

so for, nobody has this flash file.

can you share it with us?

when your phone have simlok and you flash him with unlocked *******file that change nothing

you need flex unlock for v6

share it with us here...

ALL moto any network any country via iMEI contact me in PM....
Its only solution for now

Is Australian V6 MAxx locked. Cause it doesn't ask for lock code. it just say "insert simcard".

Any one who can help me unlock motorola razr v6

1. Connect powered ON handset to PC via Smart-Clip (phone > USB cable > Smart-Clip > LPT cable > PC).
2. Connect S-Card to PC USB port.
3. Connect power supply to Smart-Clip and power on the handset.
4. Launch SmartMoto.
5. Choose "Smart-Clip USB port" in phone connection window.
6. Press "Search". The software should perform the following steps:

* SmartMoto detects S-Card;
* SmartMoto detects Smart-Clip;
* SmartMoto detects the handset and reads all phone information.

7. Log to bookmark "Prepare"
8. Select an appropriate model from the list.
9. Mark "Unlock automatically" and press "Prepare Smart TestPoint" button.
10. Prepare operation is in progress. The handset gets reloaded, backup of firmware is saved.
11. SmartMoto pops up the message requiring Smart TestPoint cable to be connected. Please perform the following:

* Disconnect the handset and dismantle it
* Please ensure that LCD is disconnected from the board!!!
* Connect Smart TestPoint cable to the port RJ45 on Smart-Clip
* Connect data cable to the phone
* Connect battery hook to the positive (+) battery contact on PCB
* Connect needle A to the primary TestPoint A, hold it until the software informs that it can be disconnected and press OK in SmartMoto.
* The handset should be detected with boot version 0.00.

12. Unlock procedure continues.
13. Disconnect TP needle when SmartMoto informs to do so.
14. If the option "Unlock automatically" was marked – the handset becomes unlocked. If the option was not selected then the handset can be served for Flash, Repair PDS, Unlock or Backup purposes.


Smart TestPoint v2.0 cable schematic

The Smart TestPoint v2.0 cable contains two TestPoint needles and a Battery Hook:

* Yellow - TestPoint A (Primary)
* Black - TestPoint B (Secondary)
* Red - Battery Hook

Please follow this order strictly. Do not use power from the battery. Use battery hook and ensure that it’s connected to the appropriate ("+" Positive) contact.

Procedure came from Andre

GudLuck...

It's possible to unlock your mobile using the unlocking code..I found the site http://www.***********.com/unlock-your-phone/rs6wp2/ .This site provides the unlocking service for your Motorola mobile.U can use this site for unlocking..