V3 dead with SmartMoto Please help URGENT!?!?!?!? - GSM-Forum

deepgsm · 06-28-2005, 10:39

I have motorola V3 and flashing with SmartMoto, flash going cool but when i put security area my telefon is dead. When I pres power blinking and not going is flash mode, in the usb port ist same blinking and says usb not rekognized.
Do you have solution for for this, because usb cabel for this model is small is not same with V300. For V300 solution is 13 and 14 conector is conected and telefon going to flash mod, but for V3 I don't have any idea for flash mod.
THANKS
sorry for my bad english

deepgsm · 06-29-2005, 10:39

must be solution for this????????????????

gsmuy · 06-29-2005, 17:10

first,
did u backuped full flash first with smartmoto??
if u did so, u can restore full flash and phone will be OK.

if not, try to download full flash from smartmoto or for pst, put phone into bootloader mode (press power + * + #)

post results

deepgsm · 06-30-2005, 11:15

My telephone not going in bootloader mode, when press power only blinking, must be solution for this for the cabel solution with testpoints

OvidelGSM · 06-30-2005, 12:23

me too ... i have one .... but someone sad me that his boot is killed and i have no choise ....... THE PHONE IS PERMANENTLY DEAD

deepgsm · 07-01-2005, 11:02

Must be solution with cabel, test points or someyhing else

graca · 07-02-2005, 20:34

WARNING!!! V3 - 96R IS NOT DOWNGRADABLE!!!
victor best!!!!!!!!!!!!!!!
makedonac javi se

OvidelGSM · 07-04-2005, 11:59

how about unlocking motorola V3 version R374_G_0E.40.3ER_A ???? witch software to use ???

deepgsm · 07-04-2005, 13:27

probao sam i sa viktor boxom ali nece da ide ni flash ni flex, kad ga stavis na usb port i kad ga palis on kaze "unlnown usb" ili "usb not rekognized", a telefon celo vreme sam se pali i gasi takozvano trepka. Neznam kako da ga stavim u but mod. Mora da se napravi neki kratak spoj u kabelu isto kako sta ima V300 13i14 se spajaju.
Ako mozez da mi das semu za kabel.
HVALA

OvidelGSM · 07-04-2005, 13:32

i dont understand your language .... and only english is allowed here !!!!

YamahaR1 · 07-05-2005, 19:36

All Moto phones with the mini usb connector will be dead forever if something goes wrong during unlock or flash. There is no way of getting the phone into flash mode because of the usb interface.

vientangsm · 07-05-2005, 19:57

Try this for going flashmode:your must using power supply,first off power supply-> press *,# ->on power supply, your try this many time i hope the phone go to flash mode

YamahaR1 · 07-05-2005, 20:04

HeHeHe. Dead for ever. I hate these Moto ****.

deepgsm · 07-06-2005, 11:43

This is big problem, small usb have 6 connectors maybe somebody have solution I think

ChelasGsm · 07-06-2005, 13:27

Quote:

Originally Posted by YamahaR1

HeHeHe. Dead for ever. I hate these Moto ****.

dead for ppl o dont now to repair change flash ic and full flash phone again will by alive

06-28-2005, 10:39	#1 (permalink)
deepgsm Freak Poster Join Date: Mar 2003 Location: MOON Age: 50 Posts: 154 Member: 24666 Status: Offline Thanks Meter: 10	V3 dead with SmartMoto Please help URGENT!?!?!?!? I have motorola V3 and flashing with SmartMoto, flash going cool but when i put security area my telefon is dead. When I pres power blinking and not going is flash mode, in the usb port ist same blinking and says usb not rekognized. Do you have solution for for this, because usb cabel for this model is small is not same with V300. For V300 solution is 13 and 14 conector is conected and telefon going to flash mod, but for V3 I don't have any idea for flash mod. THANKS sorry for my bad english

06-29-2005, 10:39	#2 (permalink)
deepgsm Freak Poster Join Date: Mar 2003 Location: MOON Age: 50 Posts: 154 Member: 24666 Status: Offline Thanks Meter: 10	any solution please must be solution for this????????????????

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
5130c dead by flashing please help URGENT	Tapanhaz	MT-BOX	6	02-04-2010 09:16
k1 dead with GOT please help	comtel	Motorola P2k	3	12-07-2006 18:54
Zulea V3 Dead With Usb-Smart Help!!!	samusprime	Motorola P2K (USB-Smart)	0	05-07-2006 18:49
Problem flashing Philips 355, phone dead! Please help! Urgent!	TaSMi	Philips	1	11-08-2004 22:13
p408 dead please help URGENT!!!	.:: SkyElectronic ::.	Trident/AGERE Platform	1	09-10-2004 13:06

06-29-2005, 17:10	#3 (permalink)
gsmuy No Life Poster Join Date: May 2004 Location: the past, which is your future Age: 45 Posts: 602 Member: 65216 Status: Offline Thanks Meter: 23	first, did u backuped full flash first with smartmoto?? if u did so, u can restore full flash and phone will be OK. if not, try to download full flash from smartmoto or for pst, put phone into bootloader mode (press power + * + #) post results

06-30-2005, 11:15	#4 (permalink)
deepgsm Freak Poster Join Date: Mar 2003 Location: MOON Age: 50 Posts: 154 Member: 24666 Status: Offline Thanks Meter: 10	My telephone not going in bootloader mode, when press power only blinking, must be solution for this for the cabel solution with testpoints

06-30-2005, 12:23	#5 (permalink)
OvidelGSM No Life Poster Join Date: Jan 2005 Location: Worldwide Posts: 1,433 Member: 103544 Status: Offline Sonork: 100.75677 Thanks Meter: 155	me too ... i have one .... but someone sad me that his boot is killed and i have no choise ....... THE PHONE IS PERMANENTLY DEAD

07-01-2005, 11:02	#6 (permalink)
deepgsm Freak Poster Join Date: Mar 2003 Location: MOON Age: 50 Posts: 154 Member: 24666 Status: Offline Thanks Meter: 10	Must be solution with cabel, test points or someyhing else

07-02-2005, 20:34	#7 (permalink)
graca Freak Poster Join Date: Sep 2003 Posts: 220 Member: 40446 Status: Offline Thanks Meter: 6	WARNING!!! V3 - 96R IS NOT DOWNGRADABLE!!! victor best!!!!!!!!!!!!!!! makedonac javi se

07-04-2005, 11:59	#8 (permalink)
OvidelGSM No Life Poster Join Date: Jan 2005 Location: Worldwide Posts: 1,433 Member: 103544 Status: Offline Sonork: 100.75677 Thanks Meter: 155	how about unlocking motorola V3 version R374_G_0E.40.3ER_A ???? witch software to use ???

07-04-2005, 13:27	#9 (permalink)
deepgsm Freak Poster Join Date: Mar 2003 Location: MOON Age: 50 Posts: 154 Member: 24666 Status: Offline Thanks Meter: 10	probao sam i sa viktor boxom ali nece da ide ni flash ni flex, kad ga stavis na usb port i kad ga palis on kaze "unlnown usb" ili "usb not rekognized", a telefon celo vreme sam se pali i gasi takozvano trepka. Neznam kako da ga stavim u but mod. Mora da se napravi neki kratak spoj u kabelu isto kako sta ima V300 13i14 se spajaju. Ako mozez da mi das semu za kabel. HVALA

07-04-2005, 13:32	#10 (permalink)
OvidelGSM No Life Poster Join Date: Jan 2005 Location: Worldwide Posts: 1,433 Member: 103544 Status: Offline Sonork: 100.75677 Thanks Meter: 155	i dont understand your language .... and only english is allowed here !!!!

07-05-2005, 19:36	#11 (permalink)
YamahaR1 Freak Poster Join Date: Feb 2002 Location: I am outside your house, I am armed Age: 56 Posts: 482 Member: 9698 Status: Offline Thanks Meter: 0	All Moto phones with the mini usb connector will be dead forever if something goes wrong during unlock or flash. There is no way of getting the phone into flash mode because of the usb interface.

07-05-2005, 19:57	#12 (permalink)
vientangsm Junior Member Join Date: Jul 2004 Age: 55 Posts: 7 Member: 71475 Status: Offline Thanks Meter: 0	Try this for going flashmode:your must using power supply,first off power supply-> press *,# ->on power supply, your try this many time i hope the phone go to flash mode

07-05-2005, 20:04	#13 (permalink)
YamahaR1 Freak Poster Join Date: Feb 2002 Location: I am outside your house, I am armed Age: 56 Posts: 482 Member: 9698 Status: Offline Thanks Meter: 0	HeHeHe. Dead for ever. I hate these Moto ****.

07-06-2005, 11:43	#14 (permalink)
deepgsm Freak Poster Join Date: Mar 2003 Location: MOON Age: 50 Posts: 154 Member: 24666 Status: Offline Thanks Meter: 10	This is big problem, small usb have 6 connectors maybe somebody have solution I think