L7 in Blank Mode but Error in Flashing... - GSM-Forum

jhox2 · 11-12-2008, 15:55

Hello there...

Need assistance for this phone L7...

Problem: L7 Auto-off

Action Made: Prepare Phone in Smart Clip (it failed to connect)
Connect via TP (phone connects and in flash mode)
Tried to flash but failed

Here is the Log:

SmartMoto 3.17
S-Card: jhox2 Smart-Clip dongle, v 2.10, assigned Smart-Clip: jhox2 Europe, initializing... OK
Clip serial: jhox2, version: 4.08, initializing... OK
Searching for phone... found S Blank Neptune LTE2, getting test interface... interface not found
Switching to flash mode... OK
Reading phone boot version... 3.00
Reading flash id...
clip communication failed

The pone now is always in blank mode.

Tried using power supply/smart clip supply but same result

What seems to be the problem?

Please...any idea?

shakeeldawach · 11-12-2008, 16:08

brother flash ic problem

jhox2 · 11-12-2008, 16:32

ok bro i'll try to reheat the flash ic and flash it...

i will post the result...

thanks for the reply...

bhogpurmail · 11-12-2008, 17:44

bro. use ultima box light box for blank mode ............very nice tool for it..

100000% tested by me

unfurtunately, it's update stopped

syrmic · 11-12-2008, 17:55

sir try another flasher
with full betarry

syrmic · 11-12-2008, 17:57

sir try another flasher
with full betarry

Ghost555Ghost · 11-12-2008, 18:08

Nice bull**** comments here.

Install a suitable bootloader and then flash it. Without bootloader, no flashing. (except Image flash)

raezak · 11-12-2008, 18:12

use rsd lite sir

br

weakcy · 11-14-2008, 05:56

bro,try to erase flash.then repair PDS.

11-12-2008, 15:55	#1 (permalink)
jhox2 Major Poster Join Date: Jun 2004 Location: Philippines Posts: 42 Member: 70402 Status: Offline Thanks Meter: 5	L7 in Blank Mode but Error in Flashing... Hello there... Need assistance for this phone L7... Problem: L7 Auto-off Action Made: Prepare Phone in Smart Clip (it failed to connect) Connect via TP (phone connects and in flash mode) Tried to flash but failed Here is the Log: SmartMoto 3.17 S-Card: jhox2 Smart-Clip dongle, v 2.10, assigned Smart-Clip: jhox2 Europe, initializing... OK Clip serial: jhox2, version: 4.08, initializing... OK Searching for phone... found S Blank Neptune LTE2, getting test interface... interface not found Switching to flash mode... OK Reading phone boot version... 3.00 Reading flash id... clip communication failed The pone now is always in blank mode. Tried using power supply/smart clip supply but same result What seems to be the problem? Please...any idea?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
z3 unlocking error!!! now phone in blank mode!!! help please!!!	cobratoo	MSS Box II	8	02-05-2011 18:08
i have n95 in local mode but i cant flash that	.:NorthStar:.	Nokia Hardware & Hardware Repair	2	09-05-2009 11:36
Flashing a V9 in blank mode with RSD Lite	Skrilax_CZ	Motorola P2k	0	11-15-2008 11:23
PST can find c350 when I put it into Repaire mode, but not in normal mode, why?	flysand	Motorola P2k	3	04-16-2004 11:24

11-12-2008, 16:08	#2 (permalink)
shakeeldawach Freak Poster Join Date: Mar 2007 Location: Karachi Posts: 473 Member: 471955 Status: Offline Thanks Meter: 201	brother flash ic problem

11-12-2008, 16:32	#3 (permalink)
jhox2 Major Poster Join Date: Jun 2004 Location: Philippines Posts: 42 Member: 70402 Status: Offline Thanks Meter: 5	ok bro i'll try to reheat the flash ic and flash it... i will post the result... thanks for the reply...

11-12-2008, 17:44	#4 (permalink)
bhogpurmail Registered User Join Date: Oct 2005 Posts: 1,057 Member: 189506 Status: Offline Sonork: 100.1576871 Thanks Meter: 126	bro. use ultima box light box for blank mode ............very nice tool for it.. 100000% tested by me unfurtunately, it's update stopped

11-12-2008, 17:55	#5 (permalink)
syrmic Freak Poster Join Date: Nov 2007 Location: egypt Age: 37 Posts: 245 Member: 625817 Status: Offline Sonork: 1592120 Thanks Meter: 32	sir try another flasher with full betarry

11-12-2008, 17:57	#6 (permalink)
syrmic Freak Poster Join Date: Nov 2007 Location: egypt Age: 37 Posts: 245 Member: 625817 Status: Offline Sonork: 1592120 Thanks Meter: 32	sir try another flasher with full betarry

11-12-2008, 18:08	#7 (permalink)
Ghost555Ghost Freak Poster Join Date: Apr 2008 Posts: 116 Member: 758509 Status: Offline Thanks Meter: 8	Nice bull**** comments here. Install a suitable bootloader and then flash it. Without bootloader, no flashing. (except Image flash)

11-12-2008, 18:12	#8 (permalink)
raezak No Life Poster Join Date: Apr 2006 Location: Badong's Junkshop Posts: 2,749 Member: 260632 Status: Offline Thanks Meter: 639	use rsd lite sir br

11-14-2008, 05:56	#9 (permalink)
weakcy Junior Member Join Date: Nov 2007 Posts: 23 Member: 628217 Status: Offline Thanks Meter: 0	bro,try to erase flash.then repair PDS.