V3i No Keypad/Display lights but phone power up + charge

[xfarenheitx]

Ok,
Initially i had a dead V3i no power-nothing.
So i used Smart Clip with testpoint and Did:
1) Repair PDS (R479) <- my v3i version
2) Full Flash R479 from support
3) Unlock handset.

Now the handset powers up with startup tone but the keypads do not light up or the screen
When i insert the charger the phone makes charge tone and small green charge light is on.
When i connect to PC via usb i have all functions with s/w. So i know s/w is good!
Only problem now is, display and lights.
Could it be the Flexi Cable?

Many Thanks

T

[cellectro]

possible, i had a similar problem where i had to reflash the phone again and it work, try flex first

[xfarenheitx]

I actually flashed it twice.
1st time i flashed it it was in this state so thought i id flash it again but it didnt make any difference.
What i have noticed tho' is that the PC recognises the V3i but when i run RSD Lite 2.7 it states Bootloader as N/A

IMEI: ***************
Technology: Quad-Band GSM
Software Version: R479_G_08.B4.34R
Flex Version: SE7723AXXB104D - 1.0.7.3.0.A.0.L.0.0.1.5.1.0.0.M.4.9.C.0
Bootloader Version: N / A
DRM Version: 0101
Bound Signature: Allowed

Could that be the problem? & also RSD or any other s/w cant get the phone into flash mode.
I have to manually do it via TP.

Some-one must no the solution to this. Im not giving up! Ive been struggling with this phone for a week!! and now im getting somewhere... theres light at the end of the tunnel.... just need to get to it!!


BR

T

[mobitel-centar]

I have a same problem and I flash celular with other softwere with smart-clip and it is been good

[1amigo]

Originally Posted by mobitel-centar

I have a same problem and I flash celular with other softwere with smart-clip and it is been good

which flash file did you use ? please give the name and the link to download

[shankarbrd]

Originally Posted by xfarenheitx

Ok,
Initially i had a dead V3i no power-nothing.
So i used Smart Clip with testpoint and Did:
1) Repair PDS (R479) <- my v3i version
2) Full Flash R479 from support
3) Unlock handset.

Now the handset powers up with startup tone but the keypads do not light up or the screen
When i insert the charger the phone makes charge tone and small green charge light is on.
When i connect to PC via usb i have all functions with s/w. So i know s/w is good!
Only problem now is, display and lights.
Could it be the Flexi Cable?

Many Thanks

T

i have exactly same problem and i have chang flex and lcd from working phone but cant get lcd + light if any body have solution pls help me
thx in advance
wbr shankarbrd

[helplease]

Originally Posted by xfarenheitx

Ok,
Initially i had a dead V3i no power-nothing.
So i used Smart Clip with testpoint and Did:
1) Repair PDS (R479) <- my v3i version
2) Full Flash R479 from support
3) Unlock handset.

Now the handset powers up with startup tone but the keypads do not light up or the screen
When i insert the charger the phone makes charge tone and small green charge light is on.
When i connect to PC via usb i have all functions with s/w. So i know s/w is good!
Only problem now is, display and lights.
Could it be the Flexi Cable?

Many Thanks

T

Same Problem Here.

Can anyone help please?

[khoibt]

You can resolder Q960 which control keypad/display light!

[mentari]

Originally Posted by khoibt

You can resolder Q960 which control keypad/display light!

can u locate where the q960 at?

thanks.

[ogmarco]

i have the same problem to . sombody help me?