v3x unlock smartclip - GSM-Forum

coolmax · 06-03-2006, 15:53

dear members having problems ukocking v3x,heres the log for your viewing,
Searching for phone... found Motorola Phone (RAZRV3x), getting test interface... OK
Model RAZRV3x
Firmware R25221LD_U_85.83.E7P
Reading info OK
Switching to flash mode... OK [S Flash Rainbow POG]
Reading phone boot version... 6.71
Boot prepare... failed
Clip serial: 848800000, version: 2.24, initializing... OK
Searching for phone... no phone found
Clip serial: 848800000, version: 2.24, initializing... OK
Searching for phone... found Motorola Phone (RAZRV3x), getting test interface... OK
Model RAZRV3x
Firmware R25221LD_U_85.83.E7P
Reading info OK
Switching to flash mode... OK [S Flash Rainbow POG]
Reading phone boot version... 6.71
Boot prepare... failed
Reading phone boot version... clip communication failed
Clip serial: 848800000, version: 2.24, initializing... OK
Searching for phone... found Motorola Phone (RAZRV3x), getting test interface... OK
Model RAZRV3x
Firmware R25221LD_U_85.83.E7P
Reading info OK
Switching to flash mode... OK [S Flash Rainbow POG]
Reading phone boot version... 6.71
Boot prepare... failed
Clip serial: 848800000, version: 2.24, initializing... OK
Searching for phone... no phone found
Clip serial: 848800000, version: 2.24, initializing... OK
Searching for phone... found Motorola Phone (RAZRV3x), getting test interface... OK
Model RAZRV3x
Firmware R25221LD_U_85.83.E7P
Reading info OK
Switching to flash mode... OK [S Flash Rainbow POG]
Reading phone boot version... 6.71
Boot prepare... failed...
please shed some light on
wats going wrong? thanx

leofeo79 · 06-03-2006, 21:04

Please Help With Sort This Problem Same .

huden · 06-05-2006, 04:42

Smart clip does not support V3x unlocking. Try on MSS4 box for Motorola professional unlocking.

cupon · 06-05-2006, 04:53

try to use Test point.

smart-clip support v3x 100%

smart user · 06-05-2006, 06:22

i had unlock my v3x with smart clip.it supports 100%.but when u connect the testpoint if there comes error then its ur testpoint fault.connect one end of the wire on the given testpoint nd attach the other end on the soalded area near the testpoint.100% works.

coolmax · 06-05-2006, 09:48

Quote:

Originally Posted by cupon

try to use Test point.

smart-clip support v3x 100%

do u think i fell off the back of a banana boat?...of course i am using test point!!!

coolmax · 06-05-2006, 10:59

thanks for the help..unlcked by soldering wire to test piont..
here is the log for your veiwing.
SmartMoto 1.20
Clip serial: 8488XXXXX, version: 2.25, initializing... OK
Searching for phone... no phone found
Clip serial: 8488XXXXX, version: 2.25, initializing... OK
Searching for phone... no phone found
Clip serial: 8488XXXXX, version: 2.25, initializing... OK
Searching for phone... found S Blank Rainbow POG, getting test interface... interface not found
Switching to flash mode... OK
Reading phone boot version... 3.10
Reading bus width... OK
Reading flash id... Intel-28F256L18B (x2)
Phone group: E770,E1000,E1070, V3x,V975,V1050
Hardware IMEI: 3580030093XXXXX
Security area saved to "S Blank Rainbow POG 3580030093XXXXX.pds"
Unlocking phone... OK.
but now lcd blank,tryed to make pds repair but coming up with error,cannot flash,fone shagged!!

gsmlucky · 06-24-2006, 09:37

V3x
boot loader 6.7.1
R25221LD_U85.83.84P

Plase any 1 give unlock procedure & testpoint picture Pleaseeeeeeeeeee
Thank

sonuk · 06-24-2006, 10:01

i hv smart clip it ask 4
_license so can any body help?

coolmax · 06-24-2006, 10:37

Quote:

Originally Posted by gsmlucky

V3x
boot loader 6.7.1
R25221LD_U85.83.84P

Plase any 1 give unlock procedure & testpoint picture Pleaseeeeeeeeeee
Thank

the same procedure for smartmoto...good luk br

seth_ro · 06-24-2006, 10:53

Quote:

Originally Posted by coolmax

thanks for the help..unlcked by soldering wire to test piont..
here is the log for your veiwing.
SmartMoto 1.20
Clip serial: 8488XXXXX, version: 2.25, initializing... OK
Searching for phone... no phone found
Clip serial: 8488XXXXX, version: 2.25, initializing... OK
Searching for phone... no phone found
Clip serial: 8488XXXXX, version: 2.25, initializing... OK
Searching for phone... found S Blank Rainbow POG, getting test interface... interface not found
Switching to flash mode... OK
Reading phone boot version... 3.10
Reading bus width... OK
Reading flash id... Intel-28F256L18B (x2)
Phone group: E770,E1000,E1070, V3x,V975,V1050
Hardware IMEI: 3580030093XXXXX
Security area saved to "S Blank Rainbow POG 3580030093XXXXX.pds"
Unlocking phone... OK.
but now lcd blank,tryed to make pds repair but coming up with error,cannot flash,fone shagged!!

Are you sure you reconnected the LCD flat cable when you reassembled the phone? Sounds like hardware problem to me, never had this sort of problem when unlocking V3x. I don't think it related to the unlocking process, unless you flashed the phone or something...

Are you using TP when performing PDS repair?

coolmax · 06-24-2006, 12:11

Quote:

Originally Posted by seth_ro

Are you sure you reconnected the LCD flat cable when you reassembled the phone? Sounds like hardware problem to me, never had this sort of problem when unlocking V3x. I don't think it related to the unlocking process, unless you flashed the phone or something...

Are you using TP when performing PDS repair?

i have unlocked v3x in the past no probs...i tryed pds repair using TP but no joy i cannot understand wat happened?

gsmlucky · 06-27-2006, 10:23

Quote:

Originally Posted by coolmax

the same procedure for smartmoto...good luk br

THANK U VERY MUCH SIR FOR UR INFORMATION

I unlock v3x Successful

Again thank u very much for ur information
GSMLUCKY

coolmax · 06-27-2006, 10:35

Quote:

Originally Posted by gsmlucky

THANK U VERY MUCH SIR FOR UR INFORMATION

I unlock v3x Successful

Again thank u very much for ur information
GSMLUCKY

no problems......any time mate

wayne_icu · 07-01-2006, 06:50

bro, i also shot the test point and flashing full flash with smart moto and repair PDS also unlock all is done but "LCD also blanking white screen" can tell me wat is wrong please help.............

06-03-2006, 15:53	#1 (permalink)
coolmax No Life Poster Join Date: Jun 2005 Location: in the line of fire.. Posts: 681 Member: 157118 Status: Offline Thanks Meter: 156	v3x unlock smartclip dear members having problems ukocking v3x,heres the log for your viewing, Searching for phone... found Motorola Phone (RAZRV3x), getting test interface... OK Model RAZRV3x Firmware R25221LD_U_85.83.E7P Reading info OK Switching to flash mode... OK [S Flash Rainbow POG] Reading phone boot version... 6.71 Boot prepare... failed Clip serial: 848800000, version: 2.24, initializing... OK Searching for phone... no phone found Clip serial: 848800000, version: 2.24, initializing... OK Searching for phone... found Motorola Phone (RAZRV3x), getting test interface... OK Model RAZRV3x Firmware R25221LD_U_85.83.E7P Reading info OK Switching to flash mode... OK [S Flash Rainbow POG] Reading phone boot version... 6.71 Boot prepare... failed Reading phone boot version... clip communication failed Clip serial: 848800000, version: 2.24, initializing... OK Searching for phone... found Motorola Phone (RAZRV3x), getting test interface... OK Model RAZRV3x Firmware R25221LD_U_85.83.E7P Reading info OK Switching to flash mode... OK [S Flash Rainbow POG] Reading phone boot version... 6.71 Boot prepare... failed Clip serial: 848800000, version: 2.24, initializing... OK Searching for phone... no phone found Clip serial: 848800000, version: 2.24, initializing... OK Searching for phone... found Motorola Phone (RAZRV3x), getting test interface... OK Model RAZRV3x Firmware R25221LD_U_85.83.E7P Reading info OK Switching to flash mode... OK [S Flash Rainbow POG] Reading phone boot version... 6.71 Boot prepare... failed... please shed some light on wats going wrong? thanx

06-03-2006, 21:04	#2 (permalink)
leofeo79 Junior Member Join Date: Apr 2006 Posts: 5 Member: 255240 Status: Offline Thanks Meter: 0	Same Problem Please Help With Sort This Problem Same .

06-05-2006, 06:22	#5 (permalink)
smart user Registered User Join Date: Feb 2006 Location: pakistan Posts: 487 Member: 236696 Status: Offline Thanks Meter: 30	solution i had unlock my v3x with smart clip.it supports 100%.but when u connect the testpoint if there comes error then its ur testpoint fault.connect one end of the wire on the given testpoint nd attach the other end on the soalded area near the testpoint.100% works.

06-05-2006, 10:59	#7 (permalink)
coolmax No Life Poster Join Date: Jun 2005 Location: in the line of fire.. Posts: 681 Member: 157118 Status: Offline Thanks Meter: 156	thanks for the help..unlcked by soldering wire to test piont.. here is the log for your veiwing. SmartMoto 1.20 Clip serial: 8488XXXXX, version: 2.25, initializing... OK Searching for phone... no phone found Clip serial: 8488XXXXX, version: 2.25, initializing... OK Searching for phone... no phone found Clip serial: 8488XXXXX, version: 2.25, initializing... OK Searching for phone... found S Blank Rainbow POG, getting test interface... interface not found Switching to flash mode... OK Reading phone boot version... 3.10 Reading bus width... OK Reading flash id... Intel-28F256L18B (x2) Phone group: E770,E1000,E1070, V3x,V975,V1050 Hardware IMEI: 3580030093XXXXX Security area saved to "S Blank Rainbow POG 3580030093XXXXX.pds" Unlocking phone... OK. but now lcd blank,tryed to make pds repair but coming up with error,cannot flash,fone shagged!! Last edited by coolmax; 06-05-2006 at 16:28.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Unlocking Smartclip/ufs/nsdongle +++++laptop P4 512mb 60gb $600	the1sales	Sell ur Old and Used Stuff	2	11-21-2007 21:00
RAZER v3x unlock done but need unlock code	chris2007	Smart-Clip	8	07-30-2007 21:31
can't read phone v3x although smartclip see it. pls see log	monsterpassword	Smart-Clip	5	04-06-2007 18:43
v3x unlock smartclip	coolmax	Smart-Clip	4	06-04-2006 21:26
How about the V3x unlocking?	hunk4004	Smart-Clip	1	12-21-2005 20:57

06-05-2006, 04:42	#3 (permalink)
huden Junior Member Join Date: Jun 2006 Posts: 11 Member: 288197 Status: Offline Thanks Meter: 0	Smart clip does not support V3x unlocking. Try on MSS4 box for Motorola professional unlocking.

06-05-2006, 04:53	#4 (permalink)
cupon Freak Poster Join Date: Jan 2005 Location: Sofia ,Bulgaria Age: 49 Posts: 119 Member: 108215 Status: Offline Thanks Meter: 10	try to use Test point. smart-clip support v3x 100%

06-24-2006, 09:37	#8 (permalink)
gsmlucky Crazy Poster Join Date: Oct 2005 Posts: 54 Member: 192095 Status: Offline Thanks Meter: 2	V3x boot loader 6.7.1 R25221LD_U85.83.84P Plase any 1 give unlock procedure & testpoint picture Pleaseeeeeeeeeee Thank

06-24-2006, 10:01	#9 (permalink)
sonuk Freak Poster Join Date: May 2005 Age: 49 Posts: 145 Member: 145469 Status: Offline Thanks Meter: 3	i hv smart clip it ask 4 _license so can any body help?

07-01-2006, 06:50	#15 (permalink)
wayne_icu Freak Poster Join Date: May 2005 Age: 40 Posts: 122 Member: 144350 Status: Offline Thanks Meter: 3	bro, i also shot the test point and flashing full flash with smart moto and repair PDS also unlock all is done but "LCD also blanking white screen" can tell me wat is wrong please help.............