MPx200 Unlocking Problem.??? - GSM-Forum

DrMobile · 06-01-2004, 13:20

I have MPx200.. asking for NETWORK PUK (not PIN)
I have readed the FOLLOWING CODES... using UNIMOTO

NCK Code: 22599469
CCK Code: 82397585
SPCK Code: 64734686
NSCK Code: 80599408
CODE00: 60734699
CODE01: 60715854

Phone is asking for PHONE UNBLOCK CODE: NEW CODE: AGAIAN NEW CODE:

what is the solution to unlock it.

Best Regards,
Wahab

gskhalsa · 06-02-2004, 00:40

Quote:

Originally Posted by DrMobile

I have MPx200.. asking for NETWORK PUK (not PIN)
I have readed the FOLLOWING CODES... using UNIMOTO

NCK Code: 22599469
CCK Code: 82397585
SPCK Code: 64734686
NSCK Code: 80599408
CODE00: 60734699
CODE01: 60715854

Phone is asking for PHONE UNBLOCK CODE: NEW CODE: AGAIAN NEW CODE:

what is the solution to unlock it.

Best Regards,
Wahab

Try 0000 or 1111

gsmuy · 06-03-2004, 05:17

I´m having the same problem.

Which code works for this situation?
have you solved it?

Regards
Rodo

DrMobile · 06-03-2004, 06:53

Quote:

Originally Posted by gsmuy

I´m having the same problem.

Which code works for this situation?
have you solved it?

Regards
Rodo

No.. I don't solved my problem yet. Phone is from AT&T.. and now I have flashed it with europian flash.. becuase At&t don't work on 900Mhz.

but phone is "NETWORK PUK" and I don't know how to open it.

Best Regards,
Wahab

gskhalsa · 06-03-2004, 07:49

Quote:

Originally Posted by DrMobile

No.. I don't solved my problem yet. Phone is from AT&T.. and now I have flashed it with europian flash.. becuase At&t don't work on 900Mhz.

but phone is "NETWORK PUK" and I don't know how to open it.

Best Regards,
Wahab

I think u need to use the NCK code for the Network PUK and if it still asks u for another code...use 0000 or 1111.

That's what I used for unlocking an AT&T with a remote code.

DrMobile · 06-03-2004, 08:57

NETWORK PUK
This phone is only accepts SIMs from specific netowkrs, and has been blocked. Contact you customer service center for the unlock block code.
Unblock code:
[_________]
New password:
[_________]
Re-type new password:
[_________]

i tried everything.. after entering code above i got error

SIM Failure
The action you are attempting is not supported by the SIM

Best Regards,
Wahab

Leo140 · 06-15-2004, 07:35

As I think, PUK code must be provided by the local service provider, in this case mostly cause of user, they put wrong code ( SIM PIN) many time. It happends in my country many time. And this problem is caused of SIM card, not phone, don't try to flash your phone

dani146 · 06-15-2004, 11:12

Hi,
as DrMobile writted here - the requested code is for
NETWORK PUK. Please read the posts above

So it was not about Sim PUK...

WBR,
Daniel M.

evan_silbert · 06-15-2004, 14:20

Maybe flashing it before entering the NCK changed the NCK?

As far as I know AT&T MPX phones hav always been unlockable by the NCK.

UnlockBR · 06-29-2004, 03:58

I just typed all 00000000 for new password and it worked... did the same to 2 phones with same result!!! ;-)

abodawoud · 07-18-2004, 09:27

i have mpx 200 AT&T 900-1800 but it doesnt ask for nck.....
it get into the menu with no service.
is there any trick to get the nck:
br

Hanukkah · 07-18-2004, 12:09

You or somebody else might have entered wrong a few times too many. The phone is probably now in bruteforce attempt mode.

Leave it as with blocked sim and do not touch it for a period of 2 hours... then enter the code and 00000000, repeat.

evan_silbert · 07-18-2004, 16:19

Quote:

Originally Posted by abodawoud

i have mpx 200 AT&T 900-1800 but it doesnt ask for nck.....
it get into the menu with no service.
is there any trick to get the nck:
br

AT&T MPX200 is 1800/1900. Your network is 900 and the phone gets no reception!

It is probably already unlocked...

cracker_jack · 07-18-2004, 19:53

Version 2.20 will be out tonight or tomorrow morning which will correct all MPx200 problems.

aquila09 · 07-20-2004, 10:04

I have an MPX200. I have been given a SIM unlock code so that I can use any SIM on th ephone. I cannot get to the screen to enter this as like the guys above I get a Network PUK screen. I have keyed the code supplied by my supplier and followed up with 00000000 as the new password. I then get the SIM failure screen which says "the action you are attempting is not supported by this SIM" Can anyone shed some light on how I can progress from this.
Thanks

06-01-2004, 13:20	#1 (permalink)
DrMobile No Life Poster Join Date: Aug 2001 Location: P A K I S T A N _____________ Age: 40 Posts: 3,579 Member: 5932 Status: Offline Thanks Meter: 1,694	MPx200 Unlocking Problem.??? I have MPx200.. asking for NETWORK PUK (not PIN) I have readed the FOLLOWING CODES... using UNIMOTO NCK Code: 22599469 CCK Code: 82397585 SPCK Code: 64734686 NSCK Code: 80599408 CODE00: 60734699 CODE01: 60715854 Phone is asking for PHONE UNBLOCK CODE: NEW CODE: AGAIAN NEW CODE: what is the solution to unlock it. Best Regards, Wahab

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Samsung Jet S800 Unlock problem	javakiller	Z3X-Team Products	8	05-15-2010 12:14
unlocking problem in MPx200	waqarmunir4	Smart-Clip	12	12-12-2007 15:26
MPX200 unlocking problem	mashraf32	Smart-Clip	0	06-24-2007 15:18
mpx200 unlock code problem	zbomberman	UniMoto	2	01-26-2005 17:02
MPx200 unlock problem! nck:*******	kockoo	UniMoto	9	09-02-2004 12:17

06-03-2004, 05:17	#3 (permalink)
gsmuy No Life Poster Join Date: May 2004 Location: the past, which is your future Age: 45 Posts: 602 Member: 65216 Status: Offline Thanks Meter: 23	I´m having the same problem. Which code works for this situation? have you solved it? Regards Rodo

06-03-2004, 08:57	#6 (permalink)
DrMobile No Life Poster Join Date: Aug 2001 Location: P A K I S T A N _____________ Age: 40 Posts: 3,579 Member: 5932 Status: Offline Thanks Meter: 1,694	NETWORK PUK This phone is only accepts SIMs from specific netowkrs, and has been blocked. Contact you customer service center for the unlock block code. Unblock code: [_________] New password: [_________] Re-type new password: [_________] i tried everything.. after entering code above i got error SIM Failure The action you are attempting is not supported by the SIM Best Regards, Wahab

06-15-2004, 07:35	#7 (permalink)
Leo140 No Life Poster Join Date: Nov 2003 Age: 46 Posts: 823 Member: 43076 Status: Offline Thanks Meter: 10	As I think, PUK code must be provided by the local service provider, in this case mostly cause of user, they put wrong code ( SIM PIN) many time. It happends in my country many time. And this problem is caused of SIM card, not phone, don't try to flash your phone

06-15-2004, 11:12	#8 (permalink)
dani146 Product Supporter Join Date: Mar 2001 Location: Cluj,Romania Age: 51 Posts: 1,107 Member: 3812 Status: Offline Thanks Meter: 3	Hi, as DrMobile writted here - the requested code is for NETWORK PUK. Please read the posts above So it was not about Sim PUK... WBR, Daniel M.

06-15-2004, 14:20	#9 (permalink)
evan_silbert No Life Poster Join Date: Feb 2003 Location: Boston Posts: 5,027 Member: 21920 Status: Offline Thanks Meter: 10	Maybe flashing it before entering the NCK changed the NCK? As far as I know AT&T MPX phones hav always been unlockable by the NCK.

06-29-2004, 03:58	#10 (permalink)
UnlockBR No Life Poster Join Date: Apr 2003 Location: Sao Paulo - BRAZIL Age: 49 Posts: 1,512 Member: 26751 Status: Offline Thanks Meter: 2	I just typed all 00000000 for new password and it worked... did the same to 2 phones with same result!!! ;-)

07-18-2004, 09:27	#11 (permalink)
abodawoud Insane Poster Join Date: Apr 2004 Age: 60 Posts: 94 Member: 63450 Status: Offline Thanks Meter: 2	i have mpx 200 AT&T 900-1800 but it doesnt ask for nck..... it get into the menu with no service. is there any trick to get the nck: br

07-18-2004, 12:09	#12 (permalink)
Hanukkah No Life Poster Join Date: Jul 2001 Location: RP Age: 48 Posts: 890 Member: 5246 Status: Offline Thanks Meter: 9	You or somebody else might have entered wrong a few times too many. The phone is probably now in bruteforce attempt mode. Leave it as with blocked sim and do not touch it for a period of 2 hours... then enter the code and 00000000, repeat.

07-18-2004, 19:53	#14 (permalink)
cracker_jack No Life Poster Join Date: Jul 2004 Posts: 519 Member: 72951 Status: Offline Thanks Meter: 63	Version 2.20 will be out tonight or tomorrow morning which will correct all MPx200 problems.

07-20-2004, 10:04	#15 (permalink)
aquila09 Junior Member Join Date: Jul 2004 Age: 67 Posts: 3 Member: 73986 Status: Offline Thanks Meter: 0	I have an MPX200. I have been given a SIM unlock code so that I can use any SIM on th ephone. I cannot get to the screen to enter this as like the guys above I get a Network PUK screen. I have keyed the code supplied by my supplier and followed up with 00000000 as the new password. I then get the SIM failure screen which says "the action you are attempting is not supported by this SIM" Can anyone shed some light on how I can progress from this. Thanks