Can't flash lgw3000 - GSM-Forum

Alex1234 · 08-09-2003, 08:10

Connect phone
starting program (floader)
+5v on 26 pin
phone lights
press power on
floader says 'loading ram program'
bar is stopping near end
silence...

Cable is original (dk15g).
What i do wrong?
or it's hardware problem?

Chuk · 08-09-2003, 08:14

Set correct COM port speed

Alex1234 · 08-09-2003, 10:45

I try all speeds and 2 computers....
no effect

Chuk · 08-09-2003, 11:14

Then Your cable is wrong for flashing

lelik · 08-13-2003, 00:21

Connect phone
starting program (floader)
+5v on 26 pin
phone lights
press power on
floader says 'loading ram program'
bar is stopping near end
silence...

Cable is original (dk15g).
What i do wrong?
or it's hardware problem?

##########################################

what the pin 26?
to my mind phone don`t lights
check the cable
u need only rx tx gnd and if u start floader and after it keep button key all be nice
or sort VBAT and PWON and without button key

Alex1234 · 08-14-2003, 05:25

Is it foreign forum?

))
Russia & Ukraine only in this thread

okkupiruem skoro ves net.

HFP · 08-14-2003, 11:40

becouse LG is " Lenin Giv". This firm occupied the Russian and Ukrainian market and it sells the poor quality technique for poor people.IMHO.
Have a nice day.
Peter.

Invader · 08-14-2003, 11:59

Try to press power on and when progress bar starts, keep pressing this button all time while flashing

Chuk · 08-14-2003, 12:12

Good way for drill fingers

5 minutes for making good cable for flashing. And no need drilling fingers

Chuk · 08-14-2003, 12:16

3 wires and 1 jumper

Alex1234 · 08-15-2003, 04:47

I send this phone to ***. but thanks for help.

08-09-2003, 08:10	#1 (permalink)
Alex1234 Freak Poster Join Date: Jun 2003 Location: Russia Age: 34 Posts: 285 Member: 31044 Status: Offline Thanks: 2 Thanked 0 Times in 0 Posts	Can't flash lgw3000 Connect phone starting program (floader) +5v on 26 pin phone lights press power on floader says 'loading ram program' bar is stopping near end silence... Cable is original (dk15g). What i do wrong? or it's hardware problem?

08-09-2003, 11:14	#4 (permalink)
Chuk No Life Poster Join Date: Dec 2001 Location: Ukraine Age: 35 Posts: 1,150 Member: 7767 Status: Offline Thanks: 0 Thanked 3 Times in 3 Posts	Then Your cable is wrong for flashing Last edited by Chuk; 08-09-2003 at 11:21.

08-14-2003, 05:25	#6 (permalink)
Alex1234 Freak Poster Join Date: Jun 2003 Location: Russia Age: 34 Posts: 285 Member: 31044 Status: Offline Thanks: 2 Thanked 0 Times in 0 Posts	Is it foreign forum?)) Russia & Ukraine only in this thread okkupiruem skoro ves net.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Can't flash NEC 338	angel25dz	NEC	0	03-29-2010 12:25
A35-can't flash, can't unlock, can't log!	Migeni	x1x to x45/x50	4	12-21-2002 11:17

08-09-2003, 08:14	#2 (permalink)
Chuk No Life Poster Join Date: Dec 2001 Location: Ukraine Age: 35 Posts: 1,150 Member: 7767 Status: Offline Thanks: 0 Thanked 3 Times in 3 Posts	Set correct COM port speed

08-09-2003, 10:45	#3 (permalink)
Alex1234 Freak Poster Join Date: Jun 2003 Location: Russia Age: 34 Posts: 285 Member: 31044 Status: Offline Thanks: 2 Thanked 0 Times in 0 Posts	I try all speeds and 2 computers.... no effect

08-13-2003, 00:21	#5 (permalink)
lelik Freak Poster Join Date: Feb 2003 Location: Minsk Age: 33 Posts: 159 Member: 20834 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	Connect phone starting program (floader) +5v on 26 pin phone lights press power on floader says 'loading ram program' bar is stopping near end silence... Cable is original (dk15g). What i do wrong? or it's hardware problem? ########################################## what the pin 26? to my mind phone don`t lights check the cable u need only rx tx gnd and if u start floader and after it keep button key all be nice or sort VBAT and PWON and without button key

08-14-2003, 11:40	#7 (permalink)
HFP No Life Poster Join Date: Mar 2001 Location: Ukraine,Kiev Age: 37 Posts: 1,608 Member: 3529 Status: Offline Thanks: 0 Thanked 1 Time in 1 Post	becouse LG is " Lenin Giv". This firm occupied the Russian and Ukrainian market and it sells the poor quality technique for poor people.IMHO. Have a nice day. Peter.

08-14-2003, 11:59	#8 (permalink)
Invader No Life Poster Join Date: Jun 2000 Location: Ukraine Posts: 1,236 Member: 1580 Status: Offline Thanks: 1 Thanked 1 Time in 1 Post	Try to press power on and when progress bar starts, keep pressing this button all time while flashing

08-14-2003, 12:12	#9 (permalink)
Chuk No Life Poster Join Date: Dec 2001 Location: Ukraine Age: 35 Posts: 1,150 Member: 7767 Status: Offline Thanks: 0 Thanked 3 Times in 3 Posts	Good way for drill fingers 5 minutes for making good cable for flashing. And no need drilling fingers

08-14-2003, 12:16	#10 (permalink)
Chuk No Life Poster Join Date: Dec 2001 Location: Ukraine Age: 35 Posts: 1,150 Member: 7767 Status: Offline Thanks: 0 Thanked 3 Times in 3 Posts	3 wires and 1 jumper

08-15-2003, 04:47	#11 (permalink)
Alex1234 Freak Poster Join Date: Jun 2003 Location: Russia Age: 34 Posts: 285 Member: 31044 Status: Offline Thanks: 2 Thanked 0 Times in 0 Posts	I send this phone to ***. but thanks for help.