How to Update LG Optimus One P500 with Official Gingerbread 2.3.3 V20G Firmware - GSM-Forum

akhtarmughal · 06-24-2012, 10:32

Procedure to Update LG Optimus One P500 with V20G Gingerbread 2.3.3:

Download the Optimus One P500 V20G firmware package from here to your computer and extract the same.

Once extracted, you now need to run the LGMDP-v1.5.exe file after which you will get the below mentioned pop up.

Select the PORT, connect your phone and choose your phone. After this, you need to now click on Image folder and then browse to the directory where the file has been unpacked.

Now, you will have to click on “Ok” for 3 times and you will get the warnings. Please note that you should not mess with any other settings as it if changed it may even brick the device.

Now, close the Window and click on the “Download” button. In the process of updating, it will back up your IMEI and MACs to .NV2 file, reboot your phone to emergency mode, flash recovery, reboot and restore the NV2 backup.

It will take around 5 – 6 minutes to update the device and once it’s done the device will be restarted.

Note: Just in case if the device booted up or gets into the boot loop mode then you need to re follow the above mentioned steps with the help of above mentioned instructions.

Do let us know in the comments section just in case if there are any issues faced in the process of updating this ICS firmware. Congratulations, you have successfully applied the update of V20G Gingerbread 2.3.3 firmware in your Optimus One P500.

hala_gsm_egypt · 07-01-2012, 16:53

how to enter emergency mode?

06-24-2012, 10:32	#1 (permalink)
akhtarmughal No Life Poster Join Date: Oct 2007 Location: Pakistan Age: 26 Posts: 984 Member: 617073 Status: Offline Sonork: 100.1611349 Thanks: 33 Thanked 168 Times in 133 Posts	How to Update LG Optimus One P500 with Official Gingerbread 2.3.3 V20G Firmware Procedure to Update LG Optimus One P500 with V20G Gingerbread 2.3.3: Download the Optimus One P500 V20G firmware package from here to your computer and extract the same. Once extracted, you now need to run the LGMDP-v1.5.exe file after which you will get the below mentioned pop up. Select the PORT, connect your phone and choose your phone. After this, you need to now click on Image folder and then browse to the directory where the file has been unpacked. Now, you will have to click on “Ok” for 3 times and you will get the warnings. Please note that you should not mess with any other settings as it if changed it may even brick the device. Now, close the Window and click on the “Download” button. In the process of updating, it will back up your IMEI and MACs to .NV2 file, reboot your phone to emergency mode, flash recovery, reboot and restore the NV2 backup. It will take around 5 – 6 minutes to update the device and once it’s done the device will be restarted. Note: Just in case if the device booted up or gets into the boot loop mode then you need to re follow the above mentioned steps with the help of above mentioned instructions. Do let us know in the comments section just in case if there are any issues faced in the process of updating this ICS firmware. Congratulations, you have successfully applied the update of V20G Gingerbread 2.3.3 firmware in your Optimus One P500.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Help with 6110	paulomt1	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	3	05-25-2009 16:29

07-01-2012, 16:53	#2 (permalink)
hala_gsm_egypt Freak Poster Join Date: Jun 2007 Location: Egypt Posts: 305 Member: 534871 Status: Offline Sonork: 100.1607626 Thanks: 478 Thanked 277 Times in 119 Posts	how to enter emergency mode?