LG 8360 help plz look & help if you can! - GSM-Forum

thebrittishguy · 08-06-2006, 01:05

I am trying to get my LG u8360 to connect to Vygis LG Tool 1.2 (free) after flashing with LG-U8330_U8360_V10_full.bif, but when connecting phone it to flash the GDFS and it

starts to load flash loader = ok.

When loading certificate loader, it says phone not respond at 3%???

phone is fully charged and 9v battery is fully charged but i cant get any further than that???

i have attached screenshots for you to see....

i dont know what to do, the phone is 'dead'.........

any help will be much appreciated

i have searched through the forum ad nothing has helped so far,. and nobody has had this (from what i can see)

i SETool wont work either..... the recovery function.

thank you in advance

softel2004 · 08-06-2006, 02:01

I Advice You To Cherch One Mate Who Has Original Vigys And He Will Repair It Easely No Need To Go Far With Craked Vigys

thebrittishguy · 08-06-2006, 10:44

thank you for that, does anyone else have any suggestions?

adi2002 · 08-06-2006, 10:51

try with testpoint...

thebrittishguy · 08-06-2006, 11:42

im sorry if this sounds silly, but with the testpoint you take the pcb out, and on the back you have to connect the ground and TP.

does your battery have to be connected or just the data cable? or how do you go about it, i have read up on the forum and they just say connect TP, but say nothing about whether anything else has to be connected or how to go about connecting it........

pls could you explain step by step how, as id rather be sure before trying anything.

thank you in advance!

thebrittishguy · 08-08-2006, 15:28

any info on the above please

nizou_gsm · 08-08-2006, 15:43

freind u need select u8330 TP
press connect
vygis ask u for tp connect tp to the gnd
press ok
then disconnect tp

nizou_gsm · 08-08-2006, 15:44

dont forget u need select u8330 TP

thebrittishguy · 08-08-2006, 15:46

thank you for that , how do i power the pcb though?
because you dont put the phone back in its casing with the tp connected, right?

nizou_gsm · 08-08-2006, 15:47

here u can find all software for ur phone http://www.spunlock.com/eminemgsm/lg.htm

nizou_gsm · 08-08-2006, 15:53

You can weld two threads and assemble the phone and when it asks for tp you to connect just both thread

thebrittishguy · 08-08-2006, 16:07

Thank you for your Help!

Much appreciated

bsb1106 · 08-13-2006, 15:21

for flashing you need test point

thebrittishguy · 08-13-2006, 17:22

Right, we are past the point that i need a test point, i know this.

but here is a picture of my pcb, could you show me where to connect the tp and ground please? as my board seems to be newer than the current posted pics, please illustrate for me.

thank you in advance

thebrittishguy · 08-14-2006, 07:06

anybody able to help with the above? please read and reply.

08-06-2006, 10:44	#3 (permalink)
thebrittishguy Junior Member Join Date: Oct 2005 Age: 39 Posts: 30 Member: 187135 Status: Offline Thanks Meter: 0	thanks thank you for that, does anyone else have any suggestions?

08-06-2006, 11:42	#5 (permalink)
thebrittishguy Junior Member Join Date: Oct 2005 Age: 39 Posts: 30 Member: 187135 Status: Offline Thanks Meter: 0	im sorry if this sounds silly, but with the testpoint you take the pcb out, and on the back you have to connect the ground and TP. does your battery have to be connected or just the data cable? or how do you go about it, i have read up on the forum and they just say connect TP, but say nothing about whether anything else has to be connected or how to go about connecting it........ pls could you explain step by step how, as id rather be sure before trying anything. thank you in advance! Last edited by thebrittishguy; 08-08-2006 at 11:21.

08-13-2006, 15:21	#13 (permalink)
bsb1106 Insane Poster Join Date: Oct 2004 Age: 43 Posts: 76 Member: 88503 Status: Offline Thanks Meter: 0	you need test point for flashing you need test point

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Remoteunlock.eu: The CHEAPEST & BEST Codes Server ..catch us if you can! ;-)	saejor	Main Sales Section	0	03-02-2010 00:53
plz help me if you can	med26	Sony Ericsson	1	02-28-2010 15:06
Looking for factory for cables production. If you can produce, please, read...	InfinitySupport	Infinity-Box	2	09-05-2007 14:07
Looking for factory for cables production. If you can produce, please, read...	InfinityHelp	Wanted Products	0	08-25-2007 20:13
Give Me A Helping Hand If You Can	sunrise gsm	Infineon C16X M51 & ARM7 M52 BASED	7	03-02-2004 21:09

08-06-2006, 02:01	#2 (permalink)
softel2004 Registered User Join Date: Jul 2004 Location: tunis tunisia Age: 54 Posts: 345 Member: 74413 Status: Offline Thanks Meter: 10	I Advice You To Cherch One Mate Who Has Original Vigys And He Will Repair It Easely No Need To Go Far With Craked Vigys

08-06-2006, 10:51	#4 (permalink)
adi2002 Insane Poster Join Date: Mar 2003 Location: Europe Age: 50 Posts: 60 Member: 24520 Status: Offline Thanks Meter: 0	try with testpoint...

08-08-2006, 15:28	#6 (permalink)
thebrittishguy Junior Member Join Date: Oct 2005 Age: 39 Posts: 30 Member: 187135 Status: Offline Thanks Meter: 0	any info on the above please

08-08-2006, 15:43	#7 (permalink)
nizou_gsm Freak Poster Join Date: Jul 2006 Location: Tunisia my love Age: 43 Posts: 314 Member: 304362 Status: Offline Thanks Meter: 347	freind u need select u8330 TP press connect vygis ask u for tp connect tp to the gnd press ok then disconnect tp

08-08-2006, 15:44	#8 (permalink)
nizou_gsm Freak Poster Join Date: Jul 2006 Location: Tunisia my love Age: 43 Posts: 314 Member: 304362 Status: Offline Thanks Meter: 347	dont forget u need select u8330 TP

08-08-2006, 15:46	#9 (permalink)
thebrittishguy Junior Member Join Date: Oct 2005 Age: 39 Posts: 30 Member: 187135 Status: Offline Thanks Meter: 0	thank you for that , how do i power the pcb though? because you dont put the phone back in its casing with the tp connected, right?

08-08-2006, 15:47	#10 (permalink)
nizou_gsm Freak Poster Join Date: Jul 2006 Location: Tunisia my love Age: 43 Posts: 314 Member: 304362 Status: Offline Thanks Meter: 347	here u can find all software for ur phone http://www.spunlock.com/eminemgsm/lg.htm

08-08-2006, 15:53	#11 (permalink)
nizou_gsm Freak Poster Join Date: Jul 2006 Location: Tunisia my love Age: 43 Posts: 314 Member: 304362 Status: Offline Thanks Meter: 347	You can weld two threads and assemble the phone and when it asks for tp you to connect just both thread

08-08-2006, 16:07	#12 (permalink)
thebrittishguy Junior Member Join Date: Oct 2005 Age: 39 Posts: 30 Member: 187135 Status: Offline Thanks Meter: 0	Thank you for your Help! Much appreciated

08-13-2006, 17:22	#14 (permalink)
thebrittishguy Junior Member Join Date: Oct 2005 Age: 39 Posts: 30 Member: 187135 Status: Offline Thanks Meter: 0	Right, we are past the point that i need a test point, i know this. but here is a picture of my pcb, could you show me where to connect the tp and ground please? as my board seems to be newer than the current posted pics, please illustrate for me. thank you in advance

08-14-2006, 07:06	#15 (permalink)
thebrittishguy Junior Member Join Date: Oct 2005 Age: 39 Posts: 30 Member: 187135 Status: Offline Thanks Meter: 0	anybody able to help with the above? please read and reply.