LG C375 restart if sim is inserted done! - GSM-Forum

julsdigi · 03-10-2012, 11:34

this is just a reference for those who have setool box..Since LG C375 is not yet supported for flashing in LGE Tool, i used LG multiloader or the GSMULTI V3. If you don't have one, you can DL from here.

Unit: LG C375

Problem: Restart if sim card is inserted, normal without sim card.

Tools and software needed:
*Setoolbox
*Micro UART (GS102) cable (cable should be compatible with setoolbox)
*GSMULTI V3
*LG C375 DLL file (DL here)
*LG C375 firmware (DL here)

Procedure:

*Install GSMULTI V3
*Connect Setool box
*Open GSMULTI v3 then click "settings" then "configuration".
*After that, just follow the picture below.
1. Load dll file
2. Load Firmware
3. Select UART
4. Click OK

*Ready the unit, remove the battery; connect cable to box
*Click "Start" then connect the unit in the box without the battery. Take note, there should be no battery in the phone.
Screenshots:

*Just wait for the loader to finish (approx. 20-25mins) until you see "PASS" in the multiloader.
*Test unit with sim card then viola!! your phone should be ok..

here's mine...

thanks for viewing..

br,
julsdigi

cokepie · 03-13-2012, 11:46

setool box is must? not possible via usb cable?

I don't have this box but i want to flash my lg c375....

kulz25 · 04-23-2012, 10:06

sir can you upload again the firmware... thanks

dez com · 04-25-2012, 18:13

Quote:

Originally Posted by julsdigi

this is just a reference for those who have setool box..Since LG C375 is not yet supported for flashing in LGE Tool, i used LG multiloader or the GSMULTI V3. If you don't have one, you can DL from here.

Unit: LG C375

Problem: Restart if sim card is inserted, normal without sim card.

Tools and software needed:
*Setoolbox
*Micro UART (GS102) cable (cable should be compatible with setoolbox)
*GSMULTI V3
*LG C375 DLL file (DL here)
*LG C375 firmware (DL here)

Procedure:

*Install GSMULTI V3
*Connect Setool box
*Open GSMULTI v3 then click "settings" then "configuration".
*After that, just follow the picture below.
1. Load dll file
2. Load Firmware
3. Select UART
4. Click OK

*Ready the unit, remove the battery; connect cable to box
*Click "Start" then connect the unit in the box without the battery. Take note, there should be no battery in the phone.
Screenshots:

*Just wait for the loader to finish (approx. 20-25mins) until you see "PASS" in the multiloader.
*Test unit with sim card then viola!! your phone should be ok..

here's mine...

thanks for viewing..

br,
julsdigi

the files was remove pls upload it again thanks advance for helper

IORYAGAMI · 05-12-2012, 23:45

Quote:

Originally Posted by julsdigi

this is just a reference for those who have setool box..Since LG C375 is not yet supported for flashing in LGE Tool, i used LG multiloader or the GSMULTI V3. If you don't have one, you can DL from here.

Unit: LG C375

Problem: Restart if sim card is inserted, normal without sim card.

Tools and software needed:
*Setoolbox
*Micro UART (GS102) cable (cable should be compatible with setoolbox)
*GSMULTI V3
*LG C375 DLL file (DL here)
*LG C375 firmware (DL here)

Procedure:

*Install GSMULTI V3
*Connect Setool box
*Open GSMULTI v3 then click "settings" then "configuration".
*After that, just follow the picture below.
1. Load dll file
2. Load Firmware
3. Select UART
4. Click OK

*Ready the unit, remove the battery; connect cable to box
*Click "Start" then connect the unit in the box without the battery. Take note, there should be no battery in the phone.
Screenshots:

*Just wait for the loader to finish (approx. 20-25mins) until you see "PASS" in the multiloader.
*Test unit with sim card then viola!! your phone should be ok..

here's mine...

thanks for viewing..

br,
julsdigi

hello friend

friend I would like to know if that flash has Spanish language??

thanks

Bay · 05-14-2012, 15:08

Please reapload firmware ,

GSM_MARSHALS · 06-11-2012, 01:21

please upload firmware again, link removed ...

BR

Leonard_Kyle · 07-23-2012, 08:13

upload firmware please

afser · 08-03-2012, 07:38

Quote:

Originally Posted by julsdigi

this is just a reference for those who have setool box..Since LG C375 is not yet supported for flashing in LGE Tool, i used LG multiloader or the GSMULTI V3. If you don't have one, you can DL from here.

Unit: LG C375

Problem: Restart if sim card is inserted, normal without sim card.

Tools and software needed:
*Setoolbox
*Micro UART (GS102) cable (cable should be compatible with setoolbox)
*GSMULTI V3
*LG C375 DLL file (DL here)
*LG C375 firmware (DL here)

Procedure:

*Install GSMULTI V3
*Connect Setool box
*Open GSMULTI v3 then click "settings" then "configuration".
*After that, just follow the picture below.
1. Load dll file
2. Load Firmware
3. Select UART
4. Click OK

*Ready the unit, remove the battery; connect cable to box
*Click "Start" then connect the unit in the box without the battery. Take note, there should be no battery in the phone.
Screenshots:

*Just wait for the loader to finish (approx. 20-25mins) until you see "PASS" in the multiloader.
*Test unit with sim card then viola!! your phone should be ok..

here's mine...

thanks for viewing..

br,
julsdigi

please uplode flash file

.::TEJARAM::. · 08-03-2012, 08:40

File Removed for Violation.

The file you requested has been removed from MediaFire for a violation of our Terms of Service.

If you believe you have reached this page in error, please submit a ticket.
Click here to view our help resources

wbr

tejaram

.::TEJARAM::. · 08-03-2012, 08:41

File Removed for Violation.

The file you requested has been removed from MediaFire for a violation of our Terms of Service.

If you believe you have reached this page in error, please submit a ticket.
Click here to view our help resources

wbr

tejaram

nasirahmed · 08-03-2012, 08:51

LG C375 Firmware
LGC375AT-00-V10e-ARE-XXX-JAN-13-2012

LG C375 DLL
C375_110726.rar

GSMulti V30
SETUP_GSMULTI_V3.0.rar

afser · 08-03-2012, 14:21

Quote:

Originally Posted by nasirahmed

LG C375 Firmware
LGC375AT-00-V10e-ARE-XXX-JAN-13-2012

LG C375 DLL
C375_110726.rar

GSMulti V30
SETUP_GSMULTI_V3.0.rar

100000000% thankssssssssssssssssssssssssssssssssssss

bhagatsir · 10-06-2012, 10:02

link not work100000000% thankssssssssssssssssssssssssssssssssssss

siddiqueshaikh · 10-12-2012, 16:18

mr julsdiqi i tested thanks very much
I SALUTE U

03-10-2012, 11:34	#1 (permalink)
julsdigi Junior Member Join Date: Jul 2008 Posts: 18 Member: 819932 Status: Offline Thanks Meter: 6	LG C375 restart if sim is inserted done! this is just a reference for those who have setool box..Since LG C375 is not yet supported for flashing in LGE Tool, i used LG multiloader or the GSMULTI V3. If you don't have one, you can DL from here. Unit: LG C375 Problem: Restart if sim card is inserted, normal without sim card. Tools and software needed: Setoolbox Micro UART (GS102) cable (cable should be compatible with setoolbox) GSMULTI V3 LG C375 DLL file (DL here) LG C375 firmware (DL here) Procedure: Install GSMULTI V3 Connect Setool box Open GSMULTI v3 then click "settings" then "configuration". After that, just follow the picture below. 1. Load dll file 2. Load Firmware 3. Select UART 4. Click OK Ready the unit, remove the battery; connect cable to box Click "Start" then connect the unit in the box without the battery. Take note, there should be no battery in the phone. Screenshots: Just wait for the loader to finish (approx. 20-25mins) until you see "PASS" in the multiloader. *Test unit with sim card then viola!! your phone should be ok.. here's mine... thanks for viewing.. br, julsdigi

06-11-2012, 01:21	#7 (permalink)
GSM_MARSHALS No Life Poster Join Date: Sep 2004 Location: SKYPE: will.catcher Age: 39 Posts: 500 Member: 81832 Status: Offline Thanks Meter: 53	hello please upload firmware again, link removed ... BR

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
my 8810 is phone locked ,can somebody please help	duyphuc	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	18	12-23-2014 09:03
SIM restriction pending -- what does it mean?	Ryu	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	7	07-17-2011 10:05

03-13-2012, 11:46	#2 (permalink)
cokepie Junior Member Join Date: May 2010 Posts: 14 Member: 1309899 Status: Offline Thanks Meter: 0	setool box is must? not possible via usb cable? I don't have this box but i want to flash my lg c375....

04-23-2012, 10:06	#3 (permalink)
kulz25 Major Poster Join Date: Oct 2004 Location: PHILIPPINES Posts: 44 Member: 87487 Status: Offline Thanks Meter: 8	sir can you upload again the firmware... thanks

05-14-2012, 15:08	#6 (permalink)
Bay Freak Poster Join Date: Dec 2000 Location: Burkina Faso , Bobo Dioulasso Age: 53 Posts: 414 Member: 2920 Status: Offline Thanks Meter: 21	Please reapload firmware ,

07-23-2012, 08:13	#8 (permalink)
Leonard_Kyle Insane Poster Join Date: Apr 2008 Location: Cebu, Philippines Posts: 93 Member: 742292 Status: Offline Thanks Meter: 92	upload firmware please

08-03-2012, 08:40	#10 (permalink)
.::TEJARAM::. No Life Poster Join Date: Nov 2011 Location: .::INDIA::. Age: 35 Posts: 3,459 Member: 1681461 Status: Offline Sonork: [OFFLINE] Thanks Meter: 1,011	File Removed for Violation. The file you requested has been removed from MediaFire for a violation of our Terms of Service. If you believe you have reached this page in error, please submit a ticket. Click here to view our help resources wbr tejaram

08-03-2012, 08:41	#11 (permalink)
.::TEJARAM::. No Life Poster Join Date: Nov 2011 Location: .::INDIA::. Age: 35 Posts: 3,459 Member: 1681461 Status: Offline Sonork: [OFFLINE] Thanks Meter: 1,011	File Removed for Violation. The file you requested has been removed from MediaFire for a violation of our Terms of Service. If you believe you have reached this page in error, please submit a ticket. Click here to view our help resources wbr tejaram

08-03-2012, 08:51	#12 (permalink)
nasirahmed No Life Poster Join Date: Mar 2004 Location: LGE Posts: 3,950 Member: 57760 Status: Offline Sonork: 100.1579298 Thanks Meter: 3,510	LG C375 Firmware LGC375AT-00-V10e-ARE-XXX-JAN-13-2012 LG C375 DLL C375_110726.rar GSMulti V30 SETUP_GSMULTI_V3.0.rar

10-06-2012, 10:02	#14 (permalink)
bhagatsir Freak Poster Join Date: Sep 2011 Location: saharanpur Posts: 172 Member: 1661299 Status: Offline Sonork: 100.1622657 Thanks Meter: 31	link not work100000000% thankssssssssssssssssssssssssssssssssssss

10-12-2012, 16:18	#15 (permalink)
siddiqueshaikh Freak Poster Join Date: Oct 2007 Location: mumbau Posts: 159 Member: 601808 Status: Offline Sonork: 1618903 Thanks Meter: 14	mr julsdiqi i tested thanks very much I SALUTE U