LG KS360 " Unlocking Guide" Complete! - GSM-Forum

liamguest · 01-05-2010, 05:44

Like to add this is a copy from my forum but i thought ide put it on here.
i made this guide as simple as possible.! XD enjoy.

Below is a Guide on how to unlock lg ks360
I JUST TRIED THIS ON MY GIRLFRIENDS PHONE AND IT WORKS!

But still im not liable for damaged if you attempt this.!
AND MESS IT UP even though i have not found any reason
why it would not work.!
---------------------------------------------------------------------------------------------
This works without uploading anything to the phone. Just follow the instructions carefully.

You will need 3 bits of software to perform the unlock - get them all now

Here is how to unlock the LG KS360:
You will need the following tools:
DRIVER: http://www.megaupload.com/?d=CIV0LPQ2
KS 360 UTILS (ENGLISH): http://www.megaupload.com/?d=9Q5G4CT1
KS 360 UTILS (FRENCH ): http://www.megaupload.com/?d=VVI89Q3T
KS360.flb: http://www.megaupload.com/?d=OPJMLSV0

Step By Step Guide ( After all files downloaded )
1 / Uninstall all drivers and LG "LG PC Suite". ( To Do With LG Phone )
2 / Restart the PC for the changes to take effect.
3 / Go to Install all the "SetUp" files ".exe" in the DRIVERS download you downloaded.
4 / Turn off your phone and remove the battery and SIM.!! (MUST DO)
5 / Connect to the PC. It is normally detected as a "Flash Loader Utility. (Still without battery and sim)
6 / Unplug the phone ( once it says installed flash utility )

7 / Place the (KS360.flb File(UnZipped)) in the disc drive C:/ Or D:/
8 / Run "KS360-Utils-EN.exe" Press: O (Backup STATIC_EEP partition...)
9 / Type: O (Backup STATIC_EEP partition...) and hit Enter
((( Enter All This WITHOUT SPACES!! )))!
10 / Type: \\.\USB1 then Press Enter (Sometimes it might not be USB1 might be 0 - 5+)
11 / Type: C:\KS360.FLB OR D:\KS360.flb(DEPENDS WHERE YOU PUT THE FILE ) PRESS ENTER
12 / Type: STATIC_EEP ( Remember Capitals or it will allways fail )!! Its not fun! trust me )
13 / Now Here is what i do differantly to what all the guides anywhere else say normally it says
press enter wait just over a second or so and plug the phone in ( Didnt work on a few pcs for me) So what i do is Plug The phone in the second the PC makes a noise to say the USB is plugged in the little " dum dum " sound i press enter then.
-----------------------------------------------------------------------
" chosen: O
DLL version: 4.4,2.0
USB (Ex: \\.\ usb1): \\.\usb1
sec file - package (Ex: c:\KS360_psi.flb): C:\KS360_O \ KS360_psi.flb
Data file: C: \ STATICEEP
Loading ...
Open port ... Connect the phone
Sending sec - Pack ...
package sent ...
reception of data in memory in progress ...
Restarting the phone ...
Restart performs ...
port firm "
------------------------------------------------------------------------

If everything went well you have two files in the root of where your
ks360 utility is one saying static_eep.big and one just saying static_eep
(Delete the static_eep.big its nto needed) place the other file static_eep
with the ks360.flb file in your disc drive.

( You can turn the phone on now with the sim card inside )

14 / Still in the program KS360 Utils en.exe , Type P ( Unlock )
15 / Type D:\STATIC_EEP or C:\STATIC_EEP ( Press enter )
16 / A 8-digit code should appear, WRITE IT DOWN OR JUST KEEP THE PROGRAM OPEN!

17 / Enter the following number (as if you were dialing a phone number): 2945#*71001#
18 / Enter the 8 digit code that you have recovered and do "OK"

Here is your LG KS360 is unlocked.

SIMPLE AS

Feel free to ask questions!

Khayyal · 01-28-2010, 13:20

when i pluged the phone without battery it just on for a second and off and it not shows in computer hardwar

that is ok or what

also how can i know the usb no or i have to try till i get the right one

forgotime · 01-28-2010, 13:36

Good guide, I've tried this for the gw520 but couldn't unlock it. I'm able to re-flash it using this utility but nothing else.

Could it be because I'm not using the correct flb file. How do I make a flb file for the gw520?

Plus the unlock code for the gw520 is 16 digits long

Cheers

forgotime · 01-29-2010, 00:23

OK I was able to make a flb file specifically for the gw520 by extracting the kdz into a mdb file, then turning the mdb into its separate files.

But when I went to unlock it...
" chosen: O
DLL version: 4.4,2.0
USB (Ex: \\.\ usb1): \\.\usb1
sec file - package (Ex: c:\KS360_psi.flb): C:\KS360_O \ KS360_psi.flb
Data file: C: \ STATICEEP
Loading ...
Open port ... Connect the phone
Sending sec - Pack ...
package sent ...
reception of data in memory in progress ...
Restarting the phone ...
Restart performs ...
port firm; timed out ............. so and so

Any pointers?

BigBoy™ · 01-30-2010, 14:42

Maybe you can use a kp500.flb file ?

M4rl · 01-30-2010, 14:57

Thanks dude! Subscribing just in case I need this in the future...

ponix · 02-10-2010, 22:33

any one can test this method???

bazaa · 02-14-2010, 22:42

Yes this works 100%
i have unlocked 2 lg360 phones like this
I did'nt need to remove battery or sim and found my phones were not detected with battery out.
You just need to watch that you type file names correctly and all should go ok .

Thanks for your guide I used a different guide for my 1st phone but was a lot more of messing about.

Smokeybabe · 03-06-2010, 16:20

Not having any luck with unlocking. Please help Im so frustrated. I have followed the step by step guide exactly when i come to entering the actual ulock code i type in 2945*#71001# straight away it comes up with sim lock is not activated
Please please help me. I dont know what else to do.

Thanks xxx

jalex16 · 04-03-2010, 18:33

Will it work with LG GT360?

matore · 04-22-2010, 01:14

Hi! I follow all steps, but when I enter "P" and put STATIC_EEP path, it gives me a 16 digit code.....This is what I get: -92-87-86-90-85-86-82-80 .

What can I do!? (Its a GT360)
THANKS!

samusprime · 05-05-2010, 03:11

works on gt360?????? testing...

diwakarr · 05-07-2010, 09:48

Hi, I tried to unlock LGKS360 as described in the guide however I am not able find STATIC_EEP file when my phone is connected. Can any one tell me what could be the problem?
Thanks,
-----------------------------------------------------------------------

Quote:

Originally Posted by liamguest

Like to add this is a copy from my forum but i thought ide put it on here.
i made this guide as simple as possible.! XD enjoy.

Below is a Guide on how to unlock lg ks360
I JUST TRIED THIS ON MY GIRLFRIENDS PHONE AND IT WORKS!

But still im not liable for damaged if you attempt this.!
AND MESS IT UP even though i have not found any reason
why it would not work.!
---------------------------------------------------------------------------------------------
This works without uploading anything to the phone. Just follow the instructions carefully.

You will need 3 bits of software to perform the unlock - get them all now

Here is how to unlock the LG KS360:
You will need the following tools:
DRIVER: MEGAUPLOAD - The leading online storage and file delivery service
KS 360 UTILS (ENGLISH): MEGAUPLOAD - The leading online storage and file delivery service
KS 360 UTILS (FRENCH ): MEGAUPLOAD - The leading online storage and file delivery service
KS360.flb: MEGAUPLOAD - The leading online storage and file delivery service

Step By Step Guide ( After all files downloaded )
1 / Uninstall all drivers and LG "LG PC Suite". ( To Do With LG Phone )
2 / Restart the PC for the changes to take effect.
3 / Go to Install all the "SetUp" files ".exe" in the DRIVERS download you downloaded.
4 / Turn off your phone and remove the battery and SIM.!! (MUST DO)
5 / Connect to the PC. It is normally detected as a "Flash Loader Utility. (Still without battery and sim)
6 / Unplug the phone ( once it says installed flash utility )

7 / Place the (KS360.flb File(UnZipped)) in the disc drive C:/ Or D:/
8 / Run "KS360-Utils-EN.exe" Press: O (Backup STATIC_EEP partition...)
9 / Type: O (Backup STATIC_EEP partition...) and hit Enter
((( Enter All This WITHOUT SPACES!! )))!
10 / Type: \\.\USB1 then Press Enter (Sometimes it might not be USB1 might be 0 - 5+)
11 / Type: C:\KS360.FLB OR D:\KS360.flb(DEPENDS WHERE YOU PUT THE FILE ) PRESS ENTER
12 / Type: STATIC_EEP ( Remember Capitals or it will allways fail )!! Its not fun! trust me )
13 / Now Here is what i do differantly to what all the guides anywhere else say normally it says
press enter wait just over a second or so and plug the phone in ( Didnt work on a few pcs for me) So what i do is Plug The phone in the second the PC makes a noise to say the USB is plugged in the little " dum dum " sound i press enter then.
-----------------------------------------------------------------------
" chosen: O
DLL version: 4.4,2.0
USB (Ex: \\.\ usb1): \\.\usb1
sec file - package (Ex: c:\KS360_psi.flb): C:\KS360_O \ KS360_psi.flb
Data file: C: \ STATICEEP
Loading ...
Open port ... Connect the phone
Sending sec - Pack ...
package sent ...
reception of data in memory in progress ...
Restarting the phone ...
Restart performs ...
port firm "
------------------------------------------------------------------------

If everything went well you have two files in the root of where your
ks360 utility is one saying static_eep.big and one just saying static_eep
(Delete the static_eep.big its nto needed) place the other file static_eep
with the ks360.flb file in your disc drive.

( You can turn the phone on now with the sim card inside )

14 / Still in the program KS360 Utils en.exe , Type P ( Unlock )
15 / Type D:\STATIC_EEP or C:\STATIC_EEP ( Press enter )
16 / A 8-digit code should appear, WRITE IT DOWN OR JUST KEEP THE PROGRAM OPEN!

17 / Enter the following number (as if you were dialing a phone number): 2945#*71001#
18 / Enter the 8 digit code that you have recovered and do "OK"

Here is your LG KS360 is unlocked.

SIMPLE AS

Feel free to ask questions!

LBOZ_GSM · 05-10-2010, 15:45

YouTube - Unlock LG KS360 For Free Using USB Cable

chubbie · 05-13-2010, 23:18

Help me !!
my Lg GT365GO or maybe its just GT365 hand on AT&T logo and keep blinking.
It never boot to menu. Is there any code to format the phone.

if solution is flashing , give me flashfile links and tutorial
~~REGARDS

01-05-2010, 05:44	#1 (permalink)
liamguest Junior Member Join Date: Jan 2010 Posts: 7 Member: 1200804 Status: Offline Thanks Meter: 7	LG KS360 " Unlocking Guide" Complete! Like to add this is a copy from my forum but i thought ide put it on here. i made this guide as simple as possible.! XD enjoy. Below is a Guide on how to unlock lg ks360 I JUST TRIED THIS ON MY GIRLFRIENDS PHONE AND IT WORKS! But still im not liable for damaged if you attempt this.! AND MESS IT UP even though i have not found any reason why it would not work.! --------------------------------------------------------------------------------------------- This works without uploading anything to the phone. Just follow the instructions carefully. You will need 3 bits of software to perform the unlock - get them all now Here is how to unlock the LG KS360: You will need the following tools: DRIVER: http://www.megaupload.com/?d=CIV0LPQ2 KS 360 UTILS (ENGLISH): http://www.megaupload.com/?d=9Q5G4CT1 KS 360 UTILS (FRENCH ): http://www.megaupload.com/?d=VVI89Q3T KS360.flb: http://www.megaupload.com/?d=OPJMLSV0 Step By Step Guide ( After all files downloaded ) 1 / Uninstall all drivers and LG "LG PC Suite". ( To Do With LG Phone ) 2 / Restart the PC for the changes to take effect. 3 / Go to Install all the "SetUp" files ".exe" in the DRIVERS download you downloaded. 4 / Turn off your phone and remove the battery and SIM.!! (MUST DO) 5 / Connect to the PC. It is normally detected as a "Flash Loader Utility. (Still without battery and sim) 6 / Unplug the phone ( once it says installed flash utility ) 7 / Place the (KS360.flb File(UnZipped)) in the disc drive C:/ Or D:/ 8 / Run "KS360-Utils-EN.exe" Press: O (Backup STATIC_EEP partition...) 9 / Type: O (Backup STATIC_EEP partition...) and hit Enter ((( Enter All This WITHOUT SPACES!! )))! 10 / Type: \\.\USB1 then Press Enter (Sometimes it might not be USB1 might be 0 - 5+) 11 / Type: C:\KS360.FLB OR D:\KS360.flb(DEPENDS WHERE YOU PUT THE FILE ) PRESS ENTER 12 / Type: STATIC_EEP ( Remember Capitals or it will allways fail )!! Its not fun! trust me ) 13 / Now Here is what i do differantly to what all the guides anywhere else say normally it says press enter wait just over a second or so and plug the phone in ( Didnt work on a few pcs for me) So what i do is Plug The phone in the second the PC makes a noise to say the USB is plugged in the little " dum dum " sound i press enter then. ----------------------------------------------------------------------- " chosen: O DLL version: 4.4,2.0 USB (Ex: \\.\ usb1): \\.\usb1 sec file - package (Ex: c:\KS360_psi.flb): C:\KS360_O \ KS360_psi.flb Data file: C: \ STATICEEP Loading ... Open port ... Connect the phone Sending sec - Pack ... package sent ... reception of data in memory in progress ... Restarting the phone ... Restart performs ... port firm " ------------------------------------------------------------------------ If everything went well you have two files in the root of where your ks360 utility is one saying static_eep.big and one just saying static_eep (Delete the static_eep.big its nto needed) place the other file static_eep with the ks360.flb file in your disc drive. ( You can turn the phone on now with the sim card inside ) 14 / Still in the program KS360 Utils en.exe , Type P ( Unlock ) 15 / Type D:\STATIC_EEP or C:\STATIC_EEP ( Press enter ) 16 / A 8-digit code should appear, WRITE IT DOWN OR JUST KEEP THE PROGRAM OPEN! 17 / Enter the following number (as if you were dialing a phone number): 2945#*71001# 18 / Enter the 8 digit code that you have recovered and do "OK" Here is your LG KS360 is unlocked. SIMPLE AS Feel free to ask questions!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need to Unlock LG KS360 on Orange	cairnquay	VygisToolbox	26	04-09-2011 16:55
LG GW300 " Unlocking codes not found " !!!	swatdan	Octopus LG/Octoplus LG	2	01-10-2010 11:38
Unlock LG KS360 with cable Lg Ku311	AirSac	FuriousGold	14	11-12-2009 00:40
LG KS360 blink show KS360	GSM_N4H	FuriousGold	1	06-09-2009 14:07
LG Ks360 HOW MANY KILLED AND UNLOCKED YOU WRITE YOUR EXPRENCE	Mansoor	VygisToolbox	9	10-23-2008 06:03

01-28-2010, 13:20	#2 (permalink)
Khayyal Freak Poster Join Date: Oct 2002 Location: Egypt Age: 57 Posts: 302 Member: 17337 Status: Offline Thanks Meter: 12	when i pluged the phone without battery it just on for a second and off and it not shows in computer hardwar that is ok or what also how can i know the usb no or i have to try till i get the right one

01-28-2010, 13:36	#3 (permalink)
forgotime Junior Member Join Date: Jan 2010 Posts: 9 Member: 1219725 Status: Offline Thanks Meter: 0	Good guide, I've tried this for the gw520 but couldn't unlock it. I'm able to re-flash it using this utility but nothing else. Could it be because I'm not using the correct flb file. How do I make a flb file for the gw520? Plus the unlock code for the gw520 is 16 digits long Cheers

01-29-2010, 00:23	#4 (permalink)
forgotime Junior Member Join Date: Jan 2010 Posts: 9 Member: 1219725 Status: Offline Thanks Meter: 0	OK I was able to make a flb file specifically for the gw520 by extracting the kdz into a mdb file, then turning the mdb into its separate files. But when I went to unlock it... " chosen: O DLL version: 4.4,2.0 USB (Ex: \\.\ usb1): \\.\usb1 sec file - package (Ex: c:\KS360_psi.flb): C:\KS360_O \ KS360_psi.flb Data file: C: \ STATICEEP Loading ... Open port ... Connect the phone Sending sec - Pack ... package sent ... reception of data in memory in progress ... Restarting the phone ... Restart performs ... port firm; timed out ............. so and so Any pointers?

01-30-2010, 14:42	#5 (permalink)
BigBoy™ Junior Member Join Date: Jan 2010 Posts: 11 Member: 1223045 Status: Offline Thanks Meter: 3	Maybe you can use a kp500.flb file ?

01-30-2010, 14:57	#6 (permalink)
M4rl Junior Member Join Date: Aug 2009 Location: Pilipinas Posts: 24 Member: 1104550 Status: Offline Thanks Meter: 9	Thanks dude! Subscribing just in case I need this in the future...

02-10-2010, 22:33	#7 (permalink)
ponix No Life Poster Join Date: Feb 2006 Location: ALGERIA Posts: 984 Member: 229016 Status: Offline Sonork: 100.1590620 Thanks Meter: 130	any one can test this method???

02-14-2010, 22:42	#8 (permalink)
bazaa Junior Member Join Date: Dec 2006 Posts: 2 Member: 419720 Status: Offline Thanks Meter: 0	Yes this works 100% i have unlocked 2 lg360 phones like this I did'nt need to remove battery or sim and found my phones were not detected with battery out. You just need to watch that you type file names correctly and all should go ok . Thanks for your guide I used a different guide for my 1st phone but was a lot more of messing about.

03-06-2010, 16:20	#9 (permalink)
Smokeybabe Junior Member Join Date: Mar 2010 Posts: 1 Member: 1252707 Status: Offline Thanks Meter: 0	Not having any luck with unlocking. Please help Im so frustrated. I have followed the step by step guide exactly when i come to entering the actual ulock code i type in 2945*#71001# straight away it comes up with sim lock is not activated Please please help me. I dont know what else to do. Thanks xxx

04-03-2010, 18:33	#10 (permalink)
jalex16 Junior Member Join Date: Apr 2010 Posts: 1 Member: 1276540 Status: Offline Thanks Meter: 0	Will it work with LG GT360?

04-22-2010, 01:14	#11 (permalink)
matore Junior Member Join Date: Apr 2010 Posts: 1 Member: 1288601 Status: Offline Thanks Meter: 0	Hi! I follow all steps, but when I enter "P" and put STATIC_EEP path, it gives me a 16 digit code.....This is what I get: -92-87-86-90-85-86-82-80 . What can I do!? (Its a GT360) THANKS!

05-05-2010, 03:11	#12 (permalink)
samusprime No Life Poster Join Date: Oct 2005 Location: .:Planet Namek:. Posts: 1,121 Member: 189984 Status: Offline Thanks Meter: 112	*works on gt360?????? testing...*

05-10-2010, 15:45	#14 (permalink)
LBOZ_GSM No Life Poster Join Date: Jun 2006 Posts: 1,237 Member: 300043 Status: Offline Thanks Meter: 360	YouTube - Unlock LG KS360 For Free Using USB Cable

05-13-2010, 23:18	#15 (permalink)
chubbie No Life Poster Join Date: May 2006 Location: heLL and beY0nd Posts: 996 Member: 281801 Status: Offline Sonork: 100.1608672 Thanks Meter: 158	Help me !! my Lg GT365GO or maybe its just GT365 hand on AT&T logo and keep blinking. It never boot to menu. Is there any code to format the phone. if solution is flashing , give me flashfile links and tutorial ~~REGARDS