acura (honda) 3901-S0K-A220-M1 bin needed

[DJKrugger]

Hi guys, i have an Acura (honda) 39101-S0K-A220-M1 made by pioneer, the problem was that the set will not take the code, whe i tried to dump it (9010 read as 93c46x) it will not read nor write, seems that the chip is bad. Does anyone have a working .bin file for this set?
Thanks

[audiozone]

Hi, try this, pass in PM

Deposit Files

[vuonghungmobile]

Originally Posted by audiozone

Hi, try this, pass in PM

Deposit Files

you can always pass all know? thank advance

[shooting@orange]

Originally Posted by vuonghungmobile

you can always pass all know? thank advance

Profile incomplete... COUNTRY and CITY...

[DJKrugger]

Originally Posted by audiozone

Hi, try this, pass in PM

Deposit Files

I took a BR9010 from another set but every time i try to read it it gives me different reading , so i used a 93c46 in place with your file and it doesn't work. I'm using a willem programmer, should it read the br9010?

[shooting@orange]

Originally Posted by DJKrugger

I took a BR9010 from another set but every time i try to read it it gives me different reading , so i used a 93c46 in place with your file and it doesn't work. I'm using a willem programmer, should it read the br9010?

One maybe ROTATED while the replacement may be different..

Read with this adapter: (Available from e-Bay)

[DJKrugger]

Yes i check the datasheet before intalling it, i should say i used a L46. Now the interesting part is that i found the original problem (the original code did not work) the car has an amplifier (Bose) whenever i plugged the main plug and the amp plug the code will not work, if i just plug the main, the code works!!! after entering the code i plug the amp and Voila!! now... i still trying to program the 9010 since the L46 is conected with 8 wires "spider style"

[audiozone]

Originally Posted by DJKrugger

I took a BR9010 from another set but every time i try to read it it gives me different reading , so i used a 93c46 in place with your file and it doesn't work. I'm using a willem programmer, should it read the br9010?

I have Willem too but it was unable to read/write the BR9010, if you check in the list of supported dispositives, the BR9010 isn't in the list.
You can use a Pony-based programmer but using ICProg as software, in this program the BR9010 is in the list of supported dispositives and you can make a good read/write job connecting the BR9010 like a 93C46 rotated.

IC-Prog Prototype Programmer, programs : 12C508, 16C84, 16F84, PIC 16F877, 24C16, 24C32, 93C46, 90S1200, 59C11, 89C2051, 89S53, 250x0, PIC, AVR , 80C51 etc.

[DJKrugger]

Originally Posted by audiozone

I have Willem too but it was unable to read/write the BR9010, if you check in the list of supported dispositives, the BR9010 isn't in the list.
You can use a Pony-based programmer but using ICProg as software, in this program the BR9010 is in the list of supported dispositives and you can make a good read/write job connecting the BR9010 like a 93C46 rotated.

IC-Prog Prototype Programmer, programs : 12C508, 16C84, 16F84, PIC 16F877, 24C16, 24C32, 93C46, 90S1200, 59C11, 89C2051, 89S53, 250x0, PIC, AVR , 80C51 etc.

Now i get it! Thnks for your help guys! i will make a ICprog adapter to keep testing, i have one of those radios somewhere to try since the one with as the one with the problem is already gone. The decoding procedure is the same as other hondas?

[shooting@orange]

Originally Posted by DJKrugger

Now i get it! Thnks for your help guys! i will make a ICprog adapter to keep testing, i have one of those radios somewhere to try since the one with as the one with the problem is already gone. The decoding procedure is the same as other hondas?

A basic Pony programmer off e-Bay is only about $10... and it'll do the job...


http://forum.gsmhosting.com/vbb/5372050-post2.html