Grundig Skoda MS 402A - GSM-Forum

g1dtf · 03-09-2011, 11:37

I have a Grundig Skoda MS 402A. I have taken a dump of the EEprom and managed to find a code. However when powered up the set briefly displays Safe followed immediately by ERROR 1. Had a look in the handbook but see no mention of this error. Any info or help on clearing the error would be much appreciated.

Thanks

Andy.

locote · 03-09-2011, 15:54

Sometimes write that in the display when the info in the eeprom is bad, you have to write one good dump of the same type, good luck!!!

g1dtf · 03-09-2011, 17:04

Now solved, Found a dodgy PCB track.

03-09-2011, 11:37	#1 (permalink)
g1dtf Freak Poster Join Date: Apr 2007 Location: Rotherham, UK Posts: 228 Member: 495921 Status: Offline Thanks Meter: 15	Grundig Skoda MS 402A I have a Grundig Skoda MS 402A. I have taken a dump of the EEprom and managed to find a code. However when powered up the set briefly displays Safe followed immediately by ERROR 1. Had a look in the handbook but see no mention of this error. Any info or help on clearing the error would be much appreciated. Thanks Andy.

03-09-2011, 15:54	#2 (permalink)
locote Freak Poster Join Date: Dec 2007 Location: Paraguay - Asunción Posts: 116 Member: 645865 Status: Offline Sonork: locote Thanks Meter: 20	I think... Sometimes write that in the display when the info in the eeprom is bad, you have to write one good dump of the same type, good luck!!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ms publisher ...needed or other	boganice	Off Topic Zone	0	02-07-2002 18:50
ms tools 2000 for mitsubishi!!!	^ares^	Mitsubishi	5	09-13-2001 22:08
How can I use Dejan flasher under MS-DOS	molni	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	08-28-2001 00:33
MS Tool 2000,Serial Number	mnicola	Old Ericsson Phones & Sony Phones	0	08-02-2001 14:34
==#The Original#== G.Ms GSM Links	GM	GSM Mobile Links	0	10-11-2000 06:51

03-09-2011, 17:04	#3 (permalink)
g1dtf Freak Poster Join Date: Apr 2007 Location: Rotherham, UK Posts: 228 Member: 495921 Status: Offline Thanks Meter: 15	Now solved, Found a dodgy PCB track.