902SH JP Unlocked with Total Multiserver.. Now SIM-MEP - GSM-Forum

mikeman400 · 09-17-2007, 01:10

I unlocked my phone with Total Multiserver and now It is saying SIM-MEP... It will not let me flash the phone either, it just gave an error used the credit and took my money. I thought my cable might be the problem so I got a new one and it still refuses to work..

Here is the total Multiserver error

Quote:

Connecting to server...
Credits left: 1; Credits used: 0
Maximum available speed on serial port is: 921600 Baud.
Using maximum speed: 115200 Baud.

ﾗﾗ!!! Connect Cable to Phone and Press 'ON' button shortly !!!
Start signal received.
Phone Certificate: A1_SHARP_AS_CUSTOMER
Phone Software Color: Brown
Phone Software CID: 24
Sending FlashLoader...
Flash ID: B00B
Phone IMEI: 35025700071895 ; OTP CID: 24
Sending Loader...
Wrong gdfs answer: 15

Cable disconnected or not working properly.
Please clean phone connector surface and try again.
If the problem persists try to use other computer.
Anyway cable seems to be damaged or faulty.
Error code: 0x002F13

Saving ATS Error File: '20070914_142737140.ATS'
Saving JPG Snapshot: '20070914_142737140.JPG'
Saving TXT Log-file: '20070914_142737140.txt'

Please mail us the 3 files from Client folder to: reportfiles@gmail.com
Give us phone model, operator, country, windows version, computer CPU, etc・
NOTE: emails without JPEG snapshot + ATS files attached will be Ignored!

I've also tried setool.. Here is the error message from it.

Quote:

GUI v0.91373/UNI
standalone version engaged.
Card serial:00001283
Loaded 49 flash descriptors
Open COM port OK
ChipID:7100,EMP protocol:0301
PHONE IS BROWN
FLASH CID detected:24
Speed:115200
err: FB
loader prologue not accepted
failed to load CERTLOADERS,try to use RECOVERY.
Elapsed:4 secs.
Open COM port OK
ChipID:7100,EMP protocol:0301
PHONE IS BROWN
FLASH CID detected:24
Speed:115200
err: FF
loader prologue not accepted
failed to load CERTLOADERS,try to use RECOVERY.
Elapsed:2 secs.

SeTool is mostly saying err: FF but it changes quite a bit.

Please Help.. I'm about to just throw this phone away beacuse of the trouble I have had with it. I heard that I needed to just press # and PWR but it doesn't do anything when I do that It jsut comes on normal.

halongmobile · 09-17-2007, 02:44

Can use EGSM ?? 900Hz ??

pacisjr2 · 09-17-2007, 03:21

fullflash w/ setools bro....works for me...

mikeman400 · 09-17-2007, 08:31

Well I would just reflash the thing but for some reason I can't get it to flash.. I get the errors above. Any other ideas? Anyone in Florida with tools willing to help me out for a fee?

mikeman400 · 09-17-2007, 08:33

Quote:

Originally Posted by halongmobile

Can use EGSM ?? 900Hz ??

Sorry I don't know EGSM is it a tool? Or are you refering to Enhanced GSM or something of that nature. If thats the case I assume you mean 900MHz instead of Hz.

I'm using the TotalMultiserver self powered cable with this phone in combination with totalmultiserver. It unlocked the phone fine the first time. The phone powers on and says sim-mep. I cannot peform another unlock or flash the phone or even dump the flash.. I tried to flash the phone with totalmultiserver and also after failing to do so I tried the cracked version of SeTool. Neither would flash the phone. Just throws error codes listed above in first post. Phone still powers up but won't let me do anything via tools.

Nurettin Duman · 09-17-2007, 11:24

if you the telephone full flash machts nich again live purely mahen then dead
Large problem

mikeman400 · 09-18-2007, 02:28

Quote:

Originally Posted by Nurettin Duman

if you the telephone full flash machts nich again live purely mahen then dead
Large problem

Sorry What? I don't know any German. The phone is not dead, it powers on like it should but it is SIM-MEP Locked and won't let me flash it unless there is something I am missing. I've never worked with these type of phones before I have only unlocked Motorola phones in the past so it is very possible I am missing a step or something.

T0T0 · 09-18-2007, 08:57

you have to fullflash with euro sir version 1.44......... and use setool

mikeman400 · 09-19-2007, 06:19

I guess I should ask in the SeTool area about this error it is giving me. I only have the cracked setool 2. if I try to flash with anything it says.

Quote:

loader prologue not accepted
failed to load CERTLOADERS,try to use RECOVERY.
Elapsed:4 secs.
Open COM port OK
ChipID:7100,EMP protocol:0301
PHONE IS BROWN
FLASH CID detected:24
Speed:115200
err: FF
loader prologue not accepted
failed to load CERTLOADERS,try to use RECOVERY.
Elapsed:2 secs.

skymovefast · 09-27-2007, 17:44

Please try with hold the lower button after camera button beside the phone.

cheeseus · 09-30-2007, 14:04

Well, I think Total Multiserver stuff is scam - just takes your credit... I tried 4 times to flash my 902 with the SX813 they offer - always this crap about surface not clean or cable damaged, blah-blah. My friend who did this uses tha cable with SETool and has flashed my Sharp 902 to different versions of the FM with the same cable and it works. Unfortunately, we can't find the Chinese firmware ...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
How TO UNLOCK S-E K800 and K610 with TOTAL MULTISERVER???	Eagle7	TOTAL MultiServer	6	07-04-2007 20:43
w810i unlocking with total multiserver cable	waseem1	Sony Ericsson	1	01-21-2007 22:27
Dead k700i after flashing with Total Multiserver	devilfysh	Sony Ericsson	2	03-01-2005 12:17
Using a proxy server with Total Multiserver	Hanley	TOTAL MultiServer	3	11-30-2004 05:28
Need help with unlock k700i and t610 new version with total multiserver!	mobile_2003	TOTAL MultiServer	4	10-21-2004 13:57

09-17-2007, 02:44	#2 (permalink)
halongmobile No Life Poster Join Date: Dec 2003 Location: http://www.halong.vn/ Age: 22 Posts: 807 Member: 45580 Status: Offline Thanks: 250 Thanked 48 Times in 22 Posts	Can use EGSM ?? 900Hz ??

09-17-2007, 03:21	#3 (permalink)
pacisjr2 Major Poster Join Date: Aug 2006 Posts: 40 Member: 324674 Status: Offline Thanks: 5 Thanked 4 Times in 4 Posts	fullflash w/ setools bro....works for me...

09-17-2007, 08:31	#4 (permalink)
mikeman400 Junior Member Join Date: Aug 2007 Posts: 10 Member: 567367 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	Well I would just reflash the thing but for some reason I can't get it to flash.. I get the errors above. Any other ideas? Anyone in Florida with tools willing to help me out for a fee?

09-17-2007, 11:24	#6 (permalink)
Nurettin Duman No Life Poster Join Date: Feb 2005 Location: Turkiye :GsmdunyasıTeam® Age: 42 Posts: 2,779 Member: 115596 Status: Offline Thanks: 382 Thanked 1,087 Times in 375 Posts	if you the telephone full flash machts nich again live purely mahen then dead Large problem

09-18-2007, 08:57	#8 (permalink)
T0T0 No Life Poster Join Date: Aug 2007 Age: 31 Posts: 974 Member: 572549 Status: Offline Thanks: 650 Thanked 170 Times in 108 Posts	you have to fullflash with euro sir version 1.44......... and use setool

09-27-2007, 17:44	#10 (permalink)
skymovefast Insane Poster Join Date: May 2007 Location: indonesia Posts: 83 Member: 519175 Status: Offline Sonork: 100.1592643 Thanks: 39 Thanked 17 Times in 11 Posts	Please try with hold the lower button after camera button beside the phone.

09-30-2007, 14:04	#11 (permalink)
cheeseus Junior Member Join Date: Sep 2007 Posts: 10 Member: 590630 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	Well, I think Total Multiserver stuff is scam - just takes your credit... I tried 4 times to flash my 902 with the SX813 they offer - always this crap about surface not clean or cable damaged, blah-blah. My friend who did this uses tha cable with SETool and has flashed my Sharp 902 to different versions of the FM with the same cable and it works. Unfortunately, we can't find the Chinese firmware ...