gx15 testmode - GSM-Forum

mastermane · 08-26-2005, 12:01

hello all
i need to know how ican put gx15 in testmode to revive it aftr bad unlock
if som on know how ......??
thanks in advance

ACE_UK · 08-26-2005, 12:02

try this first if it dont work you need to reflash the phone

Remove Simcard
DO NOT TURN ON THE PHONE!
Press 0, 3, top right key and Red key all together for about 3 secs until a white display is shown.
Press 0, 1, 2, 3, top right key, 1, in sequence. The Diagnosis menu should be displayed.

Enter 99 and press the top right key. A message should be displayed saying Input Mode No:
Press 1 and then top right key. The following messages should appear:

· EE_FORMAT START
· EE_FORMAT OK
· EE_INIT(1) START
· EE_INIT(1) OK
· BBSRAM CLEAR END
· FINISHED
· PLEASE ANY KEY
Wait until all the above messages are displayed and then press the top right key.

Press the M key (very important). Message should display Diag Param Saving.

Press the red key to power down the phone
Default Phone Code is now 0000 like when the phone was new ----------------------

Platijet · 08-26-2005, 13:03

Quote:

Originally Posted by ACE_UK

try this first if it dont work you need to reflash the phone

Remove Simcard
DO NOT TURN ON THE PHONE!
Press 0, 3, top right key and Red key all together for about 3 secs until a white display is shown.
Press 0, 1, 2, 3, top right key, 1, in sequence. The Diagnosis menu should be displayed.

Enter 99 and press the top right key. A message should be displayed saying Input Mode No:
Press 1 and then top right key. The following messages should appear:

· EE_FORMAT START
· EE_FORMAT OK
· EE_INIT(1) START
· EE_INIT(1) OK
· BBSRAM CLEAR END
· FINISHED
· PLEASE ANY KEY
Wait until all the above messages are displayed and then press the top right key.

Press the M key (very important). Message should display Diag Param Saving.

Press the red key to power down the phone
Default Phone Code is now 0000 like when the phone was new ----------------------

if phone has new version of FW then only cable solution can unlock it.

mastermane · 08-26-2005, 13:16

i need solution to revive it aftr bad unlock
solution is by testmode but i dont know how "0+3+top right +rd key"dont put it in test mod what i can do
thanks in advance

Platijet · 08-26-2005, 13:19

check/measure if battery is ok(3,8V minimum),else flash your phone

mastermane · 08-26-2005, 15:18

i will try to flash it.................

miever66 · 08-29-2005, 13:16

how to reflash it? i have same roblem

08-26-2005, 12:01	#1 (permalink)
mastermane Freak Poster Join Date: Nov 2002 Location: spain Age: 44 Posts: 432 Member: 17950 Status: Offline Thanks Meter: 3	gx15 testmode hello all i need to know how ican put gx15 in testmode to revive it aftr bad unlock if som on know how ......?? thanks in advance

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
sharp gx15 dead even flashed with gx15 uppgrading tool	bismed	Sharp	4	11-03-2009 15:12
Can be Chinese GX15 updated English GX15?	2001foobar	Sharp	1	06-11-2005 19:13
Where to find flash for gx15 A07-007-0231-GX15.zip	artgsm1	Sharp	3	01-24-2005 11:14
T18 Testmode!!	RealNijntje	Old Ericsson Phones & Sony Phones	0	08-13-1999 23:16
Commands on testmode!	Victor	Old Ericsson Phones & Sony Phones	0	05-27-1999 12:25

08-26-2005, 12:02	#2 (permalink)
ACE_UK No Life Poster Join Date: Feb 2001 Location: uk Age: 52 Posts: 1,170 Member: 3267 Status: Offline Thanks Meter: 2	try this first if it dont work you need to reflash the phone Remove Simcard DO NOT TURN ON THE PHONE! Press 0, 3, top right key and Red key all together for about 3 secs until a white display is shown. Press 0, 1, 2, 3, top right key, 1, in sequence. The Diagnosis menu should be displayed. Enter 99 and press the top right key. A message should be displayed saying Input Mode No: Press 1 and then top right key. The following messages should appear: · EE_FORMAT START · EE_FORMAT OK · EE_INIT(1) START · EE_INIT(1) OK · BBSRAM CLEAR END · FINISHED · PLEASE ANY KEY Wait until all the above messages are displayed and then press the top right key. Press the M key (very important). Message should display Diag Param Saving. Press the red key to power down the phone Default Phone Code is now 0000 like when the phone was new ----------------------

08-26-2005, 13:16	#4 (permalink)
mastermane Freak Poster Join Date: Nov 2002 Location: spain Age: 44 Posts: 432 Member: 17950 Status: Offline Thanks Meter: 3	i need solution to revive it aftr bad unlock solution is by testmode but i dont know how "0+3+top right +rd key"dont put it in test mod what i can do thanks in advance

08-26-2005, 13:19	#5 (permalink)
Platijet No Life Poster Join Date: Apr 2003 Location: Greece Age: 47 Posts: 3,358 Member: 26279 Status: Offline Thanks Meter: 274	check/measure if battery is ok(3,8V minimum),else flash your phone

08-26-2005, 15:18	#6 (permalink)
mastermane Freak Poster Join Date: Nov 2002 Location: spain Age: 44 Posts: 432 Member: 17950 Status: Offline Thanks Meter: 3	i will try to flash it.................

08-29-2005, 13:16	#7 (permalink)
miever66 Freak Poster Join Date: Mar 2005 Age: 43 Posts: 253 Member: 130055 Status: Offline Thanks Meter: 1	how to reflash it? i have same roblem