sharp gxxx hend set code - GSM-Forum

nomi · 06-29-2005, 23:36

hi
i have a sharp gx10i hand set code please help me

ROBISH_GSM · 06-29-2005, 23:39

full factory reset - clears EVERYTHING

Remove SIM

1 Press 0, 3, top right key and Red key together for about 3 secs until a white display is shown.

2 Press 0, 1, 2, 3, top right key, 1, in sequence. The Diagnosis menu should be displayed.

3 Enter 99 and press the top right key. A message should be displayed saying Input Mode No:

4 Enter 1 and press the top right key. The following messages should appear:
· EE_FORMAT START
· EE_FORMAT OK
· EE_INIT(1) START
· EE_INIT(1) OK
· BBSRAM CLEAR END
· FINISHED
· PLEASE ANY KEY
5 Wait until all the above messages are displayed and then press the top right key.
6 Press the M key (very important). Message should display Diag Param Saving.
7 Press the red key to power down the phone

B.R
Robish

hamzehest · 06-30-2005, 09:56

Thank You Very Much Man
You Are The Big Master

^PAX · 07-01-2005, 13:44

for gx25 it´s the same ?

tanks

wearephones · 07-28-2005, 11:07

hi everybody
this handset code doesnt work anymore.does anyone have any idea why

damabib · 07-28-2005, 11:22

is work with some version. and not gree with some,.cos i have one myself ,did nt work ,i received 1 4rom customer .try and handset code remove.later unlock sim with free sw

brady1 · 07-29-2005, 12:11

2 Press 0, 1, 2, 3, top right key, 1, in sequence. The Diagnosis menu should be displayed.

after doing that a white screen is displayed.. -.- now what lol?

falak · 07-29-2005, 16:36

gx25 is diff this is not work on gx25.

brady1 · 07-29-2005, 17:01

do you know how i can do it then, i got it so when i turn it on 4 stars are displayed and a dim light, how do i get rid off, this ?

brady1 · 07-29-2005, 17:02

if it isnt for gx25, then how come in a diferent thread i was told to do this:

FULL factory reset - clears EVERYTHING
Remove SIM
1 Press 0, 3, top right key and Red key together for about 3 secs until a white display is shown.
2 Press 0, 1, 2, 3, top right key, 1, in sequence. The Diagnosis menu should be displayed.
3 Enter 99 and press the top right key. A message should be displayed saying Input Mode No:
4 Enter 1 and press the top right key. The following messages should appear:
· EE_FORMAT START
· EE_FORMAT OK
· EE_INIT(1) START
· EE_INIT(1) OK
· BBSRAM CLEAR END
· FINISHED
· PLEASE ANY KEY
5 Wait until all the above messages are displayed and then press the top right key.
6 Press the M key (very important). Message should display Diag Param Saving.
7 Press the red key to power down the phone

PRESS 0+3+RIGHT BOTTOM KEY + POWER KEY FOR 3 SECOND THEN PRESS 0 , 1 , 2 , 3 , right bottom key ,
1 now you're in test mode press 99 then 3 then 3 times right bottom key that's all your phone are alive

put phone in manual test mode you hold down 0 +3 + top right button + power button for 5secs and u see
blink display press 0123 and top right button and press 1 and now phone is in test mode
now FORMAT eeprom and waiting 2 min

i cant even get past 2, after pressing 0,1,2,3 and top right, it just goes to a white screen,

please can some one help me, i have a cable..

brady1 · 07-29-2005, 20:26

hmm geting some where now

brady1 · 07-29-2005, 21:35

oki when when it does it , it says press M, this is key 6 right?

halongmobile · 08-01-2005, 09:16

oh good i am tested 100%.............for gx 10,gx 10i,....gx30 all ok

nctrung_vn · 08-01-2005, 09:37

What model your hand reset code to do.
Some model can not.

I 'm have prole with model T-Mobile

Best & regards

halongmobile · 08-06-2005, 05:52

why u use SPST.......?.all ok........http://www.egsm.com.vn/support/sharp/

06-29-2005, 23:36	#1 (permalink)
nomi Freak Poster Join Date: Aug 2004 Age: 38 Posts: 292 Member: 78440 Status: Offline Thanks Meter: 56	sharp gxxx hend set code hi i have a sharp gx10i hand set code please help me

06-30-2005, 09:56	#3 (permalink)
hamzehest Insane Poster Join Date: Apr 2005 Age: 41 Posts: 90 Member: 134456 Status: Offline Thanks Meter: 9	Big Thanks For Big Master Thank You Very Much Man You Are The Big Master

07-29-2005, 17:02	#10 (permalink)
brady1 Junior Member Join Date: Jul 2005 Location: on my comp Age: 34 Posts: 28 Member: 159724 Status: Offline Thanks Meter: 0	if it isnt for gx25, then how come in a diferent thread i was told to do this: FULL factory reset - clears EVERYTHING Remove SIM 1 Press 0, 3, top right key and Red key together for about 3 secs until a white display is shown. 2 Press 0, 1, 2, 3, top right key, 1, in sequence. The Diagnosis menu should be displayed. 3 Enter 99 and press the top right key. A message should be displayed saying Input Mode No: 4 Enter 1 and press the top right key. The following messages should appear: · EE_FORMAT START · EE_FORMAT OK · EE_INIT(1) START · EE_INIT(1) OK · BBSRAM CLEAR END · FINISHED · PLEASE ANY KEY 5 Wait until all the above messages are displayed and then press the top right key. 6 Press the M key (very important). Message should display Diag Param Saving. 7 Press the red key to power down the phone PRESS 0+3+RIGHT BOTTOM KEY + POWER KEY FOR 3 SECOND THEN PRESS 0 , 1 , 2 , 3 , right bottom key , 1 now you're in test mode press 99 then 3 then 3 times right bottom key that's all your phone are alive put phone in manual test mode you hold down 0 +3 + top right button + power button for 5secs and u see blink display press 0123 and top right button and press 1 and now phone is in test mode now FORMAT eeprom and waiting 2 min i cant even get past 2, after pressing 0,1,2,3 and top right, it just goes to a white screen, please can some one help me, i have a cable.. Last edited by brady1; 07-29-2005 at 20:18.

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
sharp 904sh keypad set	gayansuranga	Wanted Products	0	04-26-2009 10:56
Sharp hand set code.... via keypad... please post results	Burnt Cobba	Sharp	66	12-24-2008 09:39
Sharp tm100 wap settings for cingular	tironsi84	Sharp	0	05-06-2005 05:22
Furious customer & Sharp GXxx Problem	KATOUE	FuriouS II	23	09-26-2004 16:37

06-29-2005, 23:39	#2 (permalink)
ROBISH_GSM Cheater -Don't Deal with him- Join Date: Mar 2004 Location: GERMANY Age: 42 Posts: 590 Member: 60523 Status: Offline Thanks Meter: 9	full factory reset - clears EVERYTHING Remove SIM 1 Press 0, 3, top right key and Red key together for about 3 secs until a white display is shown. 2 Press 0, 1, 2, 3, top right key, 1, in sequence. The Diagnosis menu should be displayed. 3 Enter 99 and press the top right key. A message should be displayed saying Input Mode No: 4 Enter 1 and press the top right key. The following messages should appear: · EE_FORMAT START · EE_FORMAT OK · EE_INIT(1) START · EE_INIT(1) OK · BBSRAM CLEAR END · FINISHED · PLEASE ANY KEY 5 Wait until all the above messages are displayed and then press the top right key. 6 Press the M key (very important). Message should display Diag Param Saving. 7 Press the red key to power down the phone B.R Robish

07-01-2005, 13:44	#4 (permalink)
^PAX Freak Poster Join Date: Sep 2004 Location: Paris Age: 47 Posts: 205 Member: 82980 Status: Offline Thanks Meter: 23	for gx25 it´s the same ? tanks

07-28-2005, 11:07	#5 (permalink)
wearephones Freak Poster Join Date: Oct 2003 Location: Bolton Age: 44 Posts: 491 Member: 41976 Status: Offline Thanks Meter: 33	hi everybody this handset code doesnt work anymore.does anyone have any idea why

07-28-2005, 11:22	#6 (permalink)
damabib No Life Poster Join Date: Jan 2005 Location: EVERYWHERE U GO Age: 46 Posts: 4,800 Member: 106026 Status: Offline Sonork: 100.77890 Thanks Meter: 127	is work with some version. and not gree with some,.cos i have one myself ,did nt work ,i received 1 4rom customer .try and handset code remove.later unlock sim with free sw

07-29-2005, 12:11	#7 (permalink)
brady1 Junior Member Join Date: Jul 2005 Location: on my comp Age: 34 Posts: 28 Member: 159724 Status: Offline Thanks Meter: 0	2 Press 0, 1, 2, 3, top right key, 1, in sequence. The Diagnosis menu should be displayed. after doing that a white screen is displayed.. -.- now what lol?

07-29-2005, 16:36	#8 (permalink)
falak No Life Poster Join Date: Jul 2004 Location: IN YOUR DREAMS Age: 41 Posts: 2,462 Member: 74749 Status: Offline Thanks Meter: 167	gx25 is diff this is not work on gx25.

07-29-2005, 17:01	#9 (permalink)
brady1 Junior Member Join Date: Jul 2005 Location: on my comp Age: 34 Posts: 28 Member: 159724 Status: Offline Thanks Meter: 0	do you know how i can do it then, i got it so when i turn it on 4 stars are displayed and a dim light, how do i get rid off, this ?

07-29-2005, 20:26	#11 (permalink)
brady1 Junior Member Join Date: Jul 2005 Location: on my comp Age: 34 Posts: 28 Member: 159724 Status: Offline Thanks Meter: 0	hmm geting some where now

07-29-2005, 21:35	#12 (permalink)
brady1 Junior Member Join Date: Jul 2005 Location: on my comp Age: 34 Posts: 28 Member: 159724 Status: Offline Thanks Meter: 0	oki when when it does it , it says press M, this is key 6 right?

08-01-2005, 09:16	#13 (permalink)
halongmobile No Life Poster Join Date: Dec 2003 Location: http://www.halong.vn/ Age: 33 Posts: 808 Member: 45580 Status: Offline Thanks Meter: 48	oh good i am tested 100%.............for gx 10,gx 10i,....gx30 all ok

08-01-2005, 09:37	#14 (permalink)
nctrung_vn No Life Poster Join Date: Apr 2005 Age: 47 Posts: 1,226 Member: 135671 Status: Offline Thanks Meter: 45	What model your hand reset code to do. Some model can not. I 'm have prole with model T-Mobile Best & regards

08-06-2005, 05:52	#15 (permalink)
halongmobile No Life Poster Join Date: Dec 2003 Location: http://www.halong.vn/ Age: 33 Posts: 808 Member: 45580 Status: Offline Thanks Meter: 48	why u use SPST.......?.all ok........http://www.egsm.com.vn/support/sharp/