I have 2 sgh 2200 asking for user code and sim lock code - GSM-Forum

surfer2go · 04-26-2002, 18:54

hi

I have 2 sgh 2200 asking for user code and sim lock code what can I do for unlock them

I have universal box from gsm technology.com with sgh unlock and sgh flasch cabel but wich software to use for unlock

can anybody help me please?

thank you

surfer2go

F C · 04-26-2002, 19:27

hi buddy--

for user code( phone code)

press------*2767*2878# without sim card==

for sim lock code-- i hope u have to flash the phone-- or use ur concerned box for that--

best regards
gohar

surfer2go · 04-27-2002, 04:02

hi friend

thanks for replying.

Which software to use for flashing the Phone

P.S. I don´t care about imei

greetz

surfer2go

BufferMess · 04-27-2002, 14:45

Flashing 2200 for sim lock??? Amazing!!! I have never heard of such solution!!!

Have you tried reading eeprom and using soft from pajo?

BufferMess

surfer2go · 04-27-2002, 21:42

yes I did

I have tried to read the eeprom with the I2c interface from www.gsm-free.com but I can´t read it out with other eeproms (like 3210 5110) no problems to read but samsung impossible for me I use pony prog 2000

Why gsm-technology sells fasch and unlock cabel when there isn´t any soft to use with this cables???

surfer2go

kazak · 04-27-2002, 21:59

Pajo soft can unlock 2100 , 2400 , R2XX , Axx but not SGH2200 , and you can not type #0111*code# ,
How do you unlock 2200.I've desoldered the 24C128 read out the bin's. I'm not sure about Zinnat soft ,
& desoldering /resoldering is very hard.
Can somebody advise me ?

sat · 04-27-2002, 23:04

there is no eeprom unlocker for 2200 available, as I know...
gsm-technology's cables is useless for 2200 and other samsungs.
Pajo's soft for unlocking 2100 and 2400 is notworking for the 2200. The only method to unlock them is flashing. I heard it from reliable source, and i'm afraid that it's true...

Paulic [WbC] · 04-28-2002, 00:55

For SIM-Lock (SP-Lock)..

Desolder the 24c128 and read 'em out. Fill the area 0FC0 - 101F with 00, and the phone is unlocked

For Phone-Lock-Code..

address:
07BF: 31 32 33 34 = phone-code: 1 2 3 4 ... check 'em out, or edit your own code.

--> some infos & the *.bin-files --> download

kazak · 04-28-2002, 23:37

I tested your solution on a SGH2200 , but the result is " searching for emergency coverage" , I can't go into the men
I used the menu FILL in pony , then start adress 0x0FC0 , end adress 0x101F , value 0x00.
Read & writing good with WinXP , userport enabled

markaba · 05-01-2002, 08:37

Hi!
to remove simlock code for sgh2200:free2000 by lovelas...eeprom unlocker
phone code:0007B9-0007BC
easy solution:clone ur phone
Regards!

kazak · 05-05-2002, 04:42

Markaba is right , cloning work well , tested on a SGH2200.

sat · 05-07-2002, 02:02

you mean just write eeprom dump from another 2200?

HFP · 05-07-2002, 02:39

Offcource-8)))
WBR.
Peter

aLeN27 · 05-07-2002, 08:23

hey man,never use a software without taking a backup.

sat · 05-08-2002, 00:49

SP lock is cleared with lovelas soft.
phonecode can be read with hex editor on above mentioned ad*******..
no need to clone

04-26-2002, 18:54	#1 (permalink)
surfer2go Freak Poster Join Date: May 2001 Posts: 334 Member: 4615 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	I have 2 sgh 2200 asking for user code and sim lock code hi I have 2 sgh 2200 asking for user code and sim lock code what can I do for unlock them I have universal box from gsm technology.com with sgh unlock and sgh flasch cabel but wich software to use for unlock can anybody help me please? thank you surfer2go

04-28-2002, 00:55	#8 (permalink)
Paulic [WbC] Crazy Poster Join Date: Nov 2000 Location: Germany Posts: 57 Member: 2575 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	For SIM-Lock (SP-Lock).. Desolder the 24c128 and read 'em out. Fill the area 0FC0 - 101F with 00, and the phone is unlocked For Phone-Lock-Code.. address: 07BF: 31 32 33 34 = phone-code: 1 2 3 4 ... check 'em out, or edit your own code. --> some infos & the .bin-files --> download Last edited by Paulic [WbC]; 04-28-2002 at 01:01.*

05-01-2002, 08:37	#10 (permalink)
markaba Freak Poster Join Date: Oct 2000 Location: CI Age: 33 Posts: 348 Member: 2246 Status: Offline Thanks: 7 Thanked 11 Times in 8 Posts	Hi! to remove simlock code for sgh2200:free2000 by lovelas...eeprom unlocker phone code:0007B9-0007BC easy solution:clone ur phone Regards! Last edited by markaba; 05-01-2002 at 08:43.

05-07-2002, 08:23	#14 (permalink)
aLeN27 Freak Poster Join Date: Mar 2002 Location: TURKEY Age: 38 Posts: 161 Member: 10448 Status: Offline Thanks: 2 Thanked 0 Times in 0 Posts	hmmm. hey man,never use a software without taking a backup.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-26-2002, 19:27	#2 (permalink)
F C No Life Poster Join Date: Sep 2001 Location: 5.12.14 Posts: 2,218 Member: 6486 Status: Offline Sonork: 100.79846 Thanks: 50 Thanked 329 Times in 123 Posts	hi buddy-- for user code( phone code) press------27672878# without sim card== for sim lock code-- i hope u have to flash the phone-- or use ur concerned box for that-- best regards gohar

04-27-2002, 04:02	#3 (permalink)
surfer2go Freak Poster Join Date: May 2001 Posts: 334 Member: 4615 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	hi friend thanks for replying. Which software to use for flashing the Phone P.S. I don´t care about imei greetz surfer2go

04-27-2002, 14:45	#4 (permalink)
BufferMess No Life Poster Join Date: Mar 2002 Location: Karabakh - Azeris motherland Age: 34 Posts: 817 Member: 9856 Status: Offline Thanks: 0 Thanked 2 Times in 2 Posts	Flashing 2200 for sim lock??? Amazing!!! I have never heard of such solution!!! Have you tried reading eeprom and using soft from pajo? BufferMess

04-27-2002, 21:42	#5 (permalink)
surfer2go Freak Poster Join Date: May 2001 Posts: 334 Member: 4615 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	yes I did I have tried to read the eeprom with the I2c interface from www.gsm-free.com but I can´t read it out with other eeproms (like 3210 5110) no problems to read but samsung impossible for me I use pony prog 2000 Why gsm-technology sells fasch and unlock cabel when there isn´t any soft to use with this cables??? surfer2go

04-27-2002, 21:59	#6 (permalink)
kazak Freak Poster Join Date: Dec 2001 Location: Burkina Faso Posts: 269 Member: 7843 Status: Offline Thanks: 0 Thanked 1 Time in 1 Post	Pajo soft can unlock 2100 , 2400 , R2XX , Axx but not SGH2200 , and you can not type #0111*code# , How do you unlock 2200.I've desoldered the 24C128 read out the bin's. I'm not sure about Zinnat soft , & desoldering /resoldering is very hard. Can somebody advise me ?

04-27-2002, 23:04	#7 (permalink)
sat Freak Poster Join Date: Aug 2001 Location: GSMLAND Posts: 479 Member: 5764 Status: Offline Thanks: 0 Thanked 2 Times in 2 Posts	there is no eeprom unlocker for 2200 available, as I know... gsm-technology's cables is useless for 2200 and other samsungs. Pajo's soft for unlocking 2100 and 2400 is notworking for the 2200. The only method to unlock them is flashing. I heard it from reliable source, and i'm afraid that it's true...

04-28-2002, 23:37	#9 (permalink)
kazak Freak Poster Join Date: Dec 2001 Location: Burkina Faso Posts: 269 Member: 7843 Status: Offline Thanks: 0 Thanked 1 Time in 1 Post	I tested your solution on a SGH2200 , but the result is " searching for emergency coverage" , I can't go into the men I used the menu FILL in pony , then start adress 0x0FC0 , end adress 0x101F , value 0x00. Read & writing good with WinXP , userport enabled

05-05-2002, 04:42	#11 (permalink)
kazak Freak Poster Join Date: Dec 2001 Location: Burkina Faso Posts: 269 Member: 7843 Status: Offline Thanks: 0 Thanked 1 Time in 1 Post	Markaba is right , cloning work well , tested on a SGH2200.

05-07-2002, 02:02	#12 (permalink)
sat Freak Poster Join Date: Aug 2001 Location: GSMLAND Posts: 479 Member: 5764 Status: Offline Thanks: 0 Thanked 2 Times in 2 Posts	you mean just write eeprom dump from another 2200?

05-07-2002, 02:39	#13 (permalink)
HFP No Life Poster Join Date: Mar 2001 Location: Ukraine,Kiev Age: 37 Posts: 1,608 Member: 3529 Status: Offline Thanks: 0 Thanked 1 Time in 1 Post	Offcource-8))) WBR. Peter

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Samsung SGH i600 security code and sim lock!!!!!	svchost	UST Pro II	11	10-28-2010 12:30
twister acess asking for user name and password	CURACAO	Twisterflasher	15	08-16-2007 20:56
SST asking for user name and Password	batunde	Siemens-Benq RingTones and WallPapers	10	05-20-2005 18:25

05-08-2002, 00:49	#15 (permalink)
sat Freak Poster Join Date: Aug 2001 Location: GSMLAND Posts: 479 Member: 5764 Status: Offline Thanks: 0 Thanked 2 Times in 2 Posts	SP lock is cleared with lovelas soft. phonecode can be read with hex editor on above mentioned ad*******.. no need to clone