Samsung x495 unlock - GSM-Forum

dave85 · 07-11-2007, 16:50

hi, i have serious problem i cant unlock this phone with lucifer and usb smart with lucifer say no phone detected and with usb smart say communication error, i have a usb cable with prolific usb to com driver, what is my problem? please i need to unlock it.... thanks

Tomba · 07-14-2007, 19:04

hi, use com cable E700 and for example "New Cerberos 1.4 fixed" program to read unlock code

dave85 · 07-14-2007, 23:28

yes i use a com cable e700 without 9v battery, and with new cerberos 1.4 fixed and a lot of different program and dont work

Tomba · 07-17-2007, 18:32

hi, I used it with 9v battery and works

mrfixit · 07-20-2007, 13:18

do code solution, no cables needed

put in wrong card then
*2767*3855# wait 60 sec for restart phone
*7465625*638*00000000*00000000#
#7465625*638*00000000#

kashi4gul · 07-20-2007, 13:36

Quote:

Originally Posted by mrfixit

do code solution, no cables needed

put in wrong card then
*2767*3855# wait 60 sec for restart phone
*7465625*638*00000000*00000000#
#7465625*638*00000000#

yes that is the right

method,

get the code from READ INFO and then apply
with given below method:
#7465625*638*write get code#

rajtelecom · 10-06-2007, 16:50

Quote:

Originally Posted by mrfixit

do code solution, no cables needed

put in wrong card then
*2767*3855# wait 60 sec for restart phone
*7465625*638*00000000*00000000#
#7465625*638*00000000#

it's right solutions

.::ricky rayya::. · 10-06-2007, 17:18

i check it its 100% good solution for unlocking without any box or cable

saulmontes · 01-21-2008, 21:03

work's fine on x497 tanks again

Originally Posted by mrfixit http://forum.gsmhosting.com/vbb/imag...s/viewpost.gif
do code solution, no cables needed

put in wrong card then
*2767*3855# wait 60 sec for restart phone
*7465625*638*00000000*00000000#
#7465625*638*00000000#

freaking · 01-27-2008, 09:55

I have this phone from Fido Canada...
Need to unlock...
But i can't put any code.. because after booting with a wrong sim.. It says.. SP LOCK.. ENTER PASSWORD...
So i cannot proceed with unlocking..
How do i remove SP LOCK...
And use these codes... ?

Thanks

mrfixit · 01-28-2008, 00:46

put in simcard half way
connect battery not all the way in, leave space but make sure battery connect to phone.
turn on phone, after on and "insert sim" use thin screwdriver and push sim all the way in, still saying "insert sim"
then push battery all the way in, make sure phone not get off.
then enter reset code then other codes as mentioned b4, good luck

07-11-2007, 16:50	#1 (permalink)
dave85 Junior Member Join Date: Jul 2007 Posts: 15 Member: 542657 Status: Offline Thanks Meter: 1	Samsung x495 unlock hi, i have serious problem i cant unlock this phone with lucifer and usb smart with lucifer say no phone detected and with usb smart say communication error, i have a usb cable with prolific usb to com driver, what is my problem? please i need to unlock it.... thanks

01-21-2008, 21:03	#9 (permalink)
saulmontes Junior Member Join Date: Apr 2006 Posts: 1 Member: 258492 Status: Offline Thanks Meter: 0	tank,s work's fine on x497 tanks again Originally Posted by mrfixit http://forum.gsmhosting.com/vbb/imag...s/viewpost.gif do code solution, no cables needed put in wrong card then 27673855# wait 60 sec for restart phone 74656256380000000000000000# #746562563800000000#

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
samsung x495 unlock help	aclgsm1	SYSOL Platform	3	01-02-2009 14:08
Samsung X495 Unlocking Is Done But I See Limited Service (no Signals)	razisamb	NSPRO	6	04-15-2008 20:39
samsung x495 unlock urgent	shreecell	Samsung Flashers, Software, Firmware.	1	12-03-2007 05:07
Samsung x495 - unlock it please.	dNb_101	Samsung Flashers, Software, Firmware.	1	08-07-2006 09:23
samsung x495 unlock help	ataberk	SYSOL Platform	21	12-15-2005 01:09

07-14-2007, 19:04	#2 (permalink)
Tomba Junior Member Join Date: Dec 2002 Location: Poland Posts: 10 Member: 19303 Status: Offline Thanks Meter: 0	hi, use com cable E700 and for example "New Cerberos 1.4 fixed" program to read unlock code

07-14-2007, 23:28	#3 (permalink)
dave85 Junior Member Join Date: Jul 2007 Posts: 15 Member: 542657 Status: Offline Thanks Meter: 1	yes i use a com cable e700 without 9v battery, and with new cerberos 1.4 fixed and a lot of different program and dont work

07-17-2007, 18:32	#4 (permalink)
Tomba Junior Member Join Date: Dec 2002 Location: Poland Posts: 10 Member: 19303 Status: Offline Thanks Meter: 0	hi, I used it with 9v battery and works

07-20-2007, 13:18	#5 (permalink)
mrfixit No Life Poster Join Date: Apr 2004 Location: MOON Posts: 5,858 Member: 60899 Status: Offline Thanks Meter: 792	do code solution, no cables needed put in wrong card then 27673855# wait 60 sec for restart phone 74656256380000000000000000# #746562563800000000#

10-06-2007, 17:18	#8 (permalink)
.::ricky rayya::. Freak Poster Join Date: Apr 2006 Location: india Posts: 415 Member: 254397 Status: Offline Thanks Meter: 224	i check it its 100% good solution for unlocking without any box or cable

01-27-2008, 09:55	#10 (permalink)
freaking Junior Member Join Date: Dec 2007 Posts: 6 Member: 642438 Status: Offline Thanks Meter: 0	I have this phone from Fido Canada... Need to unlock... But i can't put any code.. because after booting with a wrong sim.. It says.. SP LOCK.. ENTER PASSWORD... So i cannot proceed with unlocking.. How do i remove SP LOCK... And use these codes... ? Thanks

01-28-2008, 00:46	#11 (permalink)
mrfixit No Life Poster Join Date: Apr 2004 Location: MOON Posts: 5,858 Member: 60899 Status: Offline Thanks Meter: 792	put in simcard half way connect battery not all the way in, leave space but make sure battery connect to phone. turn on phone, after on and "insert sim" use thin screwdriver and push sim all the way in, still saying "insert sim" then push battery all the way in, make sure phone not get off. then enter reset code then other codes as mentioned b4, good luck