All Samsung Update Firmware News Here

[Parvez.Alom+H]

All Samsung Update Firmware
News Here

By,

Ma Telecom(Parvez.Alom)

[Parvez.Alom+H]

Firmware Update Steps:

1. Run Samsung I9003 Galaxy SL Downloader.
2. Check Re-Partition, Auto Reboot and F. Reset Time.
3. Click PIT button and select this file:latona_20110114.pit
4. Put your phone into download mode: Press Volume down + OK + Power.
5. Connect USB cable and the program will detect the phone's Com number.
6. Click Start button to download the PIT file to phone.
7. After it is Done Click on Reset button, then unselect Re-Partition box.
8. Click PDA button and select this file: I9003xxxxx-xxx...-PDA-low-CL890053.tar.md5
9. Click PHONE button and select this file: MODEM_I9003xxxxx_REV_00_CL889972.tar.md5
10. Click CSC button and select this file: GT-I9003-CSC-xxxxxx.tar.md5
11. Remove the battery, then enter Device into Download Mode again.
12. Click Start button to flash these files to phone.
13. Do not touch anything till you see PASS on the program window.
14. Do full reset by this Code: *2767*3855**.

Android 2.2.1: I9003XXKA7 - I9003XXKA9 - I9000XXKB1 - I9003XXKB1-CSC DBTKB2 - I9003XXKB3 - I9003JPKD1 - I9003JPKE1 - I9003XEKE1-UCL - I9003ZCKE1-OZH - I9003DXKF1-OLB - I9003XWKB6-PLS

Android 2.3.4: I9003XXKP7-OXA - I9003XXKP9-OXA - I9003XXKPE-OXA - I9003XXKPH-SER - I9003JPKP5

Android 2.3.5: I9003XXKPM-SER - I9003XXKPN-SER - I9003DXKP9-OLBKP7 XME - I9003ZCKP9-OZH CHNI9003ZHKPD-ZZHKP9 TGY - I9003XIKP2-ITVKP4 Italy - I9003XWKPG-DBT - I9003JPKPA-OJPKP7 - I9003ZFKPG-FETKPA Taiwan

Android 2.3.6: I9003JPKPE - I9003JPKPH - I9003JVKPB-OJVKP7 TUR - I9003JVKPE - I9003XXKPQ-SER - I9003XXKPU-SER - I9003DDKP2-ODD - I9003DDKP3 - I9003BGKP7-XECKP6

[Parvez.Alom+H]

Firmware Update Guide:

1. Run Samsung I5500 Galaxy 5 Downloader.
2. Change Reset Time to 30 Sec.
3. Make sure these options is checked: Auto Reboot, Protect OPS.
4. Click OPS button and select: EUROPA_v1.0.ops
5. Click BOOT button and select:I5500xxxxx_BOOTLOADER.tar.md5
6. Click Phone button and select: I5500xxxxx_amss_phone_CL462981.tar.md5
7. Click PDA button and select: I5500xxxxx_PDA_CL537635.tar.md5
8. Click CSC button and Select: I5500Oxxxxx_CSC_Oxx_CL537635.tar.md5
9. Put the phone into Download Mode ( Press Volume Down + OK Key + Power button.
10. Connect USB cable to phone and PC and make sure the program detect it.
11. Click Start button to begin updating the phone.
12. Do nothing till all is done and you can see PASS word on the program window.
13. Do Full reset by this Code *2767*3855**.

I5500 Galaxy 5 / Galaxy 550

Android 2.1:I5500XWJK3 - I5500XXJF1 - I5500XWJH4-OXAJH3 - I5500XWJK3-CSC-SERJK1 complete - I5500XWJI1 - I5500XXJED - I5500XXJEB - I5500XWJI2-SER - I5500XWJH4-SER - I5500XWJG9

Android 2.2:I5500XFJPK - I5500XWJP9 - I5500XWJPB - I5500XWJPL - I5500XWJJ6 - I5500XFJPP - I5500XWJPJ - I5500XFJPQ - I5500XWJQ3-NEE - I5500XWJQ3-XXJPF TPH - I5500XFJPZ-OXF CNX - I5500XXKJ3-TIM - I5500XWJPQ-O2U - I5500XFJPZ-VDC

[Parvez.Alom+H]

Firmware Flashing Steps:

1. Run Samsung E1252 Downloader.
2. From Serial Port section select Com and Speed.
3. Now from Files to Download section check : BIN + TFS option.
4. Click on BIN button and select this file: E1252xxxxx_BIN.cla
5. Click on TFS button and select this file: E1252xxxxx_TFS.tfs
6. Check this option: With common CSC.
7. Check this option: power - ON after download.
8. Click on CSC button and select this file: E1252Oxxxxx_CSC.csc
9. Click START button and connect cable to phone.
10. Press END key on the phone till the program tells you: Now you can do DOWNLOAD.
11. Press DOWNLOAD button to start the process.
12. Do nothing till all is DONE.
13. turn on the phone and Do Full reset by this code: *2767*3855**.

E1252

E1252JPJK1 - E1252XEKD1 - E1252XEJI1 - E1252XEJI2

[Parvez.Alom+H]

Firmware Update Steps:

1. Run Samsung I9020 Google Nexus S Downloader.
2. Put the phone into Download Mode: Press Middle of Volume Key and Connect USB cable.
3. You can see ( Downloading...) on the phone LCD.
4. The program must read the Com number it takes.
5. Click BOOT button and select:Bootloader_I9020xxxxx.tar.md5
6. Click Phone button and select: MODEM_I9020xxxxx_REV_00_CL912571_SIGNED.tar.md5
7. Click PDA button and select: PDA_SOJU_xxxx.....tar.md5
8. Click CSC button and select: DGS_I9020_EUR.tar
9. Click Start button and the update process will start.
10. Do not touch or remove anything till the device rebooted and you can see [COLOR=**339966]PASS[/COLOR] word on the program.

Firmware: I9020-GRH78-XXJK1

[Parvez.Alom+H]

Firmware Update Steps:

1. Run Samsung I9100 Galaxy S II Downloader.
2. Check These options: Re-Partition , Auto Reboot , F.Reset Time.
3. Click PIT button and select: u1_02_20110310_emmc_EXT4.pit
4. Click PDA button and select: CODE_I9100xxxxx_CL161513_REV02_user_low_ship.tar.m d5
5. Click PHONE button and select: MODEM_I9100xxxxx_REV_02_CL995882.tar.md5
6. Click CSC button and select: GT-I9100-MULTI-CSC-Oxxxxx.tar.md5
7. Put phone into Download mode: ( Press Volume Down + OK + Power ).
8. Connect Cable to phone and PC.
9. Make sure that the program detect the phone.
10. Click Start button and wait the program to finish downloading the firmware files to phone.
11. After phone reboot Do full reset by this Code *2767*3855**

Android 2.3.3: I9100XEKDB - I9100XWKDD - I9100XWKDF - I9100XEKE1 - I9100XEKE2 - I9100XWKE1-OXX - I9100XWKE1-OXE - I9100XWKE1 - I9100XWKE2-OXF - I9100XWKE7-OXE - I9100BOKE3 - I9100XXKE4-OXA - I9100XXKF2-OXA - I9100XWKF3-OJV - I9100XWKG1-OJV - I9100UHKE1-CHE - I9100XWKF1 - I9100XWKE8-ODD - I9100XWKF3-KCL - I9100XWKF1-OLB-DX - I9100DXKF1-OLB - I9100DXKI2-OLB - I9100 Arabic JPKF1 Custom - I9100JPKF3 - I9100JPKG2 - I9100JPKH1 - I9100JHKG2 - I9100BGKF3 - I9100XWKG1-MOTKF1 - I9100XWKF3-BOGKD3 - I9100BUKG2-VD2 - I9100BUKG2-CNX - I9100BUKG2-VOD - I9100XWKG3-VNZ - I9100XWKF3-KPN - I9100ZSKF1 - I9100ZSKF4 - I9100ZSKG2-OZSKG2

Android 2.3.4: I9100XXKG1-OXA - I9100XXKG2-OXA - I9100XXKG3-OXA - I9100XXKG5-OXA - I9100XXKG6-OXA - I9100XXKH1-OXA - I9100XXKH3-OXA - I9100UHKG7-UUB - I9100ZNKG5-ZHKG5 - I9100ZCKH1-ZHK - I9100ZCKH2-ZHK - I9100ZCKI2-OZH - I9100JPKI1 - I9100DXKH2-OLB - I9100XWKI4-OXX - I9100XWKI4-DBT - I9100XWKI4-TEN - I9100CEKI2-XEN - I9100XWKI4-OXE : Link1 - Link2 - I9100UHKI1-ZTO - I9100XWKI4-OXF

Android 2.3.5: I9100XXKI3-OXA - I9100XWKI8-OXX - I9100XWKI8-TEN - I9100ZSKI3-OZS - I9100BOKJ2-TNL - I9100XWKI8-WIN - I9100XWKI8-3IE - I9100JPKJ2 - I9100XWKJ1-OJV - I9100XWKI8-OXE - I9100XWKJ1-LUX - I9100BUKJ3-VD2 - I9100BUKJ3-ATL - I9100BVKJ4-ORA - I9100BVKJ4-AMN - I9100ZCKJ1-OZH - I9100BOKK1-TMU - I9100XWKI8-OXXKI2 NEE

Android 2.3.6: I9100UMKK1-TCE - I9100XWKK2-XENKJ1 - I9100XXKL1-OXA - I9100XWKK5-MOT - I9100XIKK1-OXIKK1 ITV Italy - I9100XILA2-OXI ITV Italy - I9100XILA3-OXIKK1 ITV Italy - I9100UHLA2-CHLLA1 - I9100XWLA4-MOTLA1 - I9100XWKK2-OJVKK1 - I9100XWLA4-DBTKH1 - I9100BVKL1-IDE - I9100XWLA4-EPLKL1 Germany - I9100UHLB2-ZTO Brazil - I9100XWLA3-FRELA1 - I9100XWKK2-XSAKK1 Australia

Android 4.0.1: I9100XXKP1 Custom - I9100XXKP2 Custom - I9100XXKP4-OXA

Android 4.0.3: I9100XXKP8-OXA - I9100XXKPA-OXA - I9100XXLP1-OXA - I9100XXLP2-OXA - I9100XXLP6-OXXLP3 - I9100XXLPB-OXXLP5 - I9100XXLPH-OXA - I9100XXLPJ-OXA - I9100XXLPQ-OXXLPD XEH Hungary - I9100XXLPQ-OXXLPD SEB Baltic - I9100XXLPQ-OXXLPD NEE Nordic - I9100XXLPQ-OXALPQ XEO Poland - I9100UHLPE-UUB TTT - I9100ZSLPE-OZS Hong Kong - I9100DXLP7-OLB XSE - I9100XXLPQ-HTDLP3 Denmark - I9100XXLPQ-HTSLP3 Sweden - I9100XXLPQ-ODD

[Parvez.Alom+H]

Full Update Steps:

1. Run Samsung M3200 Beat S Downloader.
2. From Serial Port Section select Com number and Speed.
3. Check This option: BIN + TFS
4. Click BIN... button and select : M3200xxxxx.cla
5. Click TFS... button and select: M3200xxxxx.tfs
6. Click START button and connect cable to phone with battery.
7. After the program detect the phone you can press DOWNLOAD button.
8. The flashing process will start to upload these files into your phone.
9. Wait till all is done then disconnect the phone.
10. Turn On the phone and do full reset: *2767*3855**

Flash File :

M3200JVIF2 - M3200JVIG3 - M3200XAIC1 - M3200XCIC1 - M3200XFHK4 - M3200POHK1 - M3200JCHJ1 - M3200BXIC1 - M3200BXHK1 - M3200BDHK1 - M3200AYHJ3

[Parvez.Alom+H]

Full Update Steps:

1. Install Samsung S8500 Wave USB Drivers and Restart PC.
2. Run Samsung S8500 Downloader and Select : LSI6410
3. In case you need to flash Boot files then check this option: Full Download.
4. Click Boot button and select the boot files folder.
5. Click Amss and select: amss.bin
6. Click Apps and select: apps_compressed.bin
7. Click Rsrc1 and select: Rsrc_S8500_Open_Europe_Common.rc1
8. Click Rsrc2 and select: Rsrc2_S8500_Open_Euro_Common_(Low).rc2
9. Click Factory FS and select: FactoryFs_S8500_Open_Europe_Common_JF8.ffs
10. Click CSC and select: CSC_S8500_Open_Europe_Common_Oxx_xxxxx.csc
11. Click SHP APP and select: ShpApp.app
12. Put the phone into Download Mode: Press Volume Down + Lock Key + Power.
13. Connect USB cable to Phone and Click Port Search to check good connection.
14. Click Download to start the update process.
15. Wait till the process done and the phone restart by itself.
16. Do full reset : *2767*3855**

Flash File:

S8500XXJF8-OXA - S8500XXJH3 - S8500XXJID-OXA

S8500XXJL2 - S8500XXJK1 - S8500XXKF2-OXA - S8500XXKF3-OXA - S8500XXKK7-OXA DBT

S8500XEKA1 - S8500XEKC1 - S8500XEKC2 - S8500XEKH2-CIS

S8500JPJK1 - S8500JPKC1 - S8500JPKC1 Full - S8500JPKE1 - S8500JPKG1

S8500XIKA1 Italy - S8500JVKC1

S8500PMJE2 - S8500PMKE2-PRT - S8500PMKL2-PRT

S8500DDKD1 - S8500DDJE7

S8500DXJEA - S8500DXJL3

S8500XPKG5-OXA - S8500XPKG6-OXA - S8500XPKG7-OXA - S8500XPKH1-OXA - S8500XPKH2-OXA - S8500XPKH3-OXA - S8500XPKJ1-OXA

S8500XXLA1-O2C - S8500XXLA1-OXD VDC - S8500XXLA1-OXF CMF - S8500XXLA1-OXF CRG - S8500XXLA1-OXF MBM

S8500XXLA1-OXF MSR - S8500XXLA1-OXF SMO - S8500XXLA1-OXF TSR - S8500XXLA1-OXG MOZ

S8500XXLA1-OXG PHB - S8500XXLA1-OXG PRO - S8500XXLA1-OXG XEB - S8500XXLA1-OXX ORC

S8500XXLA1-OXCLA2 FOP - S8500XXLA1-OXFLA2 SEB - S8500XXLA1-WINLA1

S8500XXLA1-ITV Italy - S8500AELB1-SFRLB1 France - S8500XXLB2-KPN - S8500XXLB2-XEN

S8500BWJH1-VIAJH1 O2 - S8500BWKB1- S8500BVLA1-ONE - S8500BVLA1-AMNLA2 Spain

S8500BVLA1-IDE Poland - S8500XXLA1-OXFLA2 VVT Bulgaria

S8500BUKD1 - S8500BUKE1-VodafoneLite - S8500BULB1-VFGLB1 - S8500BULA3-VFGLA5 VGR Greece

S8500ACKD1 - S8500ACLA3-VOD UK Vodafone - S8500AEKD1 - S8500MBUKI1-MVFGKI1 Vodafone Lite - S8500BOJE7

S8500CXKG1-PLS - S8500CXKG1-PLS FULL - S8500BRKE2-ERA - S8500XXKL1-PLS

S8500ZUJG1 - S8500ZSKA2 - S8500ZNJI3 - S8500ZHJE7

S8500ZCJI3 - S8500ZCLB4 China

[anis_rainbow]

server not found............................................. .

[rabirabi]

all links dead................

[essamir82]

hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh

[greatphones]

can u get ics for p1000

[gsm_unlocker23]

flasher & flash file need

[jhoper_29]

this is great more update to come ..tnx

[..::One-Man::..]

brother all link not work .
no need it share . better share tested solution .{example - update,unlock hard reset etc done solution .




Every body check here about Samsung mobile .

• ************** | Everything for your Samsung Mobile | SamMobile
• ****************
• Information 4 All

@zimbahar