GT-i9505 stuck on logo with recovery booting - GSM-Forum

mobilfix · 04-02-2014, 15:20

i have there one samsung i9505 nd i flash near about 10 time in odin flashing is all done but after restart its stuck on samsung logo and in corner recovery booting if somebody have solution just post here thanx

mobilfix · 04-03-2014, 13:55

i think no body have solution

niflas · 04-04-2014, 17:58

I also have 2 pcs same problem. I tried everything in software n repaired boot with riff box but every thing success but same issue. I am going to try hardware n reply

niflas · 04-05-2014, 18:37

I made 2 units in hardware 10000% success. Don't wast time is software

senses · 04-05-2014, 23:45

What is the solution for it?
Hardware what?

alextp87 · 04-06-2014, 06:29

small tips:
check volume + button... try to desolder it.
if your phone will power up normally you must replace the switch.

niflas · 04-07-2014, 05:23

Heat this red marked aria then phone will start normaly after that flash the phone with 4.4.2. using odin. after software done imei will be blank then rebuild imei number. now job is done

mobilfix · 04-07-2014, 12:14

i have extra mother board demo unit and i take same ic from demo unit and put it on stuck recovery mode mobiler now the phone is dead

niflas · 04-09-2014, 04:56

I made 2 phones both are working perfectly

mrrobin · 04-09-2014, 05:16

Quote:

Originally Posted by mobilfix

i have there one samsung i9505 nd i flash near about 10 time in odin flashing is all done but after restart its stuck on samsung logo and in corner recovery booting if somebody have solution just post here thanx

flash with 4.4.2 firmware,last time i face this problem after done

riaz · 05-04-2014, 13:51

19505 vibrates and restarts every sec
flased different files of ver 4.4.2
even tried 4 files firmware with pit .

Able to enter recovery and download mode

details in download mode
Product code:GT-I9505
current binary:Samsung official
system status:Custom
Knox Kernel Lock:0x0
Knox warranty Void:0x1
CSB-CONFIG-LSB:0x30
Write Protection: Enable
eMMC burst mode:enabled

any suggestions
Regards
Riaz

riaz · 05-04-2014, 17:25

Problem solved
It was power switch problem
Regards
Riaz

Hussain_Mobile · 05-04-2014, 20:22

1 check battery

2 power swtich

3 try to flash on 4.4

in last check on hardware

Enjoy

sidah_gsm · 05-21-2014, 16:19

i have sam probleme i n my i9505
in download mode
Product code:GT-I9505
current binary:Samsung official
system status:Custom
Knox Kernel Lock:0x0
Knox warranty Void:0x1
CSB-CONFIG-LSB:0x30
Write Protection: Enable
eMMC burst mode:enabled

pls how solvet it

huzein · 08-06-2014, 16:03

Quote:

Originally Posted by ddjadav

Thankyou very much
it works like charm

How is the procedure?
First heat, then reassemble phone, then insert battery and turn on the phone?

br

04-02-2014, 15:20	#1 (permalink)
mobilfix Junior Member Join Date: Feb 2014 Posts: 7 Member: 2123431 Status: Offline Thanks Meter: 1	GT-i9505 stuck on logo with recovery booting i have there one samsung i9505 nd i flash near about 10 time in odin flashing is all done but after restart its stuck on samsung logo and in corner recovery booting if somebody have solution just post here thanx

04-03-2014, 13:55	#2 (permalink)
mobilfix Junior Member Join Date: Feb 2014 Posts: 7 Member: 2123431 Status: Offline Thanks Meter: 1	i think no body have solution

04-04-2014, 17:58	#3 (permalink)
niflas Insane Poster Join Date: Mar 2006 Posts: 86 Member: 238772 Status: Offline Thanks Meter: 8	I also have 2 pcs same problem. I tried everything in software n repaired boot with riff box but every thing success but same issue. I am going to try hardware n reply

04-05-2014, 18:37	#4 (permalink)
niflas Insane Poster Join Date: Mar 2006 Posts: 86 Member: 238772 Status: Offline Thanks Meter: 8	I made 2 units in hardware 10000% success. Don't wast time is software

04-05-2014, 23:45	#5 (permalink)
senses Freak Poster Join Date: Jul 2007 Location: Turkey Posts: 132 Member: 548988 Status: Offline Sonork: 100.1624541 Thanks Meter: 10	What is the solution for it? Hardware what?

04-06-2014, 06:29	#6 (permalink)
alextp87 Junior Member Join Date: Feb 2012 Posts: 26 Member: 1720209 Status: Offline Thanks Meter: 2	small tips: check volume + button... try to desolder it. if your phone will power up normally you must replace the switch.

04-07-2014, 05:23	#7 (permalink)
niflas Insane Poster Join Date: Mar 2006 Posts: 86 Member: 238772 Status: Offline Thanks Meter: 8	Heat this red marked aria then phone will start normaly after that flash the phone with 4.4.2. using odin. after software done imei will be blank then rebuild imei number. now job is done

04-07-2014, 12:14	#8 (permalink)
mobilfix Junior Member Join Date: Feb 2014 Posts: 7 Member: 2123431 Status: Offline Thanks Meter: 1	i have extra mother board demo unit and i take same ic from demo unit and put it on stuck recovery mode mobiler now the phone is dead

04-09-2014, 04:56	#9 (permalink)
niflas Insane Poster Join Date: Mar 2006 Posts: 86 Member: 238772 Status: Offline Thanks Meter: 8	I made 2 phones both are working perfectly

05-04-2014, 13:51	#11 (permalink)
riaz Freak Poster Join Date: Dec 2003 Location: Bangalore, India Age: 58 Posts: 279 Member: 45873 Status: Offline Thanks Meter: 35	19505 vibrates and restarts every sec flased different files of ver 4.4.2 even tried 4 files firmware with pit . Able to enter recovery and download mode details in download mode Product code:GT-I9505 current binary:Samsung official system status:Custom Knox Kernel Lock:0x0 Knox warranty Void:0x1 CSB-CONFIG-LSB:0x30 Write Protection: Enable eMMC burst mode:enabled any suggestions Regards Riaz

05-04-2014, 17:25	#12 (permalink)
riaz Freak Poster Join Date: Dec 2003 Location: Bangalore, India Age: 58 Posts: 279 Member: 45873 Status: Offline Thanks Meter: 35	Problem solved It was power switch problem Regards Riaz

05-04-2014, 20:22	#13 (permalink)
Hussain_Mobile No Life Poster Join Date: Jan 2008 Location: in Your Heart :) Posts: 747 Member: 681758 Status: Offline Sonork: 100.1676160 Thanks Meter: 347	1 check battery 2 power swtich 3 try to flash on 4.4 in last check on hardware Enjoy

05-21-2014, 16:19	#14 (permalink)
sidah_gsm Freak Poster Join Date: May 2007 Location: algeria Age: 45 Posts: 236 Member: 514031 Status: Offline Thanks Meter: 7	i have sam probleme i n my i9505 in download mode Product code:GT-I9505 current binary:Samsung official system status:Custom Knox Kernel Lock:0x0 Knox warranty Void:0x1 CSB-CONFIG-LSB:0x30 Write Protection: Enable eMMC burst mode:enabled pls how solvet it