How to flash Samsung B7722? - Page 3 - GSM-Forum

MaMsAnA · 08-13-2011, 04:57

Quote:

Originally Posted by tienemi

Here is Real Driver b7722

tested working 100%%%%

THx

i hold Vol - And network switch and connect phone to pc ; but pc cant recognize phone!
how can I install these driver that PC knows my phone?

JC_BY · 08-31-2011, 10:34

If you have problem that flasher doesn't start flash, even device is connected and seen in Device Manager. Do this step:

1. Connect phone with Volume+ and Hold buttons - you see in Device Manager "USB device with DFU Capabilites"
2. Try to Update force driver to 52xdfu.inf, wich is placed in Flasher folder
3. Try to start agailn

Tinotenda · 09-08-2011, 12:32

Quote:

Originally Posted by JC_BY

If you have problem that flasher doesn't start flash, even device is connected and seen in Device Manager. Do this step:

1. Connect phone with Volume+ and Hold buttons - you see in Device Manager "USB device with DFU Capabilites"
2. Try to Update force driver to 52xdfu.inf, wich is placed in Flasher folder
3. Try to start agailn

please are u using usb cable only, cant flash slave here

samreen111 · 10-04-2011, 07:45

after flash my mobile enter blink on logo

serseg.gsm · 11-27-2011, 16:23

@JC_BY
thanks you friend your trick is very helpfull.

.:KHALIFA:. · 12-19-2011, 07:05

first of all thanx to JC_BY for the useful post...

now here is the step by step procesure to flash B7722i..

1. Connect phone with Volume+ and Hold buttons - you see in Device Manager "USB device with DFU Capabilites"
2. Try to Update force driver to 52xdfu.inf, wich is placed in Flasher folder
3. Open flasher and follow instructions below

For downloading on Master

1 Select the “xxxx.usbid” using “SET USB ID” button.ex)공정UsbInstanceID.usbid-This step is only needed by product line2.

2 Select The “B7722_Sorrento_Setting_v01.mdl” using “SET MODEL” button.

3 Select The “Model_Name.ptt” using “Partition Table” button of Main.

4 Select the “Model_Name.ptt” of CSCex) B7722XX.ptt

For downloading on Slave

1.Choose one between With Slave andOnly Slave.With Slave : Downloading with MasterOnly Slave : Downloading only on Slave2.

2 Select The “Slave Setting File(.mdl)”ex) Slave_Setting_v01.mdl

3 Select The “Slave Application(.cla)”ex) SorrentoSlave.cla

press “START” button

NOTE: people facing problem with slave flashing needs to tick the WITH SLAVE .

thnx to shah.meer7879 for flashing procesure

BR
.:KHALIFA:.

praji · 02-09-2012, 09:11

Quote:

Originally Posted by abdullaroz75

CHECK IT OUT USE Flash_loader_7.2.4_SEC_2.4_Lite_And_Slave_0.4 FOR FLASHING

Flash_loader_7.2.4_SEC_2.4_Lite_And_Slave_0.4.rar

alkhaleejmobile · 02-09-2012, 12:15

any body help plz,,i got some error

when select usb id,,,

filetxt.cpp

plz help what is this

AL-NAJAT · 03-01-2012, 19:59

Quote:

Originally Posted by tienemi

Here is Real Driver b7722

tested working 100%%%%

bigg thannnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn x br
i,m testd frome Cellular Handset with DFU Capabilities friver ok
100000000000000000 %
flash

adlene2005 · 03-12-2012, 04:03

Quote:

Originally Posted by alkhaleejmobile

any body help plz,,i got some error

when select usb id,,,

filetxt.cpp

plz help what is this

same proble how to solve it

farofaro · 03-22-2012, 09:57

bnj je un problem avec z3x je n'arive pas a instale le box comment je veu faire aide moi

big_gsm · 03-24-2012, 11:43

Well i downloaded Flash_loader_7.2.4_SEC_2.4_Lite_And_Slave_0.4 and loaded all files well and installed drivers when connecting phone but when i click start nothing happens...help pls

atou · 03-24-2012, 12:57

Quote:

Originally Posted by farofaro

bnj je un problem avec z3x je n'arive pas a instale le box comment je veu faire aide moi

contact mw sur [email protected]

merci

big_gsm · 03-24-2012, 16:44

my Problem solved :-)

big_gsm · 03-24-2012, 18:45

I flashed b7722 sucessfully but cannot flash B7722i, cannot select slave setting(.mdl)...but selected slave application(.cla), and when i click on "start" says "binary is crashed". So then i ticked on "only slave"...now when i click on "start" says "check the comport number"
Help

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Seeking for flash nokia 5110 old version (3 version) can exchange for new	Tomas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	10-14-2017 19:29
news headlines to gsm phone	mos	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	7	05-22-2016 11:42
How can I do a Welcome note for my 6110 a dosn't have any one ?	Viper	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	06-27-2015 11:57
How to add a language in 51xx/61xx	tati	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	05-21-2013 19:20
How to upload a new firmware...	Brand	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	06-08-2012 18:29

10-04-2011, 07:45	#34 (permalink)
samreen111 No Life Poster Join Date: Aug 2010 Location: find me Posts: 1,737 Member: 1377174 Status: Offline Thanks Meter: 226	after flash my mobile enter blink on logo

11-27-2011, 16:23	#35 (permalink)
serseg.gsm No Life Poster Join Date: Aug 2004 Location: there Age: 19 Posts: 832 Member: 77394 Status: Offline Thanks Meter: 118	@JC_BY thanks you friend your trick is very helpfull.

12-19-2011, 07:05	#36 (permalink)
.:KHALIFA:. No Life Poster Join Date: May 2006 Location: U wont beleive Age: 43 Posts: 1,293 Member: 275631 Status: Offline Thanks Meter: 408	first of all thanx to JC_BY for the useful post... now here is the step by step procesure to flash B7722i.. 1. Connect phone with Volume+ and Hold buttons - you see in Device Manager "USB device with DFU Capabilites" 2. Try to Update force driver to 52xdfu.inf, wich is placed in Flasher folder 3. Open flasher and follow instructions below For downloading on Master 1 Select the “xxxx.usbid” using “SET USB ID” button.ex)공정UsbInstanceID.usbid-This step is only needed by product line2. 2 Select The “B7722_Sorrento_Setting_v01.mdl” using “SET MODEL” button. 3 Select The “Model_Name.ptt” using “Partition Table” button of Main. 4 Select the “Model_Name.ptt” of CSCex) B7722XX.ptt For downloading on Slave 1.Choose one between With Slave andOnly Slave.With Slave : Downloading with MasterOnly Slave : Downloading only on Slave2. 2 Select The “Slave Setting File(.mdl)”ex) Slave_Setting_v01.mdl 3 Select The “Slave Application(.cla)”ex) SorrentoSlave.cla press “START” button NOTE: people facing problem with slave flashing needs to tick the WITH SLAVE . thnx to shah.meer7879 for flashing procesure BR .:KHALIFA:.

02-09-2012, 12:15	#38 (permalink)
alkhaleejmobile No Life Poster Join Date: Nov 2008 Location: saudi arabia Posts: 3,840 Member: 904809 Status: Offline Sonork: 100.1615464 Thanks Meter: 738	any body help plz,,i got some error when select usb id,,, filetxt.cpp plz help what is this

03-22-2012, 09:57	#41 (permalink)
farofaro Junior Member Join Date: Aug 2011 Posts: 3 Member: 1631072 Status: Offline Thanks Meter: 0	bnj je un problem avec z3x je n'arive pas a instale le box comment je veu faire aide moi

03-24-2012, 11:43	#42 (permalink)
big_gsm No Life Poster Join Date: Feb 2009 Posts: 1,463 Member: 969318 Status: Offline Thanks Meter: 82	Well i downloaded Flash_loader_7.2.4_SEC_2.4_Lite_And_Slave_0.4 and loaded all files well and installed drivers when connecting phone but when i click start nothing happens...help pls

03-24-2012, 16:44	#44 (permalink)
big_gsm No Life Poster Join Date: Feb 2009 Posts: 1,463 Member: 969318 Status: Offline Thanks Meter: 82	my Problem solved :-)

03-24-2012, 18:45	#45 (permalink)
big_gsm No Life Poster Join Date: Feb 2009 Posts: 1,463 Member: 969318 Status: Offline Thanks Meter: 82	I flashed b7722 sucessfully but cannot flash B7722i, cannot select slave setting(.mdl)...but selected slave application(.cla), and when i click on "start" says "binary is crashed". So then i ticked on "only slave"...now when i click on "start" says "check the comport number" Help