How to Update Android 4.4.2 KitKat Official Firmware on Galaxy Note 3 N900 via Odin:

[gsmforce1]

How to Update Android 4.4.2 KitKat Official Firmware on Galaxy Note 3 N900 via Odin:

India--Firmware








1-Download Android 4.4.2 XXUDNA6 Firmware for Galaxy Note 3 N900 from the above list


2-Download-0din.v3.09




3-Switch off your phone and boot Galaxy Note 3 N900 into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.


4-Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the .exe file and click on Run as administrator)


5-Now connect your Galaxy Note 3 N900 to your computer via USB cable


6-In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3


7-Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.


8-Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5


9-In Odin screen, click on PDA button and select the firmware file with .tar.md5 extension (The firmware file look something like: N900XXDLJ5_N900ODDDLI7_INU.tar.md5)


10-Now, click on the Start button to begin the installation process, wait few moments.


11-Once completed, you would see “PASS!” message in ID:COM port having green background


12-our phone should automatically reboot after completion


13-You can now disconnect your phone from computer


14-Finish


Congrats! You have finish updating your device. Hope you successfully completed the tutorial to update Android 4.4.2 KitKat