N950u atyt

[GSM_FIX]

Hi, I have problem with note8 n950u, after try to flash combination bit4 for frp unlock, and error occurred and the phone dont access to flash mode, and the pc doesn't recognize...any help or suggestions? Thanks in advance

Enviado desde mi SM-G928P mediante Tapatalk

[BillA]

Originally Posted by GSM_FIX

Hi, I have problem with note8 n950u, after try to flash combination bit4 for frp unlock, and error occurred and the phone dont access to flash mode, and the pc doesn't recognize...any help or suggestions? Thanks in advance

Enviado desde mi SM-G928P mediante Tapatalk

Sprint Note-8 N950U unlock via combination file (Rev-5) worked fine.
First flash with combi, unlock (using model G930P) then reflash with full stock (N950U1 version).
When flashing both combi and stock, I always enable Nand Erase under Options, and also select the PIT file (extracted from the non-home CSC file in stock).
To unlock the ATT version, just flash it with full Rev-5 stock (N950U1 version), and select read codes in Z3X.
If you're unable to get into download mode, try holding down Bixby + Vol Down + Power for about 30 seconds or more.
It's also possible that your battery has died completely, in which case you may need to open up the phone and replace the battery temporarily with a fully charged one, or use an external battery charger.


Operation: Unlock
Selected model: SM-G930P
Software version: 33.8
Waiting ADB device... OK
Reading phone info...
Model: SM-N950U
Android version: 7.1.1
PDA version: FA71_N950USQU5ARG2
CSC version:
Phone version: N950USQU5ARF1
Product code: SM-N950UZKASPR
CSC country code:
CSC sales code:
Phone SN: R28J91Jxxxx
IMEI: 35850308235xxxx
HW version: REV1.0
RF cal date: 2017.09.13
Chip name: MSM8998
Modem board: MSM8998
Security patch: 2017-07-01
Boot Warranty bit: 0
Incorrect model selected. This may damage your phone. Continue? Yes
Writing AT RIL... OK
Initialization AT RIL... OK
Unlocking... OK
Rebooting phone... OK
Unlock done
Done with Samsung Tool PRO v.33.8

[GSM_FIX]

Yes, I know this...my problem was frp unlock issue.
After flash combination the phone dead, no download mode, recovery, the problem was solved after left the battery drain completely. Put in download mode and reflash stock firmware

Originally Posted by BillA

Sprint Note-8 N950U unlock via combination file (Rev-5) worked fine.
First flash with combi, unlock then reflash with full stock (N950U1 version).
When flashing both combi and stock, I always enable Nand Erase under Options, and also select the PIT file (extracted from the non-home CSC file in stock).
To unlock the ATT version, just flash it with full Rev-5 stock ((N950U1 version), and select read codes in Z3X.


Operation: Unlock
Selected model: SM-G930P
Software version: 33.8
Waiting ADB device... OK
Reading phone info...
Model: SM-N950U
Android version: 7.1.1
PDA version: FA71_N950USQU5ARG2
CSC version:
Phone version: N950USQU5ARF1
Product code: SM-N950UZKASPR
CSC country code:
CSC sales code:
Phone SN: R28J91Jxxxx
IMEI: 35850308235xxxx
HW version: REV1.0
RF cal date: 2017.09.13
Chip name: MSM8998
Modem board: MSM8998
Security patch: 2017-07-01
Boot Warranty bit: 0
Incorrect model selected. This may damage your phone. Continue? Yes
Writing AT RIL... OK
Initialization AT RIL... OK
Unlocking... OK
Rebooting phone... OK
Unlock done
Done with Samsung Tool PRO v.33.8

Enviado desde mi SAMSUNG-SM-G930A mediante Tapatalk