S5230 boot dead. No download mode - GSM-Forum

tincup.7 · 06-27-2014, 20:42

Hi,
after a failed firmware update my s5230 will not turn on. I think this is the bootloader. you can recover the boot without using external hardware box (Z3X and the like)? I have a E210 cable but when I connect the phone, the usb device is not recognized (windows 7).
you can retrieve the boot with S5230 UART downloader? How do I know which is the COM port and Baud?
Sorry for my bad english

gile@gile · 06-27-2014, 20:50

Quote:

Originally Posted by tincup.7

Hi,
after a failed firmware update my s5230 will not turn on. I think this is the bootloader. you can recover the boot without using external hardware box (Z3X and the like)? I have a E210 cable but when I connect the phone, the usb device is not recognized (windows 7).
you can retrieve the boot with S5230 UART downloader? How do I know which is the COM port and Baud?
Sorry for my bad english

How To Update Firmware Of Samsung S5230 / S5233A Star

tincup.7 · 06-27-2014, 22:54

This tutorial uses Multiloader that works with the phone in download mode. My phone can not activate the download mode. The boot is dead. Not turn on.

tincup.7 · 06-28-2014, 12:45

please help

mobite · 06-28-2014, 12:50

1. Check or battery fully charged .
2. Run z3x sw, choose S5230M, press Boot repair
3. Connect z3x E210 Rj45 part of cables cable to phone and wait.
4. If you will see LCD "z3x mode for repair"- so phone in download mode and you lucky -> after
5. Disconect z3x cable, connect usb cable(pc should detect device).
6. Setup drivers.
7. Run multidownloader and flash full firware with boot with ticked (full download)

tincup.7 · 06-28-2014, 15:10

Quote:

Originally Posted by mobite

1. Check or battery fully charged .
2. Run z3x sw, choose S5230M, press Boot repair
3. Connect z3x E210 Rj45 part of cables cable to phone and wait.
4. If you will see LCD "z3x mode for repair"- so phone in download mode and you lucky -> after
5. Disconect z3x cable, connect usb cable(pc should detect device).
6. Setup drivers.
7. Run multidownloader and flash full firware with boot with ticked (full download)

I do not have a smart card for ZX3 and without it I can not download updates for the shell and I can not start the samsung tool.

how can I do?

tincup.7 · 06-29-2014, 17:23

help please!!!!

jawab · 06-30-2014, 15:33

repair boot with hwk.........that's very simpl

tincup.7 · 06-30-2014, 17:33

hwk requires box.

there are solutions without box? please

tincup.7 · 07-04-2014, 22:03

haroon008 · 07-04-2014, 23:21

Boot repair with Z3x very easy direct open 2g tool select model 5330 & press boot repar

tincup.7 · 07-06-2014, 10:03

2gtool requires the card to start.

tincup.7 · 07-11-2014, 17:49

no solution

06-27-2014, 20:42	#1 (permalink)
tincup.7 Junior Member Join Date: Jun 2014 Posts: 9 Member: 2212102 Status: Offline Thanks Meter: 1	S5230 boot dead. No download mode Hi, after a failed firmware update my s5230 will not turn on. I think this is the bootloader. you can recover the boot without using external hardware box (Z3X and the like)? I have a E210 cable but when I connect the phone, the usb device is not recognized (windows 7). you can retrieve the boot with S5230 UART downloader? How do I know which is the COM port and Baud? Sorry for my bad english

06-30-2014, 15:33	#8 (permalink)
jawab Junior Member Join Date: May 2012 Posts: 4 Member: 1757584 Status: Offline Sonork: 80200 Thanks Meter: 1	boot repair s5230 with hwk repair boot with hwk.........that's very simpl

06-27-2014, 22:54	#3 (permalink)
tincup.7 Junior Member Join Date: Jun 2014 Posts: 9 Member: 2212102 Status: Offline Thanks Meter: 1	This tutorial uses Multiloader that works with the phone in download mode. My phone can not activate the download mode. The boot is dead. Not turn on.

06-28-2014, 12:45	#4 (permalink)
tincup.7 Junior Member Join Date: Jun 2014 Posts: 9 Member: 2212102 Status: Offline Thanks Meter: 1	please help

06-28-2014, 12:50	#5 (permalink)
mobite No Life Poster Join Date: Aug 2012 Location: MUMBAI-METRO Age: 37 Posts: 1,290 Member: 1800009 Status: Offline Sonork: 100.1654307 Thanks Meter: 806	1. Check or battery fully charged . 2. Run z3x sw, choose S5230M, press Boot repair 3. Connect z3x E210 Rj45 part of cables cable to phone and wait. 4. If you will see LCD "z3x mode for repair"- so phone in download mode and you lucky -> after 5. Disconect z3x cable, connect usb cable(pc should detect device). 6. Setup drivers. 7. Run multidownloader and flash full firware with boot with ticked (full download)

06-29-2014, 17:23	#7 (permalink)
tincup.7 Junior Member Join Date: Jun 2014 Posts: 9 Member: 2212102 Status: Offline Thanks Meter: 1	help please!!!!

06-30-2014, 17:33	#9 (permalink)
tincup.7 Junior Member Join Date: Jun 2014 Posts: 9 Member: 2212102 Status: Offline Thanks Meter: 1	hwk requires box. there are solutions without box? please

07-04-2014, 22:03	#10 (permalink)
tincup.7 Junior Member Join Date: Jun 2014 Posts: 9 Member: 2212102 Status: Offline Thanks Meter: 1

07-04-2014, 23:21	#11 (permalink)
haroon008 Freak Poster Join Date: Nov 2013 Posts: 453 Member: 2062801 Status: Offline Thanks Meter: 41	Boot repair with Z3x very easy direct open 2g tool select model 5330 & press boot repar

07-06-2014, 10:03	#12 (permalink)
tincup.7 Junior Member Join Date: Jun 2014 Posts: 9 Member: 2212102 Status: Offline Thanks Meter: 1	2gtool requires the card to start.

07-11-2014, 17:49	#13 (permalink)
tincup.7 Junior Member Join Date: Jun 2014 Posts: 9 Member: 2212102 Status: Offline Thanks Meter: 1	no solution