S5369 Odin Wont Flash - GSM-Forum

sativageezer · 08-25-2012, 10:36

Have a S5369 that wont boot was hanging on first Galaxy Y logo, after reset factory settings has progressed to hanging on the glowing Samsung logo.
It goes into download mode no problem. Odin recognises it fine but wont flash it. The status window at top very quickly shows MODEM and it fails.

<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5369BULA1_S5369ATLLA1_S5369BULA1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> sbl.bin
<ID:0/009> NAND Write Start!!
<ID:0/009> BcmCP.img
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

HAITEKGSM · 09-24-2012, 14:29

hi i am same probleme
i try it with 5360 5363 5369 with odin 1,84 but no luck always error
thanks

**aZimBahar** · 09-25-2012, 13:38

Brother Try To Use Full Firmware Package .That Mean Modem Pda Csc Etc . Post Result . . .

pachicoo · 12-12-2012, 10:25

where to donwload full firmware of this mobile
no one can help to flash this mobile

nonsonett · 10-23-2014, 17:52

<ID:0/019> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> DefaultCalDataWithBoot_S5369BULA1_REV05.tar.md5 is valid.
<OSM> PDA_S5369BULA1_REV05.tar.md5 is valid.
<OSM> MODEM_S5369BULA1_REV05.tar.md5 is valid.
<OSM> GT-S5369-csc-VDRLA1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/019> Odin v.3 engine (ID:19)..
<ID:0/019> File analysis..
<ID:0/019> SetupConnection..
<ID:0/019> Initialzation..
<ID:0/019> Set PIT file..
<ID:0/019> DO NOT TURN OFF TARGET!!
<ID:0/019> Get PIT for mapping..
<ID:0/019> Firmware update start..
<ID:0/019> BcmBoot.img
<ID:0/019> NAND Write Start!!
<ID:0/019> HEDGE_NVRAM8_RF_LE.bin
<ID:0/019> sysparm_dep.img
<ID:0/019> Sbl.bin
<ID:0/019> boot.img
<ID:0/019> system.img
<ID:0/019> userdata.img
<ID:0/019> param.lfs
<ID:0/019> BcmCP.img
<ID:0/019> Transmission Complete..
<ID:0/019> Now Writing.. Please wait about 2 minutes
<ID:0/019> Receive Response form LOKE
<ID:0/019> csc.rfs
<ID:0/019> RQT_CLOSE !!
<ID:0/019> RES OK !!
<ID:0/019> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/019> Removed!!
<ID:0/201> Added!!
<ID:1/056> Added!!
<ID:1/056> Removed!!
<ID:0/201> Removed!!

08-25-2012, 10:36	#1 (permalink)
sativageezer Junior Member Join Date: Sep 2010 Posts: 22 Member: 1386432 Status: Offline Thanks Meter: 1	S5369 Odin Wont Flash Have a S5369 that wont boot was hanging on first Galaxy Y logo, after reset factory settings has progressed to hanging on the glowing Samsung logo. It goes into download mode no problem. Odin recognises it fine but wont flash it. The status window at top very quickly shows MODEM and it fails. <OSM> Enter CS for MD5.. <OSM> Check MD5.. Do not unplug the cable.. <OSM> Please wait.. <OSM> S5369BULA1_S5369ATLLA1_S5369BULA1_HOME.tar.md5 is valid. <OSM> Checking MD5 finished Sucessfully.. <OSM> Leave CS.. <ID:0/009> Odin v.3 engine (ID:9).. <ID:0/009> File analysis.. <ID:0/009> SetupConnection.. <ID:0/009> Initialzation.. <ID:0/009> Get PIT for mapping.. <ID:0/009> Firmware update start.. <ID:0/009> sbl.bin <ID:0/009> NAND Write Start!! <ID:0/009> BcmCP.img <ID:0/009> <ID:0/009> Complete(Write) operation failed. <OSM> All threads completed. (succeed 0 / failed 1)

09-24-2012, 14:29	#2 (permalink)
HAITEKGSM Freak Poster Join Date: Jan 2002 Location: Germany,Hessen Posts: 282 Member: 8966 Status: Offline Thanks Meter: 31	same probleme hi i am same probleme i try it with 5360 5363 5369 with odin 1,84 but no luck always error thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
need to flash 6110	paulomt1	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	08-16-2019 19:37
Seeking for flash nokia 5110 old version (3 version) can exchange for new	Tomas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	10-14-2017 19:29
5110 flash new software , need help	steve	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	01-03-2015 05:41
NHE_8 wont work with NHEK5689.dll v3	steve	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	07-23-1999 15:48

09-25-2012, 13:38	#3 (permalink)
aZimBahar Product Manager Join Date: Dec 2009 Location: CEO.of.ROMDevelopers Age: 32 Posts: 16,001 Member: 1174508 Status: Offline Sonork: 100.1593820 Thanks Meter: 11,978	Brother Try To Use Full Firmware Package .That Mean Modem Pda Csc Etc . Post Result . . .

12-12-2012, 10:25	#4 (permalink)
pachicoo No Life Poster Join Date: Sep 2007 Location: Madrid, Spain Posts: 1,140 Member: 591052 Status: Offline Sonork: 100.1592747 Thanks Meter: 95	where to donwload full firmware of this mobile no one can help to flash this mobile

10-23-2014, 17:52	#5 (permalink)
nonsonett Freak Poster Join Date: Sep 2012 Posts: 235 Member: 1812725 Status: Offline Thanks Meter: 17	<ID:0/019> Added!! <OSM> Enter CS for MD5.. <OSM> Check MD5.. Do not unplug the cable.. <OSM> Please wait.. <OSM> DefaultCalDataWithBoot_S5369BULA1_REV05.tar.md5 is valid. <OSM> PDA_S5369BULA1_REV05.tar.md5 is valid. <OSM> MODEM_S5369BULA1_REV05.tar.md5 is valid. <OSM> GT-S5369-csc-VDRLA1.tar.md5 is valid. <OSM> Checking MD5 finished Sucessfully.. <OSM> Leave CS.. <ID:0/019> Odin v.3 engine (ID:19).. <ID:0/019> File analysis.. <ID:0/019> SetupConnection.. <ID:0/019> Initialzation.. <ID:0/019> Set PIT file.. <ID:0/019> DO NOT TURN OFF TARGET!! <ID:0/019> Get PIT for mapping.. <ID:0/019> Firmware update start.. <ID:0/019> BcmBoot.img <ID:0/019> NAND Write Start!! <ID:0/019> HEDGE_NVRAM8_RF_LE.bin <ID:0/019> sysparm_dep.img <ID:0/019> Sbl.bin <ID:0/019> boot.img <ID:0/019> system.img <ID:0/019> userdata.img <ID:0/019> param.lfs <ID:0/019> BcmCP.img <ID:0/019> Transmission Complete.. <ID:0/019> Now Writing.. Please wait about 2 minutes <ID:0/019> Receive Response form LOKE <ID:0/019> csc.rfs <ID:0/019> RQT_CLOSE !! <ID:0/019> RES OK !! <ID:0/019> Completed.. <OSM> All threads completed. (succeed 1 / failed 0) <ID:0/019> Removed!! <ID:0/201> Added!! <ID:1/056> Added!! <ID:1/056> Removed!! <ID:0/201> Removed!!