s6102: what software to use for the flash?
 

where i can find s6102 flasher
i tested all odin version without success
i need tested version
regardes

thx ,but i need flasher not flash file

downloader + pit file attached

BR

<ID:0/126> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S6102JPLC3_S6102OJPLB1_S6102XXLC2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/126> Odin v.3 engine (ID:126)..
<ID:0/126> File analysis..
<ID:0/126> SetupConnection..
<ID:0/126> Initialzation..
<ID:0/126> Set PIT file..
<ID:0/126> DO NOT TURN OFF TARGET!!
<ID:0/126> Get PIT for mapping..
<ID:0/126> Firmware update start..
<ID:0/126> sbl.bin
<ID:0/126> NAND Write Start!!
<ID:0/126> BcmCP.img
<ID:0/126>
<ID:0/126> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

check this out:
http://forum.gsmhosting.com/vbb/f200...0/#post8386752

hi , i try to flash via odin with pit file with this S6102JPLA3_S6102OJPLA3 and always get error , it's one package file , and when flashing it with the other firmware with separate file it ok ,
I need to have arabic thats why use that file S6102JPLA3_S6102OJPLA3

Thanks
regards

its work fine with me same file version
try with full battary and dont mark repartion
br

<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOT_S6102XXLD5_REV02.tar.md5 is valid.
<OSM> PDA_S6102JPLE1_REV02.tar.md5 is valid.
<OSM> MODEM_S6102XXLD5_REV02.tar.md5 is valid.
<OSM> GT-S6102-MULTI-CSC-OJPLD3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..

AFTER NOT MOVING....
PLZ.... HELP ME SIR.................

<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOT_S6102XXLD5_REV02.tar.md5 is valid.
<OSM> PDA_S6102JPLE1_REV02.tar.md5 is valid.
<OSM> MODEM_S6102XXLD5_REV02.tar.md5 is valid.
<OSM> GT-S6102-MULTI-CSC-OJPLD3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..


AFFTER NOT MOVING PLZ HELP ME SIR

thank's for share sir.....

Hello sir.

could share the firmware I am using?

Greetings.

Model: GT-S6102
Android version: 2.3.6
Product code: Unknown
Phone version: S6102ZSLH2
PDA version: S6102ZSLH2
CSC version: S6102OZSLH2
IMEI: Unknown
Checking Super user right... true
Reading data from phone... OK
Unlocking... OK
Rebooting phone... OK
Unlock done
Done with Samsung Tool v.14.6

bro unlock after no network.........