Samsung b7330 successfully flash done with flasher .

[aZimBahar]

Samsung b7330 successfully flash done with flasher .

1. open B7330_MSM7255_MultiDownloader_Line_v94_Scala .
   
2. Click Phone button and select: Phone_B7330xxxxx.bin
3. Click Eboot button and select: eboot_xxxxx_REV08_RC1.eb0
4. Click PDA button and select: flash_xxxxx_REV08_RC1.pda
5. Click CSC button and select: B7330xxxxxx.csc
6. Check These Options: CSC Priority Bit, Select / Deselect All.
7. Make Sure this option not selected: EFS clear.
8. Turn off the phone then Press ( J ) Key and connect USB cable to it.
9. When the Program detect the phone the Start button will be Active.
10. Click Start button to update the phone firmware.
11. Do nothing till the program says " Download pass" in green.

here flasher .
http://www.4shared.com/rar/fRwAWgq4/b7330_flasher.html

here done log . . .

Detect COM4 Port
Open Phone image at : C:\Documents and Settings\Administrator\My Documents\Downloads\Compressed\B7330_JPJC4\Phone_B 7330XXJB1.bin
Open Eboot image at : C:\Documents and Settings\Administrator\My Documents\Downloads\Compressed\B7330_JPJC4\eboot_J PJC4_REV08_RC1.eb0
Open PDA image at : C:\Documents and Settings\Administrator\My Documents\Downloads\Compressed\B7330_JPJC4\flash_J PJC4_REV08_RC1.pda
Open CSC image at : C:\Documents and Settings\Administrator\My Documents\Downloads\Compressed\B7330_JPJC4\B7330MI DJE1.csc
[Channel 0] FLASH UNLOCK
[Channel 0] FLASH UNLOCK Success!!!
[Channel 0] Send Partition Table
[Channel 0] Partition Table is correct
[Channel 0] MCCI - Enabled
[Channel 0] USB Mode : MCCI
[Channel 0] SafeDownload - Enabled
[Channel 0] Download Mode : Safe Download
[Channel 0] Sending QCSBL Data
[Channel 0] Check CRC QCSBL Data
[Channel 0] Check CRC OK !
[Channel 0] Erase QCSBL Region
[Channel 0] Start Flashing Partition QCSBL !
[Channel 0] Flashing QCSBL Data Done.
[Channel 0] QCSBL Download Success!!
[Channel 0] Sending OEMSBL Data
[Channel 0] Check CRC OEMSBL Data
[Channel 0] Check CRC OK !
[Channel 0] Erase OEMSBL Region
[Channel 0] Start Flashing Partition OEMSBL !
[Channel 0] Flashing OEMSBL Data Done.
[Channel 0] OEMSBL Download Success!!
[Channel 0] MIBIB Download Success!!
[Channel 0] Send MIBIB Header Data 1f !!!
[Channel 0] Send MIBIB Header Data Success!!!
[Channel 0] Sending AMSS Data
[Channel 0] Check CRC AMSS Data
[Channel 0] Check CRC OK !
[Channel 0] Erase AMSS Region
[Channel 0] Start Flashing Partition AMSS !
[Channel 0] Flashing AMSS Data Done.
[Channel 0] AMSS Download Success!!
[Channel 0] Erase FOTA Region
[Channel 0] Write FOTA Data
[Channel 0] FOTA Download Success!!
[Channel 0] Erase APPSBL Region
[Channel 0] StartAddr:0x02cc0000 , DataLength : 0x000e0000, EraseLength : 0x00160000
[Channel 0] Write APPSBL Data
[Channel 0] APPSBL Download Success!!
[Channel 0] Write CSC Size
[Channel 0] SZ_PDA Erase Region
[Channel 0] SZ_PDA Write Data
[Channel 0] SZ_PDA Download Success!!
[Channel 0] Erase CARRIER Region
[Channel 0] Write CARRIER Data
[Channel 0] CARRIER Download Success!!
[Channel 0] FLASH LOCK
[Channel 0] FLASH LOCK Success!!!

Br.
..::azimbahar::..

[aZimBahar]

B7330 Hrad Reset


B7330 phone powered off .
press and hold 5(F) key + power to turn on the phone .
now select 1(E) key then press y key
after done hard reset .




Br.
..::azimbahar::..