Samsung CDMA Codes - GSM-Forum

samirov-gsm · 03-21-2009, 09:09

All type of phones (old modeles):
NAM programming: 47*869#08#9
Test mode: *759#813580 or 5809540*45680
exit test mode - 02
A-Key: menu + 0, code 25##

samirov-gsm · 03-21-2009, 09:10

Samsung A500
1. Enter ## and the 6 digit OTKSL
2. SERVICE MENU will appear and 1.Basic will be highlighted
3. Press OK
4. Device will display NAM CDMA/ Phone Number cellguy_jumping
5. Enter 10 digit MIN
6. Press OK (3 times)
7. Display will return to Service Menu. Press END.
8. Programming is complete

samirov-gsm · 03-21-2009, 09:10

Samsung N240 and N400
1. Enter ## and type in the 6 digit OTKSL
2. The display will show SVC MENU and 1. Phone Number
3. Press OK
4. Enter the 10 digit MIN, OK
5. The display will show NAM with Home SID
6. Press OK
7. The display will return to the SVC MENU
8. Press END to complete the programming

samirov-gsm · 03-21-2009, 09:11

Samsung sph-N240, N400, N460, A500, etc
Nam Programming:
Nam Set: ##Spc
Test Mode: 47*869#1235
Debug Menu: ##33284,OK
Service Menu: Menu+8+0 (#889)
Reset (Life time, Clear Memory, etc): ##786,OK
A-key: ##2539,OK
Label Selection: ##3882,OK
Label(Home, Work, etc) : **523,OK
NGG Setting (Gateway, etc.): ##2769737,OK
Vocoder: ##8626337,OK
CAI Change: ##7738,OK
Enable TTY: ##889,OK

samirov-gsm · 03-21-2009, 09:12

Samsung Uproar
1. Press MENU key
2. Enter 9 2 0
3. Enter the OTKSL
4. At SVC Menu screen press OK
5. Enter MIN and press OK 4 times
6. Enter SID (4654) and press OK
7. Press END key
8. Programming is complete

samirov-gsm · 03-21-2009, 09:17

Samsung N300
1. Press ## followed by the OTKSL
2. SVC menu will be displayed
3. Press 1 for Phone #
4. Enter the 10 digit MIN and press OK
5. MIN that was entered will be displayed press OK
6. SVC Menu will display press 3 for NAM
7. Enter the 4 digit Home SID press OK
8. Press END and handset will power cycle

samirov-gsm · 03-21-2009, 09:18

Samsung i300
1. Tap on the Phone Icon with stylus
2. Press #907*9#0 ENTER LOCK should appear on screen
3. ENTER OTKSL
4. SVC MENU will appear press 1
5. Enter 10 digit MIN and then press SAVE
6. Press SAVE again
7. Press 3 and then press SAVE 6 times
8. Enter the HOME SID and press SAVE once
9. Press END key twice

samirov-gsm · 03-21-2009, 09:18

Samsung i700, etc
Nam Programming:
Nam Set: start and select "PHONE" from drop down menu, dial #83587

samirov-gsm · 03-21-2009, 09:20

Samsung A400 and A460
1. Enter ## and OTKSL
2. Press 1 for Basic at MENU (1 of Phone # when using the MSL)
3. Enter 10 digit MIN and press OK
4. At 1.Basic Menu press the END key
5. Handset will power cycle

samirov-gsm · 03-21-2009, 09:21

Samsung 3500 8500 6100 N200
1. Press MENU
2. Press 6 0 (3500) 8 2 0 (8500/6100/N200)
3. Enter OTKSL
4. Press 1 at SVC MENU Screen
5. Enter MIN and press OK
6. Press OK 4 times
7. Enter SID (4654) and press OK
8. Press END key
9. Programming is complete

samirov-gsm · 03-21-2009, 09:21

Samsung sch-411, 611, n105, a100, a300, a2000, etc
Nam Programming:
Nam Set: 47*869#08#9
Nam Set: Menu+60
Test Mode: *759#813580
Test Mode: 5809540*45680
A-key: Menu+0, 25##
External Audio: Menu+0, ####
Debug Menu: Menu+8, 0415 or Spc
Debug Menu: Menu+9, 0415 or Spc
Brief NAM Programing: Menu+40,626 (not all version)
LCD Contrast: Menu+45 (not all version)
SIO Mode: Menu+49
SIO Mode: Menu+69

samirov-gsm · 03-21-2009, 09:22

Samsung A300, A530, A610, A620, A660, A670, etc
Nam Programming:
Nam Set: Menu, 6, *
Service Menu: Menu, 9, *
Test Mode: 47*68#13580

samirov-gsm · 03-21-2009, 09:23

Samsung X, E, V, S-series (korean), e250, v420, s250, etc
Nam Programming:
Nam Set: 6548#0**4#6
Nam Set: 47*869#08#9
Nam Set: 74153697193
Test Mode: 5809540*45680 (88 - efs clear)

samirov-gsm · 03-21-2009, 09:23

Debug Menu: Menu(hold 2sec)+0, 6725 or 9720 or 1973 or 0415

Debug Menu: Menu+0(hold 2sec), 6725 or 9720 or 1973 or 0415

samirov-gsm · 03-21-2009, 09:24

Samsung N356 (India version)
Nam Programming:
Test Mode: Menu, 5, down arrow, *
Test Mode: **00## (in some flashes)

03-21-2009, 09:09	#1 (permalink)
samirov-gsm No Life Poster Join Date: Apr 2008 Posts: 4,525 Member: 759168 Status: Offline Thanks Meter: 12,866	Samsung CDMA Codes All type of phones (old modeles): NAM programming: 47869#08#9 Test mode: 759#813580 or 5809540*45680 exit test mode - 02 A-Key: menu + 0, code 25##

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
samsung cdma B309 ki securty code please help me	md rafiq	Various CDMA/TDMA Cell Phones	4	03-17-2010 21:47
Samsung A130 CDMA - Code for Test menu	son_of_qwerty	Various CDMA/TDMA Cell Phones	3	09-28-2007 14:16
samsung cdma codes	akshaybrid	Various CDMA/TDMA Cell Phones	0	12-13-2004 20:36

03-21-2009, 09:10	#2 (permalink)
samirov-gsm No Life Poster Join Date: Apr 2008 Posts: 4,525 Member: 759168 Status: Offline Thanks Meter: 12,866	Samsung A500 1. Enter ## and the 6 digit OTKSL 2. SERVICE MENU will appear and 1.Basic will be highlighted 3. Press OK 4. Device will display NAM CDMA/ Phone Number cellguy_jumping 5. Enter 10 digit MIN 6. Press OK (3 times) 7. Display will return to Service Menu. Press END. 8. Programming is complete

03-21-2009, 09:10	#3 (permalink)
samirov-gsm No Life Poster Join Date: Apr 2008 Posts: 4,525 Member: 759168 Status: Offline Thanks Meter: 12,866	Samsung N240 and N400 1. Enter ## and type in the 6 digit OTKSL 2. The display will show SVC MENU and 1. Phone Number 3. Press OK 4. Enter the 10 digit MIN, OK 5. The display will show NAM with Home SID 6. Press OK 7. The display will return to the SVC MENU 8. Press END to complete the programming

03-21-2009, 09:11	#4 (permalink)
samirov-gsm No Life Poster Join Date: Apr 2008 Posts: 4,525 Member: 759168 Status: Offline Thanks Meter: 12,866	Samsung sph-N240, N400, N460, A500, etc Nam Programming: Nam Set: ##Spc Test Mode: 47869#1235 Debug Menu: ##33284,OK Service Menu: Menu+8+0 (#889) Reset (Life time, Clear Memory, etc): ##786,OK A-key: ##2539,OK Label Selection: ##3882,OK Label(Home, Work, etc) : *523,OK NGG Setting (Gateway, etc.): ##2769737,OK Vocoder: ##8626337,OK CAI Change: ##7738,OK Enable TTY: ##889,OK

03-21-2009, 09:12	#5 (permalink)
samirov-gsm No Life Poster Join Date: Apr 2008 Posts: 4,525 Member: 759168 Status: Offline Thanks Meter: 12,866	Samsung Uproar 1. Press MENU key 2. Enter 9 2 0 3. Enter the OTKSL 4. At SVC Menu screen press OK 5. Enter MIN and press OK 4 times 6. Enter SID (4654) and press OK 7. Press END key 8. Programming is complete

03-21-2009, 09:17	#6 (permalink)
samirov-gsm No Life Poster Join Date: Apr 2008 Posts: 4,525 Member: 759168 Status: Offline Thanks Meter: 12,866	Samsung N300 1. Press ## followed by the OTKSL 2. SVC menu will be displayed 3. Press 1 for Phone # 4. Enter the 10 digit MIN and press OK 5. MIN that was entered will be displayed press OK 6. SVC Menu will display press 3 for NAM 7. Enter the 4 digit Home SID press OK 8. Press END and handset will power cycle

03-21-2009, 09:18	#7 (permalink)
samirov-gsm No Life Poster Join Date: Apr 2008 Posts: 4,525 Member: 759168 Status: Offline Thanks Meter: 12,866	Samsung i300 1. Tap on the Phone Icon with stylus 2. Press #907*9#0 ENTER LOCK should appear on screen 3. ENTER OTKSL 4. SVC MENU will appear press 1 5. Enter 10 digit MIN and then press SAVE 6. Press SAVE again 7. Press 3 and then press SAVE 6 times 8. Enter the HOME SID and press SAVE once 9. Press END key twice

03-21-2009, 09:18	#8 (permalink)
samirov-gsm No Life Poster Join Date: Apr 2008 Posts: 4,525 Member: 759168 Status: Offline Thanks Meter: 12,866	Samsung i700, etc Nam Programming: Nam Set: start and select "PHONE" from drop down menu, dial #83587

03-21-2009, 09:20	#9 (permalink)
samirov-gsm No Life Poster Join Date: Apr 2008 Posts: 4,525 Member: 759168 Status: Offline Thanks Meter: 12,866	Samsung A400 and A460 1. Enter ## and OTKSL 2. Press 1 for Basic at MENU (1 of Phone # when using the MSL) 3. Enter 10 digit MIN and press OK 4. At 1.Basic Menu press the END key 5. Handset will power cycle

03-21-2009, 09:21	#10 (permalink)
samirov-gsm No Life Poster Join Date: Apr 2008 Posts: 4,525 Member: 759168 Status: Offline Thanks Meter: 12,866	Samsung 3500 8500 6100 N200 1. Press MENU 2. Press 6 0 (3500) 8 2 0 (8500/6100/N200) 3. Enter OTKSL 4. Press 1 at SVC MENU Screen 5. Enter MIN and press OK 6. Press OK 4 times 7. Enter SID (4654) and press OK 8. Press END key 9. Programming is complete

03-21-2009, 09:21	#11 (permalink)
samirov-gsm No Life Poster Join Date: Apr 2008 Posts: 4,525 Member: 759168 Status: Offline Thanks Meter: 12,866	Samsung sch-411, 611, n105, a100, a300, a2000, etc Nam Programming: Nam Set: 47869#08#9 Nam Set: Menu+60 Test Mode: 759#813580 Test Mode: 5809540*45680 A-key: Menu+0, 25## External Audio: Menu+0, #### Debug Menu: Menu+8, 0415 or Spc Debug Menu: Menu+9, 0415 or Spc Brief NAM Programing: Menu+40,626 (not all version) LCD Contrast: Menu+45 (not all version) SIO Mode: Menu+49 SIO Mode: Menu+69

03-21-2009, 09:22	#12 (permalink)
samirov-gsm No Life Poster Join Date: Apr 2008 Posts: 4,525 Member: 759168 Status: Offline Thanks Meter: 12,866	Samsung A300, A530, A610, A620, A660, A670, etc Nam Programming: Nam Set: Menu, 6, * Service Menu: Menu, 9, * Test Mode: 47*68#13580

03-21-2009, 09:23	#13 (permalink)
samirov-gsm No Life Poster Join Date: Apr 2008 Posts: 4,525 Member: 759168 Status: Offline Thanks Meter: 12,866	Samsung X, E, V, S-series (korean), e250, v420, s250, etc Nam Programming: Nam Set: 6548#0*4#6 Nam Set: 47869#08#9 Nam Set: 74153697193 Test Mode: 5809540*45680 (88 - efs clear)

03-21-2009, 09:23	#14 (permalink)
samirov-gsm No Life Poster Join Date: Apr 2008 Posts: 4,525 Member: 759168 Status: Offline Thanks Meter: 12,866	Debug Menu: Menu(hold 2sec)+0, 6725 or 9720 or 1973 or 0415 Debug Menu: Menu+0(hold 2sec), 6725 or 9720 or 1973 or 0415

03-21-2009, 09:24	#15 (permalink)
samirov-gsm No Life Poster Join Date: Apr 2008 Posts: 4,525 Member: 759168 Status: Offline Thanks Meter: 12,866	Samsung N356 (India version) Nam Programming: Test Mode: Menu, 5, down arrow, * Test Mode: **00## (in some flashes)