Samsung E3213k user lock
 

any one please help me for remove code Samsung e3213k.

this model not yet supported by ufs , nspro & z3x. i have this 3 box only.

i got flash file. but i dont have flasher.


help need urgent.

thanks

hwk, select e3210 make info

what cable need to use.

usb or rj45 ?

i tried usb using z3x but , no success.

any one know how to make into download/emergency flash mode in this model (e3213k)

thanks for help

info can make only with hwk with rj-45 cable

thanks for reply.

now i have with me a cable by which i got this info :

Software: E3213KDDKC3
Hardware: MP 0.300
Warning, Wrong Product Selected [E3210]
Regions : India
Language: en(bn,gu,hi,kn,mr,ms,pa,ta,te)
Release : 2011 March Rev: 3
MSL Active
S/N : RVQB490796
IMEI: 357467-04-088040-3
BTID: 549B:12:0F5B6A
SIMLOCK STATUS: 4000
MAST: 14789632 [UNFREEZE]
NET : 00000000 [#SIMLOCK*NET*00000000#] Active
SUB : 00000000 [#SIMLOCK*SUB*00000000#]
SP : 00000000 [#SIMLOCK*SP*00000000#]
CP : 00000000 [#SIMLOCK*CP*00000000#]
SIM : 00000000 [#SIMLOCK*SIM*00000000#]
#SIMLOCK*ACT#
#SIMLOCK*AUNET#
#SIMLOCK*AUSUB#
#SIMLOCK*AUSP#
#SIMLOCK*AUCP#
#SIMLOCK*AUSIM#



i tried for Unlock :

MSL Active
MSL Active
SIMLOCK STATUS: 4000
MAST: 14789632 [UNFREEZE]
SLOCK Reset, Ok
Unlock Done



Also tried for reset mmi :

MSL Active
CUSTOM Reset, Ok




But still my problem not solved.

any other way.


thank for your help.

enter this sequence:
#SIMLOCK*NET*00000000#

if above not works flash phone with hwk,
using same cable e3210 selected

how to enter this code ?

after power on, set asking for password only,

taking only digits.


how to enter : *net*

Mate you have to enter only that code you have read first try 00000000 if not succeed enter your UNFREZZ code 14789632 .


WBR

i tried but no result.

even now flashing done ,

but same, after set power on asking for password .

strange
try reset MMI but with
Enable Default Reset box ticked

Tried but again no luck

info:

MSL Active
CUSTOM Reset, Ok
DEFAULTS Reset, Ok

so try flash other firmware
on hwk support have some arabic files

Finally my problem solved

*2767*3855# solved my problem.

I tried above method at first when i received this handset, but that time it was asking for code.

So i think for reset user code for this handset , steps will be :-

1. Full flash

2. then use *2767*3855#

my special thanks to Mr. Major-t & Mr. Nkhan for their support till the problem solved.

Thanks

Very Simple Way to Unlock E3123K BY USING Z3X BOX, SELECT E3210 AND CONNECT WITH RJ45 CABLE(C3303). I HAVE DONE IT SUCCESSFULLY AND HERE IS THE LOG..
Selected model: E3210
Selected com port: COM10
Selected speed port: 921600
Please, connect phone and press power button 3 seconds
Phone Detected
Phone in TAT MODE
Phone IMEI: 35746704168886
Phone SW: E3213KDDKD1
Phone BT ADDR: CC05-1B-330774
Phone SN: RUVB423578
All code change to -> 00000000
If phone lock enter code -> 00000000
Unlock - ok
Elapsed time: 30 second, sw ver: 3.5.0027