samsung i9105p can't on newbie here need help pls!!! - GSM-Forum

welking1991 · 06-28-2013, 05:44

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.35, JTAG Manager Version: 1.49
Selected Resurrector: [Samsung I9105P V1.0.4905.50530]

Connecting to the dead body...OK
Detected dead body ID: 0x4BA00477 - CORRECT!
Set I/O Voltage reads as 1.80V, TCK Frequency is 1 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (M8G1WA, 0x0001D2000000 Bytes = 7.28 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (M8G1WA, 0x000000200000 Bytes = 2.00 MB)

Selected Resurrection Data for the eMMC Chip with Capacity = 7.28GB

Flashing the dead body...
WARNING: Programming Error (0x25) at 0x000000F00000 is handled as Cut Excess.
ERROR: DCC Loader has reported Error Code = 0x3E (0x007FFF <> 0x008000)

SEMEN · 07-01-2013, 09:18

I have the same problem phone was work fine before wrong flash ,

HOw i can repear this?

06-28-2013, 05:44	#1 (permalink)
welking1991 Freak Poster Join Date: Feb 2010 Posts: 261 Member: 1242437 Status: Offline Thanks Meter: 18	samsung i9105p can't on newbie here need help pls!!! Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.35, JTAG Manager Version: 1.49 Selected Resurrector: [Samsung I9105P V1.0.4905.50530] Connecting to the dead body...OK Detected dead body ID: 0x4BA00477 - CORRECT! Set I/O Voltage reads as 1.80V, TCK Frequency is 1 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (M8G1WA, 0x0001D2000000 Bytes = 7.28 GB) Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (M8G1WA, 0x000000200000 Bytes = 2.00 MB) Selected Resurrection Data for the eMMC Chip with Capacity = 7.28GB Flashing the dead body... WARNING: Programming Error (0x25) at 0x000000F00000 is handled as Cut Excess. ERROR: DCC Loader has reported Error Code = 0x3E (0x007FFF <> 0x008000)

07-01-2013, 09:18	#2 (permalink)
SEMEN No Life Poster Join Date: Aug 2006 Location: Always Here Age: 37 Posts: 1,678 Member: 333494 Status: Offline Sonork: 100.1607053 Thanks Meter: 190	I have the same problem phone was work fine before wrong flash , HOw i can repear this?