Try to Flash from I600 to I607 Big problems!!!!

[jafangie]

Hello everybody,

I have just flashed from a French version (I600GCXX4) on my SGH-i600 to a USA operator download v1.2 (SGH-i607) for Xcingular Blackjack.

Why you may ask... I just wanted to see the I 607 version 's differences before to flash with the I600GCXX6.

During the flash process, everything was OK. The 3 digit counter kept running, before i removed the battery.

Now, I lost the wifi, all the sound, the bluetooth etc....

Also, I can not connect at all, no Activesync, no explorer.... Nothing.

When I try the Bootloader mode, I have only :
*USB Downloader-Xcingular V1.2
[Phone] Active OFF

I have tried to download the modem driver and lot of things but I can do nothing. The phone is not detected by my computer on USB.

I think that I have to replace the boot loader! Perhaps with the MicroSD....

Can someone please help me!

In advance thanks a lot

Jafangie

[asmallbee]

Hi Jafangie,

I am Martin which has got the same problem with you. I am going to use JTAG method to reload the open v1.1 bootloader. Do you have some ways to find the service manual of this device and find out the actual JTAG points / pins?

If yes, please share it with me. I am building by own JTAG cable right now.

Thanks,

Martin Wong

[jafangie]

Hi Martin,
Today I ve find nothing... My phone is always dead!

I tried to change all the registry, the boot.Rgu and boot.hv, the file system. I copied all these files on one mobile I600 Asia, spent lot of times, but actually nothing!

But I don't know the method you are speaking, I have a look and i will contact you.

Alain

[winVISTA]

Can force the open regconize by USB for flashing, but can not flash the PHONE part! Still fining solution.

[jafangie]

Hi Winvista,
How do you force to recognize the mobile with USB, please tell me that!
Thanks!

[jafangie]

Hi Winvista,
I can also force with Modem, but when I turn off the mobile, I lost connection, when I turn on, it does'nt recognize it!!!!

[toanhung]

can you guy share some info ? i got to the same problem

[toanhung]

hey winVISTA how do you force usb flashing. I need to flash the bootloader to cingular again. accidently flash i600 rom. Thank you for any help

[galinhola]

Same problem here.

Did you find a solution ?

The computer doesn recognize my phone.

Best Regards

Luis,

[toanhung]

been try to ask but no body answer.

[joeygsm]

Please explain how to force usb for flashing. Mines says Open 1.1 , I need it to say cingular.

[borowan]

I get the same
USB Downloader-Xcingular V1.2
Then does nothing.
When i start the phone it start booting up the says good bye then turn on.

[bj_is_home]

Once you saw "Phone Active: OFF", just wait for about an hour. Why, just to wait for TimeOut.

After TimeOut, the OLD code wll be executed and the phone will be back ON but no upgrade.

Merry Xmas.

I607 owner

[decoze]

Originally Posted by bj_is_home

Once you saw "Phone Active: OFF", just wait for about an hour. Why, just to wait for TimeOut.

After TimeOut, the OLD code wll be executed and the phone will be back ON but no upgrade.

Merry Xmas.

I607 owner

I've tried, yes, it's time out as you said but then it's just boot the phone up and turn it off automatically as usual.

So, I'm just wondering what do you mean by OLD code will be executed?

Thanks anyway!

I607 Firmware on I600 owner

[chirola31]

I have the same problem, but for repair you problem maybe with this---------------------> http://www.cellcorner.com/xshp/unloc...msung-box.html



good look friend.