U600 UART flashing with OptiFlash (howto) - GSM-Forum

hacktek · 03-19-2012, 22:03

I have a SGH-U600b phone, and suddenly after I put this code in phone *#0*# wich is a test code, I could not quit this menu until pull out the battery.
After that, when I power on the phone, just white leds are on... I tryed to flash it, but I did not found any way to make it to connect to OptiFlash or to NsPro Box, for flashing. The phone don't want to enter in download mode, *+Power and *+C don't work...
I have flashed it successfuly yesterday, it has entered in download mode and flashed successfully with NsPro, and with OptiFlash using USB.
I have heard that UART flashing with OptiFlash is possible..
I have this cable. I have only USB on my laptop, I don't have serial RS232 ports. Can this phone be flashed?

soshan · 03-22-2012, 22:53

if u use opti flasher run flasher then option>setting> generic> harwarde platform >
set: Customer T: D830/D840/D910/X840/ECLAIR TFS16(UARTs)
then set com interface then start flashing.

03-19-2012, 22:03	#1 (permalink)
hacktek No Life Poster Join Date: Aug 2004 Location: România Posts: 991 Member: 76629 Status: Offline Thanks Meter: 76	U600 UART flashing with OptiFlash (howto) I have a SGH-U600b phone, and suddenly after I put this code in phone #0# wich is a test code, I could not quit this menu until pull out the battery. After that, when I power on the phone, just white leds are on... I tryed to flash it, but I did not found any way to make it to connect to OptiFlash or to NsPro Box, for flashing. The phone don't want to enter in download mode, +Power and +C don't work... I have flashed it successfuly yesterday, it has entered in download mode and flashed successfully with NsPro, and with OptiFlash using USB. I have heard that UART flashing with OptiFlash is possible.. I have this cable. I have only USB on my laptop, I don't have serial RS232 ports. Can this phone be flashed?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Seeking for flash nokia 5110 old version (3 version) can exchange for new	Tomas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	10-14-2017 19:29
5110 flash new software , need help	steve	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	01-03-2015 05:41
Help with 6110	paulomt1	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	05-25-2009 16:29
Netmonitor with FBus????	ratzfatz	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	06-09-1999 17:04

03-22-2012, 22:53	#2 (permalink)
soshan No Life Poster Join Date: Sep 2007 Location: iran-shushtar Posts: 3,552 Member: 592636 Status: Offline Thanks Meter: 674	if u use opti flasher run flasher then option>setting> generic> harwarde platform > set: Customer T: D830/D840/D910/X840/ECLAIR TFS16(UARTs) then set com interface then start flashing.