MC 939 FF3.1N problems HELP NEEDED - GSM-Forum

askuqi · 07-03-2003, 23:21

I have a MC939 V FF3.1N
After trying to unlock wit SAGEM SERVICE SOFTWARE by rasvanelgsm the phone didn´t recognize the sim card
and have a strange IMEI 33000000000-1

If anyone can tell me a solutin please tell me...

**.:hack3r2k:.** · 07-04-2003, 21:11

Hi there...

Don't use s/h/i/t/t/y patched version of that prog. that was originally created by RazvanelGSM with little help from my side

So use the f/u/c/k/i/n' "original" version without any modification/adds from some so called psedo crackers...A BIG F/U/C/K goes to all of you that like to put your name in our prog...

MUIE

best regards,
.:hack3r2k:.

essojay · 07-04-2003, 21:20

Where is the "original"

**.:hack3r2k:.** · 07-04-2003, 21:30

I think that an unmodified version is available on sagemdoctor group...

best regards,
.:hack3r2k:.

Contact : icq#: 157715181 for help

askuqi · 07-05-2003, 17:29

I brought the phone to some one that is more expert than me and he resolve the problem of IMEI (he put the original IMEI) and now the phone recognise the SIM card but now it is another prob.
Whe i put the SIM and enter the PIN code the phone give me the mesage ERROR READING THE EE MODULE 5137 and the man said me that the phone have the epprom damaget phisically.

Can this be true???

**.:hack3r2k:.** · 07-05-2003, 19:23

I guess he wrote a new incompatible/bad eeprom to the phone and now the sagem os has problem getting data from it... Try to write a good backup and if the problem still remains the same that guy could be right thing that i doubt of it...

best regards,
.:hack3r2k:.

P.S: Phisically damadged !? LOL

07-05-2003, 23:11

HAMMER soution was used, clearly.

ayhan · 07-14-2003, 16:30

sim verrou on display! to sagem mc 939 .how can i repair it?...

07-03-2003, 23:21	#1 (permalink)
askuqi Junior Member Join Date: Jul 2003 Posts: 14 Member: 33065 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	MC 939 FF3.1N problems HELP NEEDED I have a MC939 V FF3.1N After trying to unlock wit SAGEM SERVICE SOFTWARE by rasvanelgsm the phone didn´t recognize the sim card and have a strange IMEI 33000000000-1 If anyone can tell me a solutin please tell me...

07-04-2003, 21:11	#2 (permalink)
.:hack3r2k:. Product Manager Join Date: Aug 2002 Location: FuriouSTeaM Posts: 34,290 Member: 15022 Status: Online Sonork: 100.53452 Thanks: 372 Thanked 33,366 Times in 5,093 Posts	Heh... Hi there... Don't use s/h/i/t/t/y patched version of that prog. that was originally created by RazvanelGSM with little help from my side So use the f/u/c/k/i/n' "original" version without any modification/adds from some so called psedo crackers...A BIG F/U/C/K goes to all of you that like to put your name in our prog... MUIE best regards, .:hack3r2k:.

07-04-2003, 21:30	#4 (permalink)
.:hack3r2k:. Product Manager Join Date: Aug 2002 Location: FuriouSTeaM Posts: 34,290 Member: 15022 Status: Online Sonork: 100.53452 Thanks: 372 Thanked 33,366 Times in 5,093 Posts	Hi :) I think that an unmodified version is available on sagemdoctor group... best regards, .:hack3r2k:. Contact : icq#: 157715181 for help

07-05-2003, 19:23	#6 (permalink)
.:hack3r2k:. Product Manager Join Date: Aug 2002 Location: FuriouSTeaM Posts: 34,290 Member: 15022 Status: Online Sonork: 100.53452 Thanks: 372 Thanked 33,366 Times in 5,093 Posts	Don't think so... I guess he wrote a new incompatible/bad eeprom to the phone and now the sagem os has problem getting data from it... Try to write a good backup and if the problem still remains the same that guy could be right thing that i doubt of it... best regards, .:hack3r2k:. P.S: Phisically damadged !? LOL

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-04-2003, 21:20	#3 (permalink)
essojay No Life Poster Join Date: Jul 2002 Posts: 3,604 Member: 13808 Status: Offline Thanks: 0 Thanked 159 Times in 58 Posts	Where is the "original"

07-05-2003, 17:29	#5 (permalink)
askuqi Junior Member Join Date: Jul 2003 Posts: 14 Member: 33065 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	I brought the phone to some one that is more expert than me and he resolve the problem of IMEI (he put the original IMEI) and now the phone recognise the SIM card but now it is another prob. Whe i put the SIM and enter the PIN code the phone give me the mesage ERROR READING THE EE MODULE 5137 and the man said me that the phone have the epprom damaget phisically. Can this be true???

07-05-2003, 23:11	#7 (permalink)
legija Guest Posts: n/a Member:	HAMMER soution was used, clearly.

07-14-2003, 16:30	#8 (permalink)
ayhan Junior Member Join Date: Nov 2002 Location: turkey Age: 46 Posts: 2 Member: 18016 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	sim verrou on display! to sagem mc 939 .how can i repair it?...

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
S40 SMS problem - help needed	jazzzy	NON Siemens Brand (ODM Phones)	3	09-17-2004 12:30
T191 illegal software...BIG PROBLEM...HELP NEEDED	jjogola	ODM (Original Design Manufacturing)	6	08-15-2003 01:27
Security Code problem help needed very urgently	Meam	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	9	09-21-2001 06:13
Philips OZEO Problem , help needed	bobik	Philips	0	05-23-2001 18:22
Please, anyone with MW 939 FF3,1N !	dankec	Infineon C16X M51 & ARM7 M52 BASED	0	04-18-2001 15:41