MY3026, is there a free solution to unlock it? - GSM-Forum

mourad_t · 08-03-2003, 21:02

Hi

I have one MY3026 unlocked, does exist any soft to unlock it? like reading some eeprom fields (0, 191, 251...) and using other soft like Chris922... any solution?
I will try to post some information of MY3026, in "Logfile & Code requests > Phone Unlocking Codes & Maps" Section.

Thanks in advance...

BLIDA · 08-03-2003, 21:33

if you need sagem dongle or log via server contact me i can help you .

wbr BLIDA

frenchi · 08-03-2003, 22:00

did u try free soft by Chris ?

WBR
frenchi

Aishur · 08-03-2003, 22:17

Hi Mates

1-Try to have a log of your handy, you can use sagem logger version 6. you can also have manually desired data by entering mm3 code.

2 - Use an Id calculator like chris' calc422 or Lord's one.

If your phone firmware is 4,x , the best way is to use the new chris 30xx id reader.

It is so simple else post here your data.

Best regards
Aishur

mourad_t · 08-04-2003, 18:21

Hi

I didn't use Chris922 yet, I don't know how? Iwill try...

Here is some data of MY3026, if someone can calculate it for me...

Thanks in advance

mourad_t · 08-05-2003, 15:50

Hi, and Thanks to All your help...

My MY3026 is now unlocked:
1. Enter to MM3 Mode (*226632623?0 Ok) to read fields 0 and 191.
2. Use software 30xx Infineonn to get ID:
a. Connect phone to cable without battery.
b. Click -connect-.
c. Click -boot- "Insert battery" then insert battery to phone, you will see the progress bar "OK... What do you want to do today"
d. Click on -get phoneID- then wait, another progress bar start, in the end, you'll get the ID phone "ID**********".
* If not conect or progress bar (when getting ID) freeze, try to change the speed.
3. Use a calculator Sagem calculator by logs, input these data and press -calculate-, finally you'll get the code.

Thanks to Ozcom.

Siemens man · 08-05-2003, 19:48

wich calculator do you use????

mourad_t · 08-06-2003, 00:33

Calculator: All Sagem calculator by logs. Fu**ed by hacker1.

I forgot about HashTable: Read it with Sagem 2k2 Logger, in calculator: select the hash Hxx.

Siemens man · 08-06-2003, 19:27

hi man
i'm need this soft too. where ican find?? please help me

Quote:

Originally posted by mourad_t
Calculator: All Sagem calculator by logs. Fu**ed by hacker1.

I forgot about HashTable: Read it with Sagem 2k2 Logger, in calculator: select the hash Hxx.

thank you for help

Siemens man · 08-10-2003, 19:55

hi man
this solution work in my3026 ver dh3,5h???????????? for me not work

Quote:

Originally posted by mourad_t
Hi, and Thanks to All your help...

My MY3026 is now unlocked:
1. Enter to MM3 Mode (*226632623?0 Ok) to read fields 0 and 191.
2. Use software 30xx Infineonn to get ID:
a. Connect phone to cable without battery.
b. Click -connect-.
c. Click -boot- "Insert battery" then insert battery to phone, you will see the progress bar "OK... What do you want to do today"
d. Click on -get phoneID- then wait, another progress bar start, in the end, you'll get the ID phone "ID**********".
* If not conect or progress bar (when getting ID) freeze, try to change the speed.
3. Use a calculator Sagem calculator by logs, input these data and press -calculate-, finally you'll get the code.

Thanks to Ozcom.

thank you

mourad_t · 08-10-2003, 21:31

What's wrong? can't read ID?

Siemens man · 08-10-2003, 22:35

yes. i can't read ID. please help me

Quote:

Originally posted by mourad_t
What's wrong? can't read ID?

thank you

Siemens man · 08-10-2003, 22:39

my phone hash tabel is 28. calculator work in hashtable 27. not work in 28

MKunlocking · 08-11-2003, 07:12

siemens man put your email address and i will send you
my solution

Siemens man · 08-11-2003, 11:13

hi man
thank you for reply. my mail is: [email protected]
thank you for help

08-03-2003, 21:02	#1 (permalink)
mourad_t No Life Poster Join Date: Apr 2003 Location: Algeria Age: 41 Posts: 952 Member: 26438 Status: Offline Thanks Meter: 8	MY3026, is there a free solution to unlock it? Hi I have one MY3026 unlocked, does exist any soft to unlock it? like reading some eeprom fields (0, 191, 251...) and using other soft like Chris922... any solution? I will try to post some information of MY3026, in "Logfile & Code requests > Phone Unlocking Codes & Maps" Section. Thanks in advance...

08-05-2003, 15:50	#6 (permalink)
mourad_t No Life Poster Join Date: Apr 2003 Location: Algeria Age: 41 Posts: 952 Member: 26438 Status: Offline Thanks Meter: 8	MY3026 unlocked... Hi, and Thanks to All your help... My MY3026 is now unlocked: 1. Enter to MM3 Mode (226632623?0 Ok) to read fields 0 and 191. 2. Use software 30xx Infineonn to get ID: a. Connect phone to cable without battery. b. Click -connect-. c. Click -boot- "Insert battery" then insert battery to phone, you will see the progress bar "OK... What do you want to do today" d. Click on -get phoneID- then wait, another progress bar start, in the end, you'll get the ID phone "ID********". If not conect or progress bar (when getting ID) freeze, try to change the speed. 3. Use a calculator Sagem calculator by logs, input these data and press -calculate-, finally you'll get the code. Thanks to Ozcom.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Is there any free solution to repair imei 099999-00-123456-0 in C62 ??	zahyr	NON Siemens Brand (ODM Phones)	20	12-16-2008 12:32
is there any real solution to unlock 902???	firstline	Sharp	0	05-12-2005 19:22
Is There Any Free Software To Unlock T200	Babak	Sony Ericsson	4	04-23-2004 21:32
is there a free sw to unlock x100?	infogsm	SYSOL Platform	6	03-09-2004 16:07
BF4 10e KJ12B, is there a free solution to unlock?	mourad_t	BF, BG, TH, BHx Series	0	08-07-2003 14:28

08-03-2003, 21:33	#2 (permalink)
BLIDA No Life Poster Join Date: Sep 2002 Location: ALGERIA Posts: 1,716 Member: 15439 Status: Offline Sonork: 100.43816 Thanks Meter: 52	if you need sagem dongle or log via server contact me i can help you . wbr BLIDA

08-03-2003, 22:00	#3 (permalink)
frenchi No Life Poster Join Date: Oct 1999 Location: France Age: 46 Posts: 573 Member: 570 Status: Offline Thanks Meter: 18	did u try free soft by Chris ? WBR frenchi

08-03-2003, 22:17	#4 (permalink)
Aishur Banned Join Date: May 2003 Location: www.CentralMobile.net/vbb Posts: 1,654 Member: 28188 Status: Offline Thanks Meter: 579	Hi Mates 1-Try to have a log of your handy, you can use sagem logger version 6. you can also have manually desired data by entering mm3 code. 2 - Use an Id calculator like chris' calc422 or Lord's one. If your phone firmware is 4,x , the best way is to use the new chris 30xx id reader. It is so simple else post here your data. Best regards Aishur

08-04-2003, 18:21	#5 (permalink)
mourad_t No Life Poster Join Date: Apr 2003 Location: Algeria Age: 41 Posts: 952 Member: 26438 Status: Offline Thanks Meter: 8	Hi I didn't use Chris922 yet, I don't know how? Iwill try... Here is some data of MY3026, if someone can calculate it for me... Thanks in advance

08-05-2003, 19:48	#7 (permalink)
Siemens man No Life Poster Join Date: Apr 2001 Location: IN CASTLE Age: 46 Posts: 5,798 Member: 3925 Status: Offline Thanks Meter: 22	wich calculator do you use????

08-06-2003, 00:33	#8 (permalink)
mourad_t No Life Poster Join Date: Apr 2003 Location: Algeria Age: 41 Posts: 952 Member: 26438 Status: Offline Thanks Meter: 8	Calculator: All Sagem calculator by logs. Fu**ed by hacker1. I forgot about HashTable: Read it with Sagem 2k2 Logger, in calculator: select the hash Hxx.

08-10-2003, 21:31	#11 (permalink)
mourad_t No Life Poster Join Date: Apr 2003 Location: Algeria Age: 41 Posts: 952 Member: 26438 Status: Offline Thanks Meter: 8	What's wrong? can't read ID?

08-10-2003, 22:39	#13 (permalink)
Siemens man No Life Poster Join Date: Apr 2001 Location: IN CASTLE Age: 46 Posts: 5,798 Member: 3925 Status: Offline Thanks Meter: 22	my phone hash tabel is 28. calculator work in hashtable 27. not work in 28

08-11-2003, 07:12	#14 (permalink)
MKunlocking Freak Poster Join Date: May 2003 Posts: 263 Member: 29496 Status: Offline Thanks Meter: 0	siemens man put your email address and i will send you my solution

08-11-2003, 11:13	#15 (permalink)
Siemens man No Life Poster Join Date: Apr 2001 Location: IN CASTLE Age: 46 Posts: 5,798 Member: 3925 Status: Offline Thanks Meter: 22	hi man thank you for reply. my mail is: [email protected] thank you for help