SAGEM MC922 Pb 3 eeprom - GSM-Forum

olivium · 08-04-2005, 19:37

My sagem display Pb 3 EEPROM;
I have as soft SAGEM SERVICE V2.5.
When i read the phone:
Testing 4800 speed ...Found!!
open communication with phone
please wait ....reading info in progress
FIRMWARE read ...ok
IMEI read ...ok
Phone code ....ok
Old version detected...
code(s) genrated succesfull
please wait...repairing in progress

i wait 10 mn but nothing and the Imei don't display in phone information.

What is wrong ?
PLS help me!!!

essojay · 08-04-2005, 19:45

Quote:

Originally Posted by olivium

My sagem display Pb 3 EEPROM;
I have as soft SAGEM SERVICE V2.5.
When i read the phone:
Testing 4800 speed ...Found!!
open communication with phone
please wait ....reading info in progress
FIRMWARE read ...ok
IMEI read ...ok
Phone code ....ok
Old version detected...
code(s) genrated succesfull
please wait...repairing in progress

i wait 10 mn but nothing and the Imei don't display in phone information.

What is wrong ?
PLS help me!!!

its only if this phone is so precious to you that you can go through the process of fixing it.. you may need to remove the eeprom on phone program it with good eeprom and then recalculate checksum.

thats a process and its quite invloving..

bR

ROUGHNECK · 08-04-2005, 20:03

Quote:

Originally Posted by essojay

its only if this phone is so precious to you that you can go through the process of fixing it.. you may need to remove the eeprom on phone program it with good eeprom and then recalculate checksum.

thats a process and its quite invloving..

bR

hi mate

what essojay means is that get a pony programming for the job
i think its more easier and better
and you dont need to remove eeprom
but to read and write good bin
thx

olivium · 08-04-2005, 20:36

How to do to have a good eeprom and what i will use to write eeprom or programm it.

***acyl2000*** · 08-05-2005, 05:06

u can use pony programming,lab tool or any ic programer to write the ic

kb501x · 08-05-2005, 08:09

For the bin file to use you can check on hack3r2k site under download section.

good luck

olivium · 08-09-2005, 20:21

Quote:

Originally Posted by kb501x

For the bin file to use you can check on hack3r2k site under download section.

good luck

Pls can you give me the correct adress.

08-04-2005, 19:37	#1 (permalink)
olivium Insane Poster Join Date: Jun 2005 Location: Ivory Coast Age: 47 Posts: 92 Member: 155755 Status: Offline Thanks Meter: 3	SAGEM MC922 Pb 3 eeprom My sagem display Pb 3 EEPROM; I have as soft SAGEM SERVICE V2.5. When i read the phone: Testing 4800 speed ...Found!! open communication with phone please wait ....reading info in progress FIRMWARE read ...ok IMEI read ...ok Phone code ....ok Old version detected... code(s) genrated succesfull please wait...repairing in progress i wait 10 mn but nothing and the Imei don't display in phone information. What is wrong ? PLS help me!!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SAGEM MC922 pony-prog EEPROM-images?	Mike.Joohsen	Sagem Hardware Repair Area	5	03-14-2003 11:24
Need Help segam 920 pb 3 EEPROM how to repair	gsnbhagawan	Infineon C16X M51 & ARM7 M52 BASED	0	04-03-2001 07:14
sagem mc93x PB 3 eeprom	GsmSolution	Infineon C16X M51 & ARM7 M52 BASED	1	03-29-2001 23:58
sagem 912 says "PB 3 EEPROM"	tanja1	Infineon C16X M51 & ARM7 M52 BASED	0	12-21-2000 18:47
PB 3 EEPROM	sashpeto	Infineon C16X M51 & ARM7 M52 BASED	5	08-20-2000 08:39

08-04-2005, 20:36	#4 (permalink)
olivium Insane Poster Join Date: Jun 2005 Location: Ivory Coast Age: 47 Posts: 92 Member: 155755 Status: Offline Thanks Meter: 3	How to do to have a good eeprom and what i will use to write eeprom or programm it.

08-05-2005, 05:06	#5 (permalink)
*acyl2000* Super Moderator Join Date: Aug 2000 Location: Malaysia Posts: 2,809 Member: 1922 Status: Offline Sonork: 100.64645 Thanks Meter: 692	u can use pony programming,lab tool or any ic programer to write the ic

08-05-2005, 08:09	#6 (permalink)
kb501x Freak Poster Join Date: Feb 2004 Age: 63 Posts: 213 Member: 52276 Status: Offline Thanks Meter: 0	For the bin file to use you can check on hack3r2k site under download section. good luck