F.A.Q About Sagem Read Before Making Thread. - GSM-Forum

stanner_austin · 09-29-2007, 15:23

Here Is Little Info About Sagem Phones..
Unlock, Connection Method, Editing Eeprom, Setting Speed And Many More.

1 How Can I Connect My Sagem Phone With Pc?
A. You Have To Use Sagem USB Data Cable Or Sagem Serial Cable To Connect Any Sagem Phone.

2 Connected Phone But Software Not Read It Why?
A. Sagem Have Special Speed Setting At Eeprom & Firmware.. If Speed Not "19200" “115200" Like That Some Software Not Detect It.

3 How To Set Sagem Speed To 19200?
A. Easy, First Start Phone Use Serial Cable Connect It To Phone.
Open Software Sagem tool. Link Is Here. Select Com Port Its Work Stable In Com1 Only. Select Speed To 19200 And Press Set.
Now U See "Baud rate 19200 Set" Means Its Set In Firmware Only.
Yes Only At Firmware If U Off And On It Its Lost...
To Set Is For Ever We Have To Edit At Eeprom. Now We Have 19200 Set In Firmware Open Sag Doc. Link Is Here.
Its Work Stable In Com1 Only.
Select Your Port Com1.
Select Ur Speed By Pressing "B" Set To 19200 Because We Used Same To Set In Firmware.
Now Go To Edit Eeprom Field “Or Press 5”Type "Field Number 147"(This Is Field Have Speed Value.) Enter. Now U Can See Its Show Existing Value. Replace It With "12" = (19200 Its Mean) And Press Enter And Then Its Ask You Confirmation Press "Y" = (Yes)
Now Done Your Phone Speed Set To "19200" Now U Can Read Phone with Tools at This Speed.

4 How Do I Can Reset Phone Code For Sagem?
A. Do Speed Setting First U Can See At Point 3. Go To Edit Eeprom Fields Type Field Number "100"(This Field Value = Phone Code) Now U Can See There 4 Numbers Like "12 34 Ff Ff" =(2143) Most Important Thing We Have To Set First 4 Digit Only Don't Remove Last "Ff Ff" Or This Field Get Corrupted. So I Replaced It With 0000 So Its Look Like This "00 00 Ff Ff" Press Enter And Y = Yes Done Your Code Reset.

5 I See So Much Time When Enter Code Any Way To Reset It?
A. Yes M62 Base Phone Have Eeprom Field For Timer Value.
Field Number "102" Timer Value. F.E. If We See At Phone " 02 00 00 00 = (Means Its Have 2 Try So 60sec Is Timer) We Just Have To Replace With All Zero Like This " 00 00 00 00" Now Ur Timer Is Zero.

6 How Do I Know My Phone Is Able To Unlock Without Opening It?
A. Sagem Are Secure Phone Always Its Base On Calculation. We Need Fields If U Have Unprotected Fields Then Its Possible To Calculate. Like Field 0 ,Field 5709,Field 191. Many Phone Have Field Protected So Only Via Is JTAG Adapter Base Solution. Some Phone Have Non Protected They Can Be Unlocked Just Read This Following Fields And Post Here

7 How to Change LCD Contrast without Going in Phone Setting?

A. Simple Again Eeprom Field Editing... First Be Sure Your Phone Speed Setting Correct And Its Able To Read With Sag Doc. U Can Read Point 3 For Speed Setting.
Open Sag Doc Select Port Go To Edit Eeprom Field Type Field Number "221" = (This Field Hold Value for LCD Contrast)
Now U Get Result. F.E. "B1 01" = (Means Ur Bit1 Value Set To Zero) You Can See U Get Low Contrast.
So Update Value With 1 To 9 Any Digit Only. F.E "B1 07" Now Your LCD Setting Is Correct And Able To View...

HOPE THIS MAY HELP ALL.

best regards
Gopal Chevli.

DaysGSM · 09-29-2007, 15:27

Allwais in the TOP buddy ...

Keep it going ....

Regards,
DaysGSM ®

maheshsaiganesh · 09-29-2007, 15:29

Thanks sir nice info.......................

.:Kuku:. · 09-29-2007, 15:30

Thanks & Good Work As Always

Keep It Up

WBR
Kuku

~AKSingh~ · 09-29-2007, 15:31

well exellent work @Gopal Chevli keep it work

wbr
aksingh

akhil_bbsr · 09-29-2007, 15:36

great man ...with great share

amitks_in · 09-29-2007, 15:36

always with good info !!

Br.

Amit

shantilal · 09-29-2007, 15:37

good information mr. stanner austin thanks for shareing
wbr
shantilal

rajiv007 · 09-29-2007, 15:43

you are rock all the time

good info bro

shamsheerdurg · 09-29-2007, 16:04

sir what is the box required for unlocking sagem 202 /201

vozice_09 · 02-15-2008, 08:14

ad 3) faster way is use Astu.exe - connect phone, select com port and Make log. After it phone is set to 19200 bauds

vozice_09 · 02-15-2008, 08:19

next tip for you:

Activate SMS character counter (in our country was many X5-2, X-6 and X-7 phones which had this function disabled in firmware):

edit field 16138 (field have mostly value 12 00 - it depend if you enable sms delivery, zoom for sms reading,...). If you change this field to 42 00 and restart phone - you get sms character counter.

It works for 95% X-6 and X-7. X-5 I mean that you need 3.9 firmware

llcoolr · 02-16-2008, 09:59

thanks a lot u helped me with a non connecting X2-2 with sepped at 1200 and i set it back to 19200

vozice_09 · 03-14-2008, 12:14

Next one small tip:

when you need make full eeprom backup - its better use full speed 115200 bauds. If you are not able enter menu (sim missing, other error) - first use astu.exe and make log. shutdown astu (speed is set to 19200), start sagem doctor (or Sagem toolbox by Chris), change field 147 to 9D and restart phone. Now start sagem doctor, choose com port, set speed to 115200 and make backup

debmobile · 06-07-2008, 21:19

but what cable or rx, tx we are use ????????????????

09-29-2007, 15:23	#1 (permalink)
stanner_austin No Life Poster Join Date: Jan 2004 Location: Unknown Age: 39 Posts: 9,227 Member: 49752 Status: Offline Sonork: QQ:1474246528 Thanks Meter: 6,085	F.A.Q About Sagem Read Before Making Thread. Here Is Little Info About Sagem Phones.. Unlock, Connection Method, Editing Eeprom, Setting Speed And Many More. 1 How Can I Connect My Sagem Phone With Pc? A. You Have To Use Sagem USB Data Cable Or Sagem Serial Cable To Connect Any Sagem Phone. 2 Connected Phone But Software Not Read It Why? A. Sagem Have Special Speed Setting At Eeprom & Firmware.. If Speed Not "19200" “115200" Like That Some Software Not Detect It. 3 How To Set Sagem Speed To 19200? A. Easy, First Start Phone Use Serial Cable Connect It To Phone. Open Software Sagem tool. Link Is Here. Select Com Port Its Work Stable In Com1 Only. Select Speed To 19200 And Press Set. Now U See "Baud rate 19200 Set" Means Its Set In Firmware Only. Yes Only At Firmware If U Off And On It Its Lost... To Set Is For Ever We Have To Edit At Eeprom. Now We Have 19200 Set In Firmware Open Sag Doc. Link Is Here. Its Work Stable In Com1 Only. Select Your Port Com1. Select Ur Speed By Pressing "B" Set To 19200 Because We Used Same To Set In Firmware. Now Go To Edit Eeprom Field “Or Press 5”Type "Field Number 147"(This Is Field Have Speed Value.) Enter. Now U Can See Its Show Existing Value. Replace It With "12" = (19200 Its Mean) And Press Enter And Then Its Ask You Confirmation Press "Y" = (Yes) Now Done Your Phone Speed Set To "19200" Now U Can Read Phone with Tools at This Speed. 4 How Do I Can Reset Phone Code For Sagem? A. Do Speed Setting First U Can See At Point 3. Go To Edit Eeprom Fields Type Field Number "100"(This Field Value = Phone Code) Now U Can See There 4 Numbers Like "12 34 Ff Ff" =(2143) Most Important Thing We Have To Set First 4 Digit Only Don't Remove Last "Ff Ff" Or This Field Get Corrupted. So I Replaced It With 0000 So Its Look Like This "00 00 Ff Ff" Press Enter And Y = Yes Done Your Code Reset. 5 I See So Much Time When Enter Code Any Way To Reset It? A. Yes M62 Base Phone Have Eeprom Field For Timer Value. Field Number "102" Timer Value. F.E. If We See At Phone " 02 00 00 00 = (Means Its Have 2 Try So 60sec Is Timer) We Just Have To Replace With All Zero Like This " 00 00 00 00" Now Ur Timer Is Zero. 6 How Do I Know My Phone Is Able To Unlock Without Opening It? A. Sagem Are Secure Phone Always Its Base On Calculation. We Need Fields If U Have Unprotected Fields Then Its Possible To Calculate. Like Field 0 ,Field 5709,Field 191. Many Phone Have Field Protected So Only Via Is JTAG Adapter Base Solution. Some Phone Have Non Protected They Can Be Unlocked Just Read This Following Fields And Post Here 7 How to Change LCD Contrast without Going in Phone Setting? A. Simple Again Eeprom Field Editing... First Be Sure Your Phone Speed Setting Correct And Its Able To Read With Sag Doc. U Can Read Point 3 For Speed Setting. Open Sag Doc Select Port Go To Edit Eeprom Field Type Field Number "221" = (This Field Hold Value for LCD Contrast) Now U Get Result. F.E. "B1 01" = (Means Ur Bit1 Value Set To Zero) You Can See U Get Low Contrast. So Update Value With 1 To 9 Any Digit Only. F.E "B1 07" Now Your LCD Setting Is Correct And Able To View... HOPE THIS MAY HELP ALL. best regards Gopal Chevli. Last edited by stanner_austin; 08-04-2008 at 20:18. Reason: link changed

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
★★★ Read Before Post - About Flash Files Request ★★★	SiLver GSM	SpiderMan	0	11-18-2008 05:05
.."WARNING".. about flash X540 Plz Read befor flash (Plz Read UST Team)	Sherif Rocket	UST Pro II	39	09-28-2008 22:54
KulanKendi About Sagem read flach	delta-gsm	KULANKENDI Server	1	12-06-2007 19:48
READ before post or making new thread!!!	Drug_Store	Nokia Multimedia	3	11-09-2005 16:45

09-29-2007, 15:27	#2 (permalink)
DaysGSM No Life Poster Join Date: May 2002 Location: Portugal.dll Posts: 518 Member: 11915 Status: Offline Thanks Meter: 10	Allwais in the TOP buddy ... Keep it going .... Regards, *DaysGSM ®*

09-29-2007, 15:29	#3 (permalink)
maheshsaiganesh No Life Poster Join Date: Jun 2006 Location: india Age: 47 Posts: 597 Member: 289913 Status: Offline Thanks Meter: 125	Thanks sir nice info.......................

09-29-2007, 15:30	#4 (permalink)
.:Kuku:. No Life Poster Join Date: Mar 2005 Location: Sahiwal Punjab , Pakistan Posts: 2,900 Member: 123133 Status: Offline Sonork: 100.999 Thanks Meter: 911	Thanks & Good Work As Always Keep It Up WBR Kuku

09-29-2007, 15:31	#5 (permalink)
~AKSingh~ Product Supporter Join Date: May 2004 Location: INDIA Age: 55 Posts: 2,950 Member: 65063 Status: Offline Thanks Meter: 2,419	well exellent work @Gopal Chevli keep it work wbr aksingh

09-29-2007, 15:36	#6 (permalink)
akhil_bbsr No Life Poster Join Date: May 2006 Location: MOBILE SOFTZONE BHUBANESWAR IN Posts: 3,509 Member: 271478 Status: Offline Sonork: 1590868 Thanks Meter: 1,070	great man ...with great share

09-29-2007, 15:36	#7 (permalink)
amitks_in No Life Poster Join Date: Jan 2005 Location: NEW DELHI, INDIA Age: 50 Posts: 1,688 Member: 111665 Status: Offline Sonork: 104250 Thanks Meter: 180	always with good info !! Br. Amit

09-29-2007, 15:37	#8 (permalink)
shantilal No Life Poster Join Date: Apr 2004 Location: nagaur raj Age: 57 Posts: 576 Member: 62820 Status: Offline Thanks Meter: 175	good information mr. stanner austin thanks for shareing wbr shantilal

09-29-2007, 15:43	#9 (permalink)
rajiv007 No Life Poster Join Date: Aug 2004 Age: 51 Posts: 1,064 Member: 78767 Status: Offline Sonork: 100.95137 Thanks Meter: 566	you are rock all the time good info bro

09-29-2007, 16:04	#10 (permalink)
shamsheerdurg Junior Member Join Date: Sep 2006 Posts: 17 Member: 349389 Status: Offline Thanks Meter: 0	sir what is the box required for unlocking sagem 202 /201

02-15-2008, 08:14	#11 (permalink)
vozice_09 No Life Poster Join Date: Jul 2002 Location: Czech Republic Age: 45 Posts: 505 Member: 13439 Status: Offline Thanks Meter: 14	ad 3) faster way is use Astu.exe - connect phone, select com port and Make log. After it phone is set to 19200 bauds

02-15-2008, 08:19	#12 (permalink)
vozice_09 No Life Poster Join Date: Jul 2002 Location: Czech Republic Age: 45 Posts: 505 Member: 13439 Status: Offline Thanks Meter: 14	next tip for you: Activate SMS character counter (in our country was many X5-2, X-6 and X-7 phones which had this function disabled in firmware): edit field 16138 (field have mostly value 12 00 - it depend if you enable sms delivery, zoom for sms reading,...). If you change this field to 42 00 and restart phone - you get sms character counter. It works for 95% X-6 and X-7. X-5 I mean that you need 3.9 firmware

02-16-2008, 09:59	#13 (permalink)
llcoolr No Life Poster Join Date: Feb 2004 Location: DZ W09 Age: 43 Posts: 3,607 Member: 53408 Status: Offline Sonork: 100.1593951 Thanks Meter: 1,261	thanks a lot u helped me with a non connecting X2-2 with sepped at 1200 and i set it back to 19200

03-14-2008, 12:14	#14 (permalink)
vozice_09 No Life Poster Join Date: Jul 2002 Location: Czech Republic Age: 45 Posts: 505 Member: 13439 Status: Offline Thanks Meter: 14	Next one small tip: when you need make full eeprom backup - its better use full speed 115200 bauds. If you are not able enter menu (sim missing, other error) - first use astu.exe and make log. shutdown astu (speed is set to 19200), start sagem doctor (or Sagem toolbox by Chris), change field 147 to 9D and restart phone. Now start sagem doctor, choose com port, set speed to 115200 and make backup

06-07-2008, 21:19	#15 (permalink)
debmobile No Life Poster Join Date: May 2008 Location: COME & MADE GREEN WORLD Posts: 3,092 Member: 771937 Status: Offline Sonork: 100.1605717 Thanks Meter: 1,052	but what cable or rx, tx we are use ????????????????