2100 contact service with griffin - GSM-Forum

djyash · 11-17-2003, 16:41

Hi all
I really need your help guys.i have one 2100 which was working but sometimes on sms was lag,so i have flash it ,but after flash i get contact service .the imei:-001163881>000<3 when i change it with rolis 1.8 it does not change ,with jordik it says imei change but it stays the same.

C:\Program Files\Nokia\Phoenix\Flash3\Iw28f008.tia
Erasing flash ...
00200000 - 003FBFFF
Flashing MCU ...
Flashing PPM ...
Flashing DONE
Resetting phone to set FAID ....
V 05.11/19-02-03/NAM-2/(c) NMP.
IMEI: 001163881>000<3
MSID: 83E937AC9921590CCF5E32EAB0
FAID: B14C6AD9EC4E190AD9FE810E
FAID OK
FactorySet OK
You can disconnect the phone

So i have try to flash with version 5.41 but after flashing it is stays contact service.when read imei with rolis 1.8 it gives me :-351522002842050 but original imei :-656565656565656

i have try all wait to repair the imei but i cannot please help me guys.I have use eeprom tools also but in vain.

I have also use knok to flash the eeprom of the 2100 but it can not be flash with it ,it always says cannot prepared phone.i have also add the 00B000EA: Sharp LRS13A11, Alias_ID=00898890 to
dev_list.fps in knok.

C:\Program Files\Nokia\Phoenix\Flash3\Iw28f008.tia
Erasing flash ...
00200000 - 003FBFFF
Flashing MCU ...
Flashing PPM ...
Flashing DONE
Resetting phone to set FAID ....
V 05.41/06-05-03/NAM-2/(c) NMP.
IMEI: 351522002842050
MSID: 83021414986E0C36164EDC5237
FAID: 1C87C8E10BAE2D4A63376401
FAID OK
FactorySet OK
You can disconnect the phone

PLEASE HELP CLIENT WILL KILL ME.....

cheers
djyash

djyash · 11-17-2003, 18:12

I think eeprom is damaged is there any way to upload virgin eeprom to 2100 with griffin.Cause i cannot with knok ,rolis dct3 flasher ,geoflash,please let me know what to do .

PLEASE HELP MY FRIENDS

Thanks in advance
yash

alex-andro · 11-17-2003, 19:36

download full backup file
link :http://www.handy-flashpage****/
.....
upload phone....

change imei
....faid.

djyash · 11-17-2003, 21:40

Hi alex-andro

Thanks for replying

I have downloaded the full backup but as i said in my post i cannot flash my phone with knok it says:-

Lead's kNok-Phoenix - build 1
based on kNok - Engine build 22, Frontend build 18

Thanks goes out for the following:
Dejan, Kodo, Viper, Jozso (for hardware and cable support
and of course beta testing), Bph&Co, Saras, IceDragon,
Steina, Epilog, Invisible, Jethro, H-tom, AlAraf, Lead
and all the others who supports knok...
FLS1_ConfigurateBootstrapDCT3 : checksum is 4A8B
FLE5_DirectInitialiseBootstrapDCT3 : Press power on (if needed)
FLS1_GeneralSendBootstrapDCT3 : bootstrap seems to be running
FLS1_PreparePhone : detected NMP is NAM-2
Cannot prepare phone

With griffin the phone is flashing but knok and geoflash it is not working .the file i downloaded is in format .fls .can you please tell me which other soft i can use to upload .fls to 2100.

Thanks in advance
yash

djyash · 11-17-2003, 21:48

Forget to say when i use Geocadin flasher 2.0 to flash the 2100

i get this error :-

D:\laptop\New nokia\flash 2100\2100-5.49FUBU.fls (2097152 bytes)

Waiting for phone to respond .
(please POWER ON phone if necessary).
Error: Load boot data failed. Boot not responding.

Why?

Please let me know how to solve this problem

Thanks in advance
yash

lc5829 · 11-17-2003, 21:54

Seems quite a stupid answer, but I also had problems like this with my Matrixflasher. All in these cases I used my old Unibox with built in Dejan flasher. After many tries somehow it worked out. So if you have an old Dejan flasher, you could give it a try.
Well, it's not a fully helpful idea, but might work.

Good luck.

BR

djyash · 11-17-2003, 22:02

Hi ic5829

I don't have dejan dongle .
In Flasher rolis ver 4.79 :-
2100 is not supported ,i have try to select 3330 and then flash the 2100 but it says :-
V 05.11.19-02-03.NAM-2.(c) NMP.
FLASH TYPE UNKNOWN

Is there any new version of rolis which support 2100 or any other soft which can flash 2100 without any problem.

Really need you help guys.

NBG · 11-17-2003, 22:50

You have a sharp flash inside and you must edit config file for flasher that you use :knok ,rolis etc.
Then when you put a new pmm-eeprom file flash it with grifiin and latest flash 5.49.
Then change imei remove 4 locks and phone will workin

djyash · 11-18-2003, 09:07

Hi nbg
Thanks for helping
As you can see above i have already edit the config for knok and
add the 00B000EA: Sharp LRS13A11, Alias_ID=00898890 to
dev_list.fps in knok.

If you have a 1000% tested knok with sharp flash ic ,please sent it to me [email protected].

By the way i have already flash it will ver 5.49 but it is still contact service and when reads imei with jordik or nokia tool:-

Mcu software:5.49
Imei:-351522002842050(this imei is good)
Original Imei:-65656565656(how to change this one???)
Sec code:-0000
msid:-83021414986E0C36164EDC5237
etc......

But i cannot change the original imei phone stay contact service,but update faid it works ,
All 4 locks closed ,cannot open .

Please help

Cheers
Djyash

djyash · 11-18-2003, 13:46

Thanks all

Problem solved.

Cheers
Djyash

crusher · 11-26-2003, 17:21

tell us please that HOW did you solve this?
I have collected 20 such phones for bucks

djyash · 11-26-2003, 22:01

@crusher

Contact me on msn messenger i will send you the flash file .Have you try to flash your phone with latest flash?which flasher you are using.Let me know .

Cheers
Djyash

ADD-GSM · 11-27-2003, 11:03

which soft and flah file did u use to solve ur problem please share with us

djyash · 11-27-2003, 14:08

Hi all

I have use Lead's kNok-Phoenix to flash the 2100 but you need latest loaders and fia for new 2100 with sharp flash .
I have use Version 5.41 full to flash the phone after flashing i have use4 noktool 1.8 to change imei ,update faid ,clear simlock and boom phone works.

If anyone need the new loaders and the flasher juste write you email address here .

I have repair more than 28 phones 2100 contact service by this method . I am sure this thread is 1000% sure to repair your 2100 ,please rate this thread

Thanks in advance
yash

crusher · 11-28-2003, 03:26

please drop them to me.

11-17-2003, 16:41	#1 (permalink)
djyash No Life Poster Join Date: Sep 2002 Location: mauritius Posts: 1,785 Member: 15162 Status: Offline Thanks Meter: 61	2100 contact service with griffin Hi all I really need your help guys.i have one 2100 which was working but sometimes on sms was lag,so i have flash it ,but after flash i get contact service .the imei:-001163881>000<3 when i change it with rolis 1.8 it does not change ,with jordik it says imei change but it stays the same. C:\Program Files\Nokia\Phoenix\Flash3\Iw28f008.tia Erasing flash ... 00200000 - 003FBFFF Flashing MCU ... Flashing PPM ... Flashing DONE Resetting phone to set FAID .... V 05.11/19-02-03/NAM-2/(c) NMP. IMEI: 001163881>000<3 MSID: 83E937AC9921590CCF5E32EAB0 FAID: B14C6AD9EC4E190AD9FE810E FAID OK FactorySet OK You can disconnect the phone So i have try to flash with version 5.41 but after flashing it is stays contact service.when read imei with rolis 1.8 it gives me :-351522002842050 but original imei :-656565656565656 i have try all wait to repair the imei but i cannot please help me guys.I have use eeprom tools also but in vain. I have also use knok to flash the eeprom of the 2100 but it can not be flash with it ,it always says cannot prepared phone.i have also add the 00B000EA: Sharp LRS13A11, Alias_ID=00898890 to dev_list.fps in knok. C:\Program Files\Nokia\Phoenix\Flash3\Iw28f008.tia Erasing flash ... 00200000 - 003FBFFF Flashing MCU ... Flashing PPM ... Flashing DONE Resetting phone to set FAID .... V 05.41/06-05-03/NAM-2/(c) NMP. IMEI: 351522002842050 MSID: 83021414986E0C36164EDC5237 FAID: 1C87C8E10BAE2D4A63376401 FAID OK FactorySet OK You can disconnect the phone PLEASE HELP CLIENT WILL KILL ME..... cheers djyash

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2100 contact service with twister??	brogdan	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	11	01-08-2005 09:10
2100 Contact Service	kiss89	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	10	10-03-2004 08:12
3310 , cant remove CONTACT SERVICE with griffin	Slavonac	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	7	04-22-2004 20:12
Nokia 2100 Contact service	thunoy	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	09-10-2003 09:46
2100 contact service new flash chip[sharp]	drnele	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	14	08-05-2003 19:10

11-17-2003, 18:12	#2 (permalink)
djyash No Life Poster Join Date: Sep 2002 Location: mauritius Posts: 1,785 Member: 15162 Status: Offline Thanks Meter: 61	I think eeprom is damaged is there any way to upload virgin eeprom to 2100 with griffin.Cause i cannot with knok ,rolis dct3 flasher ,geoflash,please let me know what to do . PLEASE HELP MY FRIENDS Thanks in advance yash

11-17-2003, 19:36	#3 (permalink)
alex-andro Freak Poster Join Date: Sep 2003 Location: Russia Posts: 259 Member: 40390 Status: Offline Thanks Meter: 0	download full backup file link :http://www.handy-flashpage****/ ..... upload phone.... change imei ....faid.

11-17-2003, 21:40	#4 (permalink)
djyash No Life Poster Join Date: Sep 2002 Location: mauritius Posts: 1,785 Member: 15162 Status: Offline Thanks Meter: 61	Hi alex-andro Thanks for replying I have downloaded the full backup but as i said in my post i cannot flash my phone with knok it says:- Lead's kNok-Phoenix - build 1 based on kNok - Engine build 22, Frontend build 18 Thanks goes out for the following: Dejan, Kodo, Viper, Jozso (for hardware and cable support and of course beta testing), Bph&Co, Saras, IceDragon, Steina, Epilog, Invisible, Jethro, H-tom, AlAraf, Lead and all the others who supports knok... FLS1_ConfigurateBootstrapDCT3 : checksum is 4A8B FLE5_DirectInitialiseBootstrapDCT3 : Press power on (if needed) FLS1_GeneralSendBootstrapDCT3 : bootstrap seems to be running FLS1_PreparePhone : detected NMP is NAM-2 Cannot prepare phone With griffin the phone is flashing but knok and geoflash it is not working .the file i downloaded is in format .fls .can you please tell me which other soft i can use to upload .fls to 2100. Thanks in advance yash

11-17-2003, 21:48	#5 (permalink)
djyash No Life Poster Join Date: Sep 2002 Location: mauritius Posts: 1,785 Member: 15162 Status: Offline Thanks Meter: 61	Forget to say when i use Geocadin flasher 2.0 to flash the 2100 i get this error :- D:\laptop\New nokia\flash 2100\2100-5.49FUBU.fls (2097152 bytes) Waiting for phone to respond . (please POWER ON phone if necessary). Error: Load boot data failed. Boot not responding. Why? Please let me know how to solve this problem Thanks in advance yash

11-17-2003, 21:54	#6 (permalink)
lc5829 Freak Poster Join Date: Dec 2002 Location: Zooropa Age: 42 Posts: 490 Member: 18832 Status: Offline Thanks Meter: 18	Seems quite a stupid answer, but I also had problems like this with my Matrixflasher. All in these cases I used my old Unibox with built in Dejan flasher. After many tries somehow it worked out. So if you have an old Dejan flasher, you could give it a try. Well, it's not a fully helpful idea, but might work. Good luck. BR

11-17-2003, 22:02	#7 (permalink)
djyash No Life Poster Join Date: Sep 2002 Location: mauritius Posts: 1,785 Member: 15162 Status: Offline Thanks Meter: 61	Hi ic5829 I don't have dejan dongle . In Flasher rolis ver 4.79 :- 2100 is not supported ,i have try to select 3330 and then flash the 2100 but it says :- V 05.11.19-02-03.NAM-2.(c) NMP. FLASH TYPE UNKNOWN Is there any new version of rolis which support 2100 or any other soft which can flash 2100 without any problem. Really need you help guys.

11-17-2003, 22:50	#8 (permalink)
NBG Freak Poster Join Date: Jan 2001 Location: Beograd,Serbia Age: 54 Posts: 451 Member: 3101 Status: Offline Thanks Meter: 6	You have a sharp flash inside and you must edit config file for flasher that you use :knok ,rolis etc. Then when you put a new pmm-eeprom file flash it with grifiin and latest flash 5.49. Then change imei remove 4 locks and phone will workin

11-18-2003, 09:07	#9 (permalink)
djyash No Life Poster Join Date: Sep 2002 Location: mauritius Posts: 1,785 Member: 15162 Status: Offline Thanks Meter: 61	Hi nbg Thanks for helping As you can see above i have already edit the config for knok and add the 00B000EA: Sharp LRS13A11, Alias_ID=00898890 to dev_list.fps in knok. If you have a 1000% tested knok with sharp flash ic ,please sent it to me [email protected]. By the way i have already flash it will ver 5.49 but it is still contact service and when reads imei with jordik or nokia tool:- Mcu software:5.49 Imei:-351522002842050(this imei is good) Original Imei:-65656565656(how to change this one???) Sec code:-0000 msid:-83021414986E0C36164EDC5237 etc...... But i cannot change the original imei phone stay contact service,but update faid it works , All 4 locks closed ,cannot open . Please help Cheers Djyash

11-18-2003, 13:46	#10 (permalink)
djyash No Life Poster Join Date: Sep 2002 Location: mauritius Posts: 1,785 Member: 15162 Status: Offline Thanks Meter: 61	Thanks all Problem solved. Cheers Djyash

11-26-2003, 17:21	#11 (permalink)
crusher No Life Poster Join Date: Dec 2001 Location: [winscard.SCardTransmit] Posts: 1,835 Member: 8023 Status: Offline Thanks Meter: 13	tell us please that HOW did you solve this? I have collected 20 such phones for bucks

11-26-2003, 22:01	#12 (permalink)
djyash No Life Poster Join Date: Sep 2002 Location: mauritius Posts: 1,785 Member: 15162 Status: Offline Thanks Meter: 61	@crusher Contact me on msn messenger i will send you the flash file .Have you try to flash your phone with latest flash?which flasher you are using.Let me know . Cheers Djyash

11-27-2003, 11:03	#13 (permalink)
ADD-GSM No Life Poster Join Date: Sep 2002 Location: kumasi Age: 46 Posts: 784 Member: 16077 Status: Offline Thanks Meter: 0	which soft and flah file did u use to solve ur problem please share with us

11-27-2003, 14:08	#14 (permalink)
djyash No Life Poster Join Date: Sep 2002 Location: mauritius Posts: 1,785 Member: 15162 Status: Offline Thanks Meter: 61	Hi all I have use Lead's kNok-Phoenix to flash the 2100 but you need latest loaders and fia for new 2100 with sharp flash . I have use Version 5.41 full to flash the phone after flashing i have use4 noktool 1.8 to change imei ,update faid ,clear simlock and boom phone works. If anyone need the new loaders and the flasher juste write you email address here . I have repair more than 28 phones 2100 contact service by this method . I am sure this thread is 1000% sure to repair your 2100 ,please rate this thread Thanks in advance yash

11-28-2003, 03:26	#15 (permalink)
crusher No Life Poster Join Date: Dec 2001 Location: [winscard.SCardTransmit] Posts: 1,835 Member: 8023 Status: Offline Thanks Meter: 13	please drop them to me.