3650 - how to manually put phone in local mode for use with griffin? - GSM-Forum

Alinus · 09-12-2003, 08:51

I have 1 piece of 3650 that hangs on Nokia logo ( it does not fade off after hanging...it justs stays this way with the screen lights on for hours)

i can flash it with griffin no problem

but i cannot reset factory settings, format user area or unlock (even if griffin says succesfull on format FS or User area it does not show the process barr)

I need sollution to manualy put phone in Local mode so that i can reset FS and format user area with griffin.

plz help with info !

mudchild · 09-12-2003, 13:28

try to modify your cable by altering your bsi line.

Alinus · 09-12-2003, 13:37

u mean to short bsi and - ?

i had tried that...not working

mudchild · 09-12-2003, 14:55

this is what I did to my cable

connect a 6.8k resistor across bsi and ground
then connect a 3.3k resistor in series with bsi line.
my cable has a green wire for bsi line.
hope this helps u.

Alinus · 09-12-2003, 15:36

i'll try it and see if is better.

10x for asisstance

also 10x to my friend essoay for his help

mudchild · 09-12-2003, 15:43

I already have repaired many 3650s with hangs on nokia logo
with this modified cable and works for me.

Alinus · 09-12-2003, 20:02

10x

now phone enters local mode...

but no help on unlocking, reseting FS, Formating User Area

i had tried all griffin versions from 1.983 to 2.02 - unlocking not works

same on flashing (succesfull) and reset FS after....unsuccesfull.
same on format user area: nor progress bar appears...but griffin fails.

i also flashed the 2.16 HK firmware in it and put it in the 4 nokia logo faid state...tried to upload pmerase.fia....but no help....phone does not come out from this state.
if i flash it again on 3.16 firmware...phone stucks to nokia logo again (the 4 faid logo problem dissapears).

so i'm kinda out of sollutions here...

PS. with modified cable after mudchild scheeme I succesfully repaired one 3650 in "Phone startup failed" state....but this ones who stucks at Nokia logo is begining to give me an headache

also 2 yellow cards on Griffin produccers:
1. bad cables....is the 3'rd cable that had problems...and had to adjust myself...
2. bugs in software....

Alinus · 09-15-2003, 12:57

HELOO !!!!

Don't tell me that no griffin user didn't come on this problem....

Noone can give a good sollution for it?

mtony969 · 09-15-2003, 13:07

i have the problem but dont have the solution it may be to use neelix but can get no feedback neelix not in this forum

Alinus · 09-15-2003, 13:12

i don't want to think that griffin can't handle it....

cause if it can't off he goes and neelix or prodigy take his place.

but i am hope it can be done with griffin, so i am still waiting for a sollution

cellcare · 09-18-2003, 13:41

please help me how to make 3650 hang problam

09-12-2003, 08:51	#1 (permalink)
Alinus No Life Poster Join Date: Aug 2002 Location: Romania, The Bla Bla Country Age: 33 Posts: 1,934 Member: 14279 Status: Offline Thanks: 20 Thanked 23 Times in 16 Posts	3650 - how to manually put phone in local mode for use with griffin? I have 1 piece of 3650 that hangs on Nokia logo ( it does not fade off after hanging...it justs stays this way with the screen lights on for hours) i can flash it with griffin no problem but i cannot reset factory settings, format user area or unlock (even if griffin says succesfull on format FS or User area it does not show the process barr) I need sollution to manualy put phone in Local mode so that i can reset FS and format user area with griffin. plz help with info !

09-12-2003, 20:02	#7 (permalink)
Alinus No Life Poster Join Date: Aug 2002 Location: Romania, The Bla Bla Country Age: 33 Posts: 1,934 Member: 14279 Status: Offline Thanks: 20 Thanked 23 Times in 16 Posts	10x now phone enters local mode... but no help on unlocking, reseting FS, Formating User Area i had tried all griffin versions from 1.983 to 2.02 - unlocking not works same on flashing (succesfull) and reset FS after....unsuccesfull. same on format user area: nor progress bar appears...but griffin fails. i also flashed the 2.16 HK firmware in it and put it in the 4 nokia logo faid state...tried to upload pmerase.fia....but no help....phone does not come out from this state. if i flash it again on 3.16 firmware...phone stucks to nokia logo again (the 4 faid logo problem dissapears). so i'm kinda out of sollutions here... PS. with modified cable after mudchild scheeme I succesfully repaired one 3650 in "Phone startup failed" state....but this ones who stucks at Nokia logo is begining to give me an headache also 2 yellow cards on Griffin produccers: 1. bad cables....is the 3'rd cable that had problems...and had to adjust myself... 2. bugs in software.... Last edited by Alinus; 09-12-2003 at 20:07.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Haw to Put safe the Phone in Local Mode with Fbus.	vali23_mm	BB5 Box by D.K.	27	07-05-2009 14:00
how to got your phone in local mode	Swazi_Gsm	BB5KING	2	11-09-2008 12:02
my MT-Box can't read anything!! But puts phone in local mode..	luigivsf	MT-BOX	1	07-21-2007 16:40
How to put phone in local mode wich Phoenix	nzeiga	MT-BOX	1	03-17-2007 10:47

09-12-2003, 13:28	#2 (permalink)
mudchild Freak Poster Join Date: Jul 2002 Location: philippines Age: 31 Posts: 126 Member: 14140 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	try to modify your cable by altering your bsi line.

09-12-2003, 13:37	#3 (permalink)
Alinus No Life Poster Join Date: Aug 2002 Location: Romania, The Bla Bla Country Age: 33 Posts: 1,934 Member: 14279 Status: Offline Thanks: 20 Thanked 23 Times in 16 Posts	u mean to short bsi and - ? i had tried that...not working

09-12-2003, 14:55	#4 (permalink)
mudchild Freak Poster Join Date: Jul 2002 Location: philippines Age: 31 Posts: 126 Member: 14140 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	this is what I did to my cable connect a 6.8k resistor across bsi and ground then connect a 3.3k resistor in series with bsi line. my cable has a green wire for bsi line. hope this helps u.

09-12-2003, 15:36	#5 (permalink)
Alinus No Life Poster Join Date: Aug 2002 Location: Romania, The Bla Bla Country Age: 33 Posts: 1,934 Member: 14279 Status: Offline Thanks: 20 Thanked 23 Times in 16 Posts	i'll try it and see if is better. 10x for asisstance also 10x to my friend essoay for his help

09-12-2003, 15:43	#6 (permalink)
mudchild Freak Poster Join Date: Jul 2002 Location: philippines Age: 31 Posts: 126 Member: 14140 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	I already have repaired many 3650s with hangs on nokia logo with this modified cable and works for me.

09-15-2003, 12:57	#8 (permalink)
Alinus No Life Poster Join Date: Aug 2002 Location: Romania, The Bla Bla Country Age: 33 Posts: 1,934 Member: 14279 Status: Offline Thanks: 20 Thanked 23 Times in 16 Posts	HELOO !!!! Don't tell me that no griffin user didn't come on this problem.... Noone can give a good sollution for it?

09-15-2003, 13:07	#9 (permalink)
mtony969 No Life Poster Join Date: Mar 2003 Location: england Age: 54 Posts: 3,033 Member: 24552 Status: Offline Thanks: 13 Thanked 12 Times in 11 Posts	i have the problem but dont have the solution it may be to use neelix but can get no feedback neelix not in this forum

09-15-2003, 13:12	#10 (permalink)
Alinus No Life Poster Join Date: Aug 2002 Location: Romania, The Bla Bla Country Age: 33 Posts: 1,934 Member: 14279 Status: Offline Thanks: 20 Thanked 23 Times in 16 Posts	i don't want to think that griffin can't handle it.... cause if it can't off he goes and neelix or prodigy take his place. but i am hope it can be done with griffin, so i am still waiting for a sollution

09-18-2003, 13:41	#11 (permalink)
cellcare Freak Poster Join Date: Dec 2002 Location: uae Posts: 326 Member: 19141 Status: Offline Thanks: 0 Thanked 31 Times in 3 Posts	please help me how to make 3650 hang problam