6600_fullerase_file

[LogoMan]

I try to flash a 6600 4xblink can't repair w/ format user area>load as PPM>result phone was dead>full flash again phone back to normal state 4xblink, flash again w/ erase file this time as MCU>result phone was dead for second time>full flash again phone back to normal state 4xblink


Anybody tested it?


BR,
LogoMan

[sto]

the phone is dead, you gotta change uem and rebuild imei. i am not sure whether griffin support 6600 imei rebuild yet. ask them for solution.

p/s dun simply use full erase, it erase everything in the flash ram.

[e2nak]

phone is not dead because it still accept flashing the only thing is procedure to make it work still ur missing something.

[LogoMan]

Thank guys for the replies, it's a normal result when flashing erase_fia files result phone will be the dead 'coz it erases the flash as my friend said and he tested it and me too>full flash phone, will be alive again>unlock>format>upload PM>done



BR,
LogoMan

[Uvedovle]

Soltion for dead 6600 is flash in manual mode a chinesse flash and later reflash it with desired ppm.


Regards

[livewirecebu]

let me know if you have anything for these. beats me too.

Originally Posted by LogoMan

Thank guys for the replies, it's a normal result when flashing erase_fia files result phone will be the dead 'coz it erases the flash as my friend said and he tested it and me too>full flash phone, will be alive again>unlock>format>upload PM>done



BR,
LogoMan

[LogoMan]

Originally Posted by livewirecebu

let me know if you have anything for these. beats me too.

Ok


BR,
LogoMan

[Uvedovle]

@Logoman


You read my post man?

It really works, so... is your choose.



Best regards

[LogoMan]

Originally Posted by Uvedovle

@Logoman


You read my post man?

It really works, so... is your choose.



Best regards

Thanks man

BR,
LogoMan

[sto]

kick me if u could repair it without a log file or new uem. of coz b4 u kick me, tell me how to do first. hahaha

[Renda]

it is not full erase because you do not have to write RPL. that means Imei area in flash is not erased. I tested this solution (fulerase.bin) on many phones. But sometimes (hanging, apps closing) is only help Flash IC changing. By the way UEM is glued, so ....

Renda

[Uvedovle]

Please, tell as how are things...

[Renda]

Originally Posted by Uvedovle

Please, tell as how are things...

So, It is quite easy. You write erase file as PPM. Then you have clear flash (not all but enought). Then you write Mcu and PPm latest version. When you then power on the phone you will get Contact Retailer. So with Matrix it is easy to get rid of it. But with Griffin it is not so easy. First solution is try it many times till you get the OK. The second one I tested is do not power the phone after the flashing and format user area. I get OK almoast everytime. But if you get the OK too quickly (less then 2 seconds) it is not erasing and you have to try it on other HW (Matrix,...). After tahat you get Insert SIM and you anly have to write PM a Unlock it.

When after that the phone again hangs or close apps by itself. then it is not SW problem but HW...mainly Flash IC's (you can use Flash's from 8310, they are smaller, but they are working, you will need 4 chips). But after that you will have to write RPL.
Bye, Renda