2310 V 3.21 updating firmeware error - GSM-Forum

8051 · 02-08-2007, 11:30

Hi,

I tried to unlock 2310 using F1 with latest software NSS.exe Beta 1.0.38.8 but it seems there is a problem that i can't find it

NSS: DCT4PLUS Simlock Rebuild started.
NSS: Reading phone info...Done.
NSS: ->SW: V 3.21 20-07-06 RM-189 (c) NMP
NSS: ->IMEI: 359746xxxxxxxxx
NSS: Updating Firmware...NSS: Updating Firmware...Error!

Please help

Br.

simply amazing · 02-09-2007, 03:05

flash it with latest firmware!!!!!!!

br

Bph&co · 02-09-2007, 08:49

Hi,

See if you can flash the phone from the Flash menu. If ok, then enable debugging in the fls dll while unlocking and check the error reason.

Regards

8051 · 02-09-2007, 14:19

Quote:

Originally Posted by Bph&co

Hi,

See if you can flash the phone from the Flash menu. If ok, then enable debugging in the fls dll while unlocking and check the error reason.

Regards

Hi,

thanks for reply, i tried to flash it but without success , coz can't erase Area: 01010000-013BFFFF here is the screen shot

Bph&co · 02-09-2007, 15:22

Hi,

Works fine with me. Probably your loaders are bad.

Regards

8051 · 02-09-2007, 15:45

Hi,

Well, i tested it with ufs and flash passed succesfully that means loader is good ? !

BR.

**Freestyler2000** · 02-15-2007, 09:37

Hi,
Please put a log here of the startup screen where we can see the loaders version

Best regards
Daniel

8051 · 02-15-2007, 11:42

Hi

Too late ... all in all thank you very much !

xpmobile · 02-17-2007, 00:21

Quote:

Originally Posted by 8051

Hi

Too late ... all in all thank you very much !

Important notice. Please make sure your cable BSI consist of 3.3k resistor or the battery BSI pin is touching the cable pin. Unfortunately alot of cable from China do not use the correct resistor basically they are custom made for box other boxes. (Unfortunately this cable do not even work well on this boxes too). Currently 1100, 6230, 3100 cables from some factory do not use 3.3k or even 48k on the vbatt to bsi resistor for their cables.

Best Regards
Alan Tan

02-08-2007, 11:30	#1 (permalink)
8051 Freak Poster Join Date: Sep 2002 Location: No Man's Land Posts: 432 Member: 15858 Status: Online Thanks: 4 Thanked 8 Times in 7 Posts	2310 V 3.21 updating firmeware error Hi, I tried to unlock 2310 using F1 with latest software NSS.exe Beta 1.0.38.8 but it seems there is a problem that i can't find it NSS: DCT4PLUS Simlock Rebuild started. NSS: Reading phone info...Done. NSS: ->SW: V 3.21 20-07-06 RM-189 (c) NMP NSS: ->IMEI: 359746xxxxxxxxx NSS: Updating Firmware...NSS: Updating Firmware...Error! Please help Br.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Smart Phone Tool 1.3.21 Update ;) Mega Bomb Inside!!!!	blang	Z3X-Team Products	67	02-14-2012 07:11
Samsung I8910 , İmei Change doenst work for me on 1.3.21 Update	powerplay83	Z3X-Team Products	3	11-02-2009 09:32

02-09-2007, 03:05	#2 (permalink)
simply amazing Freak Poster Join Date: Aug 2005 Location: inside smart Posts: 337 Member: 175216 Status: Offline Thanks: 35 Thanked 58 Times in 26 Posts	flash it with latest firmware!!!!!!! br

02-09-2007, 08:49	#3 (permalink)
Bph&co Product Supporter and selective member Nsspro Join Date: Feb 2000 Location: UK Posts: 3,166 Member: 1024 Status: Offline Thanks: 618 Thanked 5,447 Times in 655 Posts	Hi, See if you can flash the phone from the Flash menu. If ok, then enable debugging in the fls dll while unlocking and check the error reason. Regards

02-09-2007, 15:22	#5 (permalink)
Bph&co Product Supporter and selective member Nsspro Join Date: Feb 2000 Location: UK Posts: 3,166 Member: 1024 Status: Offline Thanks: 618 Thanked 5,447 Times in 655 Posts	Hi, Works fine with me. Probably your loaders are bad. Regards

02-09-2007, 15:45	#6 (permalink)
8051 Freak Poster Join Date: Sep 2002 Location: No Man's Land Posts: 432 Member: 15858 Status: Online Thanks: 4 Thanked 8 Times in 7 Posts	Hi, Well, i tested it with ufs and flash passed succesfully that means loader is good ? ! BR.

02-15-2007, 09:37	#7 (permalink)
Freestyler2000 Product Manager Join Date: Dec 2000 Location: UK Posts: 727 Member: 2868 Status: Offline Thanks: 92 Thanked 514 Times in 60 Posts	Hi, Please put a log here of the startup screen where we can see the loaders version Best regards Daniel

02-15-2007, 11:42	#8 (permalink)
8051 Freak Poster Join Date: Sep 2002 Location: No Man's Land Posts: 432 Member: 15858 Status: Online Thanks: 4 Thanked 8 Times in 7 Posts	Hi Too late ... all in all thank you very much !